main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lt1012s8: viewers rendered from the public page · Ray
lt1012s8-etched.glb Publish 0.1.0 · Ray
lt1012s8-etched.step lt1012s8: factory component page (tier=mfr) · Ray
lt1012s8-hero.glb lt1012s8: hero GLB from the etched model (keeps the MPN mark) · Ray
lt1012s8-hero.overlay.json Publish 0.1.0 · Ray
lt1012s8.glb Publish 0.1.0 · Ray
lt1012s8.kicad_mod Publish 0.1.0 · Ray
lt1012s8.kicad_sym Publish 0.1.0 · Ray
lt1012s8.lbr Publish 0.1.0 · Ray
lt1012s8.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

LT1012S8#PBF

Analog Devices · Operational Amplifier · SO-8

LT1012S8#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOS TRIM passive Offset null terminal; input offset voltage can be adjusted over a ±800µV range with a 5k to 100k potentiometer.
2 -IN input Inverting input, protected by back-to-back diodes; differential input voltages above 1V cause excessive current through the protection diodes unless limiting resistance is used, and differential input current is absolute-max rated at ±10mA.
3 +IN input Non-inverting input, protected by back-to-back diodes; input voltage is absolute-max rated at ±20V and common mode input range is ±13.5V.
4 V- power_in Negative supply; the LT1012 operates from supplies down to ±1.2V and absolute-max supply voltage is ±20V.
5 VOS TRIM passive Second offset null terminal, used with pin 1 for the ±800µV offset adjustment via a 5k to 100k potentiometer.
6 OUT output Amplifier output, swinging to ±13V minimum at RL = 10kΩ, with indefinite output short-circuit duration permitted.
7 V+ power_in Positive supply; the LT1012 operates from supplies down to ±1.2V and absolute-max supply voltage is ±20V.
8 OVER COMP passive Overcompensation terminal for connecting capacitor CS to improve capacitive load handling, narrow noise bandwidth, or stabilize circuits with gain in the feedback loop.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SO-8
Category Amplifiers
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VOS 15 120 µV 4
Input Offset Voltage (Note 3) VOS 25 180 µV Note 3: VMIN ≤ VS ≤ ±20V, -13.5V ≤ VCM ≤ 13.5V 4
Input Offset Current IOS 50 280 pA 4
Input Offset Current (Note 3) IOS 60 380 pA Note 3: VMIN ≤ VS ≤ ±20V, -13.5V ≤ VCM ≤ 13.5V 4
Input Bias Current IB 80 300 pA 4
Input Bias Current (Note 3) IB 120 400 pA Note 3: VMIN ≤ VS ≤ ±20V, -13.5V ≤ VCM ≤ 13.5V 4
Input Noise Voltage Density en 17 30 nV√Hz fO = 10Hz (Note 5) 4
Input Noise Voltage Density en 14 22 nV√Hz fO = 1000Hz (Note 5) 4
Large-Signal Voltage Gain AVOL 200 2000 V/mV VOUT = ±12V, RL ≥ 10kΩ 4
Large-Signal Voltage Gain AVOL 120 1000 V/mV VOUT = ±10V, RL ≥ 2kΩ 4
Common Mode Rejection Ratio CMRR 110 132 dB VCM = ±13.5V 4
Power Supply Rejection Ratio PSRR 110 132 dB VS = ±1.2V to ±20V 4
Input Voltage Range 13.5 14 V 4
Output Voltage Swing VOUT 13 14 V RL = 10kΩ 4
Slew Rate 0.1 0.2 V/µs 4
Supply Current IS 380 600 µA (Note 3) 4
Input Offset Voltage (over 0°C to 70°C) VOS 30 200 µV ● Over 0°C ≤ TA ≤ 70°C 7
Input Offset Voltage (Note 3, over 0°C to 70°C) VOS 45 270 µV ● Over 0°C ≤ TA ≤ 70°C; Note 3 7
Average Temperature Coefficient of Input Offset Voltage 0.3 1.8 µV/°C ● Over 0°C ≤ TA ≤ 70°C 7
Input Offset Current (over 0°C to 70°C) IOS 60 380 pA ● Over 0°C ≤ TA ≤ 70°C 7
Input Offset Current (Note 3, over 0°C to 70°C) IOS 80 500 pA ● Over 0°C ≤ TA ≤ 70°C; Note 3 7
Average Temperature Coefficient of Input Offset Current 0.4 4 pA/°C ● Over 0°C ≤ TA ≤ 70°C 7
Input Bias Current (over 0°C to 70°C) IB 100 420 pA ● Over 0°C ≤ TA ≤ 70°C 7
Input Bias Current (Note 3, over 0°C to 70°C) IB 150 550 pA ● Over 0°C ≤ TA ≤ 70°C; Note 3 7
Average Temperature Coefficient of Input Bias Current 0.5 5 pA/°C ● Over 0°C ≤ TA ≤ 70°C 7
Large-Signal Voltage Gain (over 0°C to 70°C) AVOL 150 1500 V/mV ● Over 0°C ≤ TA ≤ 70°C; VOUT = ±12V, RL ≥ 10kΩ 7
Large-Signal Voltage Gain (over 0°C to 70°C) AVOL 100 800 V/mV ● Over 0°C ≤ TA ≤ 70°C; VOUT = ±10V, RL ≥ 2kΩ 7
Common Mode Rejection Ratio (over 0°C to 70°C) CMRR 108 130 dB ● Over 0°C ≤ TA ≤ 70°C; VCM = ±13.5V 7
Power Supply Rejection Ratio (over 0°C to 70°C) PSRR 108 128 dB ● Over 0°C ≤ TA ≤ 70°C; VS = ±1.3V to ±20V 7
Input Voltage Range (over 0°C to 70°C) 13.5 V ● Over 0°C ≤ TA ≤ 70°C 7
Output Voltage Swing (over 0°C to 70°C) VOUT 13 14 V ● Over 0°C ≤ TA ≤ 70°C; RL = 10kΩ 7
Supply Current (over 0°C to 70°C) IS 400 800 µA ● Over 0°C ≤ TA ≤ 70°C 7
Supply Voltage -20 20 V Printed ±20V 2
Input Voltage -20 20 V Printed ±20V 2
Differential Input Current -10 10 mA Note 1 2
Storage Temperature Range -65 150 °C 2
Lead Temperature 300 °C Soldering, 10 sec 2
Maximum Junction Temperature TJMAX 100 °C S8 package 2
Operating Temperature Range 0 70 °C LT1012D/LT1012S8 2
Minimum Supply Voltage VMIN 1.3 V 0°C ≤ TA ≤ 70°C (±1.2V at 25°C), Note 3 7
Thermal Resistance, Junction-to-Ambient θJA 170 °C/W S8 package 2

CAD (KiCad official)

  • Symbol: LT1012S8#PBF
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: lt1012s8-etched.step / lt1012s8-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt1012s8.step / lt1012s8.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (20 pp, sha256 a573b315c2baaf90, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF