3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLT1012S8#PBF
Analog Devices · Operational Amplifier · SO-8
LT1012S8#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOS TRIM | passive | Offset null terminal; input offset voltage can be adjusted over a ±800µV range with a 5k to 100k potentiometer. |
| 2 | -IN | input | Inverting input, protected by back-to-back diodes; differential input voltages above 1V cause excessive current through the protection diodes unless limiting resistance is used, and differential input current is absolute-max rated at ±10mA. |
| 3 | +IN | input | Non-inverting input, protected by back-to-back diodes; input voltage is absolute-max rated at ±20V and common mode input range is ±13.5V. |
| 4 | V- | power_in | Negative supply; the LT1012 operates from supplies down to ±1.2V and absolute-max supply voltage is ±20V. |
| 5 | VOS TRIM | passive | Second offset null terminal, used with pin 1 for the ±800µV offset adjustment via a 5k to 100k potentiometer. |
| 6 | OUT | output | Amplifier output, swinging to ±13V minimum at RL = 10kΩ, with indefinite output short-circuit duration permitted. |
| 7 | V+ | power_in | Positive supply; the LT1012 operates from supplies down to ±1.2V and absolute-max supply voltage is ±20V. |
| 8 | OVER COMP | passive | Overcompensation terminal for connecting capacitor CS to improve capacitive load handling, narrow noise bandwidth, or stabilize circuits with gain in the feedback loop. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SO-8 |
| Category | Amplifiers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | 15 | 120 | µV | 4 | ||
| Input Offset Voltage (Note 3) | VOS | 25 | 180 | µV | Note 3: VMIN ≤ VS ≤ ±20V, -13.5V ≤ VCM ≤ 13.5V | 4 | |
| Input Offset Current | IOS | 50 | 280 | pA | 4 | ||
| Input Offset Current (Note 3) | IOS | 60 | 380 | pA | Note 3: VMIN ≤ VS ≤ ±20V, -13.5V ≤ VCM ≤ 13.5V | 4 | |
| Input Bias Current | IB | 80 | 300 | pA | 4 | ||
| Input Bias Current (Note 3) | IB | 120 | 400 | pA | Note 3: VMIN ≤ VS ≤ ±20V, -13.5V ≤ VCM ≤ 13.5V | 4 | |
| Input Noise Voltage Density | en | 17 | 30 | nV√Hz | fO = 10Hz (Note 5) | 4 | |
| Input Noise Voltage Density | en | 14 | 22 | nV√Hz | fO = 1000Hz (Note 5) | 4 | |
| Large-Signal Voltage Gain | AVOL | 200 | 2000 | V/mV | VOUT = ±12V, RL ≥ 10kΩ | 4 | |
| Large-Signal Voltage Gain | AVOL | 120 | 1000 | V/mV | VOUT = ±10V, RL ≥ 2kΩ | 4 | |
| Common Mode Rejection Ratio | CMRR | 110 | 132 | dB | VCM = ±13.5V | 4 | |
| Power Supply Rejection Ratio | PSRR | 110 | 132 | dB | VS = ±1.2V to ±20V | 4 | |
| Input Voltage Range | 13.5 | 14 | V | 4 | |||
| Output Voltage Swing | VOUT | 13 | 14 | V | RL = 10kΩ | 4 | |
| Slew Rate | 0.1 | 0.2 | V/µs | 4 | |||
| Supply Current | IS | 380 | 600 | µA | (Note 3) | 4 | |
| Input Offset Voltage (over 0°C to 70°C) | VOS | 30 | 200 | µV | ● Over 0°C ≤ TA ≤ 70°C | 7 | |
| Input Offset Voltage (Note 3, over 0°C to 70°C) | VOS | 45 | 270 | µV | ● Over 0°C ≤ TA ≤ 70°C; Note 3 | 7 | |
| Average Temperature Coefficient of Input Offset Voltage | 0.3 | 1.8 | µV/°C | ● Over 0°C ≤ TA ≤ 70°C | 7 | ||
| Input Offset Current (over 0°C to 70°C) | IOS | 60 | 380 | pA | ● Over 0°C ≤ TA ≤ 70°C | 7 | |
| Input Offset Current (Note 3, over 0°C to 70°C) | IOS | 80 | 500 | pA | ● Over 0°C ≤ TA ≤ 70°C; Note 3 | 7 | |
| Average Temperature Coefficient of Input Offset Current | 0.4 | 4 | pA/°C | ● Over 0°C ≤ TA ≤ 70°C | 7 | ||
| Input Bias Current (over 0°C to 70°C) | IB | 100 | 420 | pA | ● Over 0°C ≤ TA ≤ 70°C | 7 | |
| Input Bias Current (Note 3, over 0°C to 70°C) | IB | 150 | 550 | pA | ● Over 0°C ≤ TA ≤ 70°C; Note 3 | 7 | |
| Average Temperature Coefficient of Input Bias Current | 0.5 | 5 | pA/°C | ● Over 0°C ≤ TA ≤ 70°C | 7 | ||
| Large-Signal Voltage Gain (over 0°C to 70°C) | AVOL | 150 | 1500 | V/mV | ● Over 0°C ≤ TA ≤ 70°C; VOUT = ±12V, RL ≥ 10kΩ | 7 | |
| Large-Signal Voltage Gain (over 0°C to 70°C) | AVOL | 100 | 800 | V/mV | ● Over 0°C ≤ TA ≤ 70°C; VOUT = ±10V, RL ≥ 2kΩ | 7 | |
| Common Mode Rejection Ratio (over 0°C to 70°C) | CMRR | 108 | 130 | dB | ● Over 0°C ≤ TA ≤ 70°C; VCM = ±13.5V | 7 | |
| Power Supply Rejection Ratio (over 0°C to 70°C) | PSRR | 108 | 128 | dB | ● Over 0°C ≤ TA ≤ 70°C; VS = ±1.3V to ±20V | 7 | |
| Input Voltage Range (over 0°C to 70°C) | 13.5 | V | ● Over 0°C ≤ TA ≤ 70°C | 7 | |||
| Output Voltage Swing (over 0°C to 70°C) | VOUT | 13 | 14 | V | ● Over 0°C ≤ TA ≤ 70°C; RL = 10kΩ | 7 | |
| Supply Current (over 0°C to 70°C) | IS | 400 | 800 | µA | ● Over 0°C ≤ TA ≤ 70°C | 7 | |
| Supply Voltage | -20 | 20 | V | Printed ±20V | 2 | ||
| Input Voltage | -20 | 20 | V | Printed ±20V | 2 | ||
| Differential Input Current | -10 | 10 | mA | Note 1 | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature | 300 | °C | Soldering, 10 sec | 2 | |||
| Maximum Junction Temperature | TJMAX | 100 | °C | S8 package | 2 | ||
| Operating Temperature Range | 0 | 70 | °C | LT1012D/LT1012S8 | 2 | ||
| Minimum Supply Voltage | VMIN | 1.3 | V | 0°C ≤ TA ≤ 70°C (±1.2V at 25°C), Note 3 | 7 | ||
| Thermal Resistance, Junction-to-Ambient | θJA | 170 | °C/W | S8 package | 2 |
CAD (KiCad official)
- Symbol:
LT1012S8#PBF - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
lt1012s8-etched.step/lt1012s8-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt1012s8.step/lt1012s8.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
a573b315c2baaf90, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).