main
Ray
Publish 0.1.0
cdda96f
LT1008CN8#PBF
Analog Devices · Low Noise Amplifiers (LNA) - RF · PDIP-8
LT1008CN8#PBF from Analog Devices, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COMP1 | passive | Frequency compensation terminal 1, where the external compensation capacitor (standard circuit uses CF of 30pF minimum with pin 8) is connected; leakage into the compensation terminals can affect offset voltage and drift. |
| 2 | -IN | input | Inverting input; differential input current is limited to ±10mA (differential voltages above 1V drive current through the protection diodes) and input voltage is limited to ±20V. |
| 3 | +IN | input | Noninverting input with picoampere bias current (100pA max at 25°C); input voltage is limited to ±20V and the input range is ±13.5V min at VS = ±15V. |
| 4 | V- | power_in | Negative supply, specified for ±2V to ±18V operation and rated to a maximum supply voltage of ±20V. |
| 5 | NC | unconnected | No internal connection. |
| 6 | OUT | output | Op amp output that swings ±13V min into RL = 10k, can deliver 5mA load current, and has indefinite short-circuit duration. |
| 7 | V+ | power_in | Positive supply, specified for ±2V to ±18V operation and rated to a maximum supply voltage of ±20V. |
| 8 | COMP2 | passive | Frequency compensation terminal 2, where the external compensation capacitor is connected (CF between pins 1 and 8, or CS of 100pF in the alternate circuit). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | PDIP-8 |
| Category | RF & Radio |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | -20 | 20 | V | 2 | |||
| Differential Input Current | -10 | 10 | mA | Note 2 | 2 | ||
| Input Voltage | -20 | 20 | V | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature | 300 | °C | Soldering, 10 sec | 2 | |||
| Operating Temperature Range LT1008C | 0 | 70 | °C | LT1008C | 2 | ||
| Maximum Junction Temperature | TJMAX | 150 | °C | N8 package | 2 | ||
| Thermal Resistance Junction-to-Ambient | θJA | 130 | °C/W | N8 8-lead PDIP | 2 | ||
| Input Offset Voltage | VOS | 30 | 120 | μV | VS=±15V, VCM=0V, TA=25°C | 2 | |
| Input Offset Voltage (Note 3) | VOS | 40 | 180 | μV | Note 3, TA=25°C | 2 | |
| Long-Term Input Offset Voltage Stability | 0.3 | μV/Month | 2 | ||||
| Input Offset Current | IOS | 30 | 100 | pA | TA=25°C | 2 | |
| Input Offset Current (Note 3) | IOS | 40 | 150 | pA | Note 3, TA=25°C | 2 | |
| Input Bias Current | IB | 30 | 100 | pA | TA=25°C (±) | 2 | |
| Input Bias Current (Note 3) | IB | 40 | 150 | pA | Note 3, TA=25°C (±) | 2 | |
| Input Noise Voltage | en | 0.5 | μVP-P | 0.1Hz to 10Hz | 2 | ||
| Input Noise Voltage Density | 17 | 30 | nV/√Hz | fO = 10Hz (Note 4) | 2 | ||
| Input Noise Voltage Density | 14 | 22 | nV/√Hz | fO = 1000Hz (Note 5) | 2 | ||
| Input Noise Current Density | in | 20 | fA/√Hz | fO = 10Hz | 2 | ||
| Large-Signal Voltage Gain | AVOL | 200 | 2000 | V/mV | VOUT = ±12V, RL ≥ 10k | 2 | |
| Large-Signal Voltage Gain | AVOL | 120 | 600 | V/mV | VOUT = ±10V, RL ≥ 2k | 2 | |
| Input Offset Voltage over temp | VOS | 40 | 180 | μV | 0°C ≤ TA ≤ 70°C | 3 | |
| Input Offset Voltage over temp (Note 3) | VOS | 50 | 250 | μV | 0°C ≤ TA ≤ 70°C, Note 3 | 3 | |
| Avg Temp Coefficient of Input Offset Voltage | 0.2 | 1.5 | μV/°C | 0°C ≤ TA ≤ 70°C | 3 | ||
| Input Offset Current over temp | IOS | 40 | 180 | pA | 0°C ≤ TA ≤ 70°C | 3 | |
| Input Offset Current over temp (Note 3) | IOS | 50 | 250 | pA | 0°C ≤ TA ≤ 70°C, Note 3 | 3 | |
| Avg Temp Coefficient of Input Offset Current | 0.4 | 2.5 | pA/°C | 0°C ≤ TA ≤ 70°C | 3 | ||
| Input Bias Current over temp | IB | 40 | 180 | pA | 0°C ≤ TA ≤ 70°C (±) | 3 | |
| Input Bias Current over temp (Note 3) | IB | 50 | 250 | pA | 0°C ≤ TA ≤ 70°C, Note 3 (±) | 3 | |
| Avg Temp Coefficient of Input Bias Current | 0.4 | 2.5 | pA/°C | 0°C ≤ TA ≤ 70°C | 3 | ||
| Large-Signal Voltage Gain over temp | AVOL | 150 | 1500 | V/mV | VOUT = ±12V, RL ≥ 10k, 0°C ≤ TA ≤ 70°C | 3 | |
| Common Mode Rejection Ratio over temp | CMRR | 110 | 130 | dB | VCM = ±13.5V, 0°C ≤ TA ≤ 70°C | 3 | |
| Power Supply Rejection Ratio over temp | PSRR | 110 | 128 | dB | VS = ±2.5V to ±20V, 0°C ≤ TA ≤ 70°C | 3 | |
| Input Voltage Range over temp | 13.5 | V | ±, 0°C ≤ TA ≤ 70°C | 3 | |||
| Output Voltage Swing over temp | VOUT | 13 | 14 | V | RL = 10k, 0°C ≤ TA ≤ 70°C (±) | 3 | |
| Supply Current over temp | IS | 400 | 800 | μA | 0°C ≤ TA ≤ 70°C | 3 | |
| Common Mode Rejection Ratio | CMRR | 114 | 132 | dB | VCM = ±13.5V | 3 | |
| Power Supply Rejection Ratio | PSRR | 114 | 132 | dB | VS = ±2V to ±20V | 3 | |
| Input Voltage Range | 13.5 | 14 | V | ± | 3 | ||
| Output Voltage Swing | VOUT | 13 | 14 | V | RL = 10k (±) | 3 | |
| Slew Rate | 0.1 | 0.2 | V/μs | CF = 30pF | 3 | ||
| Supply Current | IS | 380 | 600 | μA | Note 3 | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | NOTE: LEAD DIMENSIONS APPLY TO SOLDER DIP/PLATE (1.143, 1.651) OR TIN PLATE LEADS | 14 |
CAD (KiCad official)
- Symbol:
LT1008CN8#PBF - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
lt1008cn8-pbf-etched.step/lt1008cn8-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt1008cn8-pbf.step/lt1008cn8-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
7c2356c87b04053c, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT1008CN8#PBF
**Analog Devices** · Low Noise Amplifiers (LNA) - RF · PDIP-8
LT1008CN8#PBF from Analog Devices, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COMP1 | passive | Frequency compensation terminal 1, where the external compensation capacitor (standard circuit uses CF of 30pF minimum with pin 8) is connected; leakage into the compensation terminals can affect offset voltage and drift. |
| 2 | -IN | input | Inverting input; differential input current is limited to ±10mA (differential voltages above 1V drive current through the protection diodes) and input voltage is limited to ±20V. |
| 3 | +IN | input | Noninverting input with picoampere bias current (100pA max at 25°C); input voltage is limited to ±20V and the input range is ±13.5V min at VS = ±15V. |
| 4 | V- | power_in | Negative supply, specified for ±2V to ±18V operation and rated to a maximum supply voltage of ±20V. |
| 5 | NC | unconnected | No internal connection. |
| 6 | OUT | output | Op amp output that swings ±13V min into RL = 10k, can deliver 5mA load current, and has indefinite short-circuit duration. |
| 7 | V+ | power_in | Positive supply, specified for ±2V to ±18V operation and rated to a maximum supply voltage of ±20V. |
| 8 | COMP2 | passive | Frequency compensation terminal 2, where the external compensation capacitor is connected (CF between pins 1 and 8, or CS of 100pF in the alternate circuit). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | PDIP-8 |
| Category | RF & Radio |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | | -20 | | 20 | V | | 2 |
| Differential Input Current | | -10 | | 10 | mA | Note 2 | 2 |
| Input Voltage | | -20 | | 20 | V | | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Lead Temperature | | | | 300 | °C | Soldering, 10 sec | 2 |
| Operating Temperature Range LT1008C | | 0 | | 70 | °C | LT1008C | 2 |
| Maximum Junction Temperature | TJMAX | | | 150 | °C | N8 package | 2 |
| Thermal Resistance Junction-to-Ambient | θJA | | 130 | | °C/W | N8 8-lead PDIP | 2 |
| Input Offset Voltage | VOS | | 30 | 120 | μV | VS=±15V, VCM=0V, TA=25°C | 2 |
| Input Offset Voltage (Note 3) | VOS | | 40 | 180 | μV | Note 3, TA=25°C | 2 |
| Long-Term Input Offset Voltage Stability | | | 0.3 | | μV/Month | | 2 |
| Input Offset Current | IOS | | 30 | 100 | pA | TA=25°C | 2 |
| Input Offset Current (Note 3) | IOS | | 40 | 150 | pA | Note 3, TA=25°C | 2 |
| Input Bias Current | IB | | 30 | 100 | pA | TA=25°C (±) | 2 |
| Input Bias Current (Note 3) | IB | | 40 | 150 | pA | Note 3, TA=25°C (±) | 2 |
| Input Noise Voltage | en | | 0.5 | | μVP-P | 0.1Hz to 10Hz | 2 |
| Input Noise Voltage Density | | | 17 | 30 | nV/√Hz | fO = 10Hz (Note 4) | 2 |
| Input Noise Voltage Density | | | 14 | 22 | nV/√Hz | fO = 1000Hz (Note 5) | 2 |
| Input Noise Current Density | in | | 20 | | fA/√Hz | fO = 10Hz | 2 |
| Large-Signal Voltage Gain | AVOL | 200 | 2000 | | V/mV | VOUT = ±12V, RL ≥ 10k | 2 |
| Large-Signal Voltage Gain | AVOL | 120 | 600 | | V/mV | VOUT = ±10V, RL ≥ 2k | 2 |
| Input Offset Voltage over temp | VOS | | 40 | 180 | μV | 0°C ≤ TA ≤ 70°C | 3 |
| Input Offset Voltage over temp (Note 3) | VOS | | 50 | 250 | μV | 0°C ≤ TA ≤ 70°C, Note 3 | 3 |
| Avg Temp Coefficient of Input Offset Voltage | | | 0.2 | 1.5 | μV/°C | 0°C ≤ TA ≤ 70°C | 3 |
| Input Offset Current over temp | IOS | | 40 | 180 | pA | 0°C ≤ TA ≤ 70°C | 3 |
| Input Offset Current over temp (Note 3) | IOS | | 50 | 250 | pA | 0°C ≤ TA ≤ 70°C, Note 3 | 3 |
| Avg Temp Coefficient of Input Offset Current | | | 0.4 | 2.5 | pA/°C | 0°C ≤ TA ≤ 70°C | 3 |
| Input Bias Current over temp | IB | | 40 | 180 | pA | 0°C ≤ TA ≤ 70°C (±) | 3 |
| Input Bias Current over temp (Note 3) | IB | | 50 | 250 | pA | 0°C ≤ TA ≤ 70°C, Note 3 (±) | 3 |
| Avg Temp Coefficient of Input Bias Current | | | 0.4 | 2.5 | pA/°C | 0°C ≤ TA ≤ 70°C | 3 |
| Large-Signal Voltage Gain over temp | AVOL | 150 | 1500 | | V/mV | VOUT = ±12V, RL ≥ 10k, 0°C ≤ TA ≤ 70°C | 3 |
| Common Mode Rejection Ratio over temp | CMRR | 110 | 130 | | dB | VCM = ±13.5V, 0°C ≤ TA ≤ 70°C | 3 |
| Power Supply Rejection Ratio over temp | PSRR | 110 | 128 | | dB | VS = ±2.5V to ±20V, 0°C ≤ TA ≤ 70°C | 3 |
| Input Voltage Range over temp | | 13.5 | | | V | ±, 0°C ≤ TA ≤ 70°C | 3 |
| Output Voltage Swing over temp | VOUT | 13 | 14 | | V | RL = 10k, 0°C ≤ TA ≤ 70°C (±) | 3 |
| Supply Current over temp | IS | | 400 | 800 | μA | 0°C ≤ TA ≤ 70°C | 3 |
| Common Mode Rejection Ratio | CMRR | 114 | 132 | | dB | VCM = ±13.5V | 3 |
| Power Supply Rejection Ratio | PSRR | 114 | 132 | | dB | VS = ±2V to ±20V | 3 |
| Input Voltage Range | | 13.5 | 14 | | V | ± | 3 |
| Output Voltage Swing | VOUT | 13 | 14 | | V | RL = 10k (±) | 3 |
| Slew Rate | | 0.1 | 0.2 | | V/μs | CF = 30pF | 3 |
| Supply Current | IS | | 380 | 600 | μA | Note 3 | 3 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | NOTE: LEAD DIMENSIONS APPLY TO SOLDER DIP/PLATE (1.143, 1.651) OR TIN PLATE LEADS | 14 |
## CAD (KiCad official)
- Symbol: `LT1008CN8#PBF`
- Footprint: `Package_DIP:DIP-8_W7.62mm`
- 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files: `lt1008cn8-pbf-etched.step` / `lt1008cn8-pbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt1008cn8-pbf.step` / `lt1008cn8-pbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/LT1008.pdf) (16 pp, sha256 `7c2356c87b04053c`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt1008cn8-pbf-datasheet.pdf)