main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lt1008cn8-pbf: viewers · Ray
lt1008cn8-pbf-etched.glb Publish 0.1.0 · Ray
lt1008cn8-pbf-etched.step lt1008cn8-pbf: factory component page (tier=mfr) · Ray
lt1008cn8-pbf-hero.glb lt1008cn8-pbf: hero GLB from the etched model (keeps the MPN mark) · Ray
lt1008cn8-pbf-hero.overlay.json Publish 0.1.0 · Ray
lt1008cn8-pbf.glb Publish 0.1.0 · Ray
lt1008cn8-pbf.kicad_mod Publish 0.1.0 · Ray
lt1008cn8-pbf.kicad_sym Publish 0.1.0 · Ray
lt1008cn8-pbf.lbr Publish 0.1.0 · Ray
lt1008cn8-pbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

LT1008CN8#PBF

Analog Devices · Low Noise Amplifiers (LNA) - RF · PDIP-8

LT1008CN8#PBF from Analog Devices, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 COMP1 passive Frequency compensation terminal 1, where the external compensation capacitor (standard circuit uses CF of 30pF minimum with pin 8) is connected; leakage into the compensation terminals can affect offset voltage and drift.
2 -IN input Inverting input; differential input current is limited to ±10mA (differential voltages above 1V drive current through the protection diodes) and input voltage is limited to ±20V.
3 +IN input Noninverting input with picoampere bias current (100pA max at 25°C); input voltage is limited to ±20V and the input range is ±13.5V min at VS = ±15V.
4 V- power_in Negative supply, specified for ±2V to ±18V operation and rated to a maximum supply voltage of ±20V.
5 NC unconnected No internal connection.
6 OUT output Op amp output that swings ±13V min into RL = 10k, can deliver 5mA load current, and has indefinite short-circuit duration.
7 V+ power_in Positive supply, specified for ±2V to ±18V operation and rated to a maximum supply voltage of ±20V.
8 COMP2 passive Frequency compensation terminal 2, where the external compensation capacitor is connected (CF between pins 1 and 8, or CS of 100pF in the alternate circuit).

Key specifications

Parameter Value
Manufacturer Analog Devices
Package PDIP-8
Category RF & Radio
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage -20 20 V 2
Differential Input Current -10 10 mA Note 2 2
Input Voltage -20 20 V 2
Storage Temperature Range -65 150 °C 2
Lead Temperature 300 °C Soldering, 10 sec 2
Operating Temperature Range LT1008C 0 70 °C LT1008C 2
Maximum Junction Temperature TJMAX 150 °C N8 package 2
Thermal Resistance Junction-to-Ambient θJA 130 °C/W N8 8-lead PDIP 2
Input Offset Voltage VOS 30 120 μV VS=±15V, VCM=0V, TA=25°C 2
Input Offset Voltage (Note 3) VOS 40 180 μV Note 3, TA=25°C 2
Long-Term Input Offset Voltage Stability 0.3 μV/Month 2
Input Offset Current IOS 30 100 pA TA=25°C 2
Input Offset Current (Note 3) IOS 40 150 pA Note 3, TA=25°C 2
Input Bias Current IB 30 100 pA TA=25°C (±) 2
Input Bias Current (Note 3) IB 40 150 pA Note 3, TA=25°C (±) 2
Input Noise Voltage en 0.5 μVP-P 0.1Hz to 10Hz 2
Input Noise Voltage Density 17 30 nV/√Hz fO = 10Hz (Note 4) 2
Input Noise Voltage Density 14 22 nV/√Hz fO = 1000Hz (Note 5) 2
Input Noise Current Density in 20 fA/√Hz fO = 10Hz 2
Large-Signal Voltage Gain AVOL 200 2000 V/mV VOUT = ±12V, RL ≥ 10k 2
Large-Signal Voltage Gain AVOL 120 600 V/mV VOUT = ±10V, RL ≥ 2k 2
Input Offset Voltage over temp VOS 40 180 μV 0°C ≤ TA ≤ 70°C 3
Input Offset Voltage over temp (Note 3) VOS 50 250 μV 0°C ≤ TA ≤ 70°C, Note 3 3
Avg Temp Coefficient of Input Offset Voltage 0.2 1.5 μV/°C 0°C ≤ TA ≤ 70°C 3
Input Offset Current over temp IOS 40 180 pA 0°C ≤ TA ≤ 70°C 3
Input Offset Current over temp (Note 3) IOS 50 250 pA 0°C ≤ TA ≤ 70°C, Note 3 3
Avg Temp Coefficient of Input Offset Current 0.4 2.5 pA/°C 0°C ≤ TA ≤ 70°C 3
Input Bias Current over temp IB 40 180 pA 0°C ≤ TA ≤ 70°C (±) 3
Input Bias Current over temp (Note 3) IB 50 250 pA 0°C ≤ TA ≤ 70°C, Note 3 (±) 3
Avg Temp Coefficient of Input Bias Current 0.4 2.5 pA/°C 0°C ≤ TA ≤ 70°C 3
Large-Signal Voltage Gain over temp AVOL 150 1500 V/mV VOUT = ±12V, RL ≥ 10k, 0°C ≤ TA ≤ 70°C 3
Common Mode Rejection Ratio over temp CMRR 110 130 dB VCM = ±13.5V, 0°C ≤ TA ≤ 70°C 3
Power Supply Rejection Ratio over temp PSRR 110 128 dB VS = ±2.5V to ±20V, 0°C ≤ TA ≤ 70°C 3
Input Voltage Range over temp 13.5 V ±, 0°C ≤ TA ≤ 70°C 3
Output Voltage Swing over temp VOUT 13 14 V RL = 10k, 0°C ≤ TA ≤ 70°C (±) 3
Supply Current over temp IS 400 800 μA 0°C ≤ TA ≤ 70°C 3
Common Mode Rejection Ratio CMRR 114 132 dB VCM = ±13.5V 3
Power Supply Rejection Ratio PSRR 114 132 dB VS = ±2V to ±20V 3
Input Voltage Range 13.5 14 V ± 3
Output Voltage Swing VOUT 13 14 V RL = 10k (±) 3
Slew Rate 0.1 0.2 V/μs CF = 30pF 3
Supply Current IS 380 600 μA Note 3 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin NOTE: LEAD DIMENSIONS APPLY TO SOLDER DIP/PLATE (1.143, 1.651) OR TIN PLATE LEADS 14

CAD (KiCad official)

  • Symbol: LT1008CN8#PBF
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: PDIP-8 (KiCad packages3D, STEP)
  • 3D model files: lt1008cn8-pbf-etched.step / lt1008cn8-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt1008cn8-pbf.step / lt1008cn8-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (16 pp, sha256 7c2356c87b04053c, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF