main
Ray
lsm6dsv16xtr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
8224805
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230
{
"schema_version": 1,
"type": "component",
"slug": "lsm6dsv16xtr",
"title": "LSM6DSV16XTR",
"brief": "STMicroelectronics Attitude Sensor/Gyroscope, LGA-14(2.5x3). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"sensor",
"lsm6dsv16xtr"
],
"component": {
"mpn": "LSM6DSV16XTR",
"manufacturer": "STMicroelectronics",
"package": "LGA-14(2.5x3)",
"pin_count": 14,
"category": "Sensor",
"subcategory": "Attitude Sensor/Gyroscope",
"datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2309061516_STMicroelectronics-LSM6DSV16XTR_C5267406.pdf",
"parts": {
"symbol": "lsm6dsv16xtr.kicad_sym",
"footprint": "lsm6dsv16xtr.kicad_mod",
"model_3d": "lsm6dsv16xtr-etched.glb",
"model_3d_plain": "lsm6dsv16xtr.glb",
"model_3d_step": "lsm6dsv16xtr-etched.step",
"model_3d_step_plain": "lsm6dsv16xtr.step",
"lbr": "lsm6dsv16xtr.lbr"
},
"distributor_links": {},
"pins": [
{
"number": "1",
"name": "SDO/SA0",
"type": "bidirectional",
"description": "SPI 4-wire interface serial data output (SDO) or I2C least-significant bit of the device address (SA0). Function selected by the active serial interface."
},
{
"number": "2",
"name": "SDx/AH1/Qvar1",
"type": "bidirectional",
"description": "Mode 1: analog hub input 1 (AH1) or Qvar electrode 1 when analog hub / Qvar is enabled; tie to Vdd_IO or GND if unused. Mode 2: I2C serial data master (MSDA). Mode 3: auxiliary SPI 3/4-wire serial data input (SDI_Aux) and 3-wire output (SDO_Aux)."
},
{
"number": "3",
"name": "SCx/AH2/Qvar2",
"type": "bidirectional",
"description": "Mode 1: analog hub input 2 (AH2) or Qvar electrode 2 when analog hub / Qvar is enabled; tie to Vdd_IO or GND if unused. Mode 2: I2C serial clock master (MSCL). Mode 3: auxiliary SPI 3/4-wire serial port clock (SPC_Aux)."
},
{
"number": "4",
"name": "INT1",
"type": "output",
"description": "Programmable interrupt 1, available in both I2C and SPI modes. Used for host-side event notification (data-ready, motion, free-fall, wake-up, FSM/MLC output, etc.)."
},
{
"number": "5",
"name": "Vdd_IO",
"type": "power_in",
"description": "Power supply for the digital I/O pins. Extended range 1.08 V to 3.6 V. Recommended 100 nF decoupling capacitor."
},
{
"number": "6",
"name": "GND",
"type": "power_in",
"description": "0 V supply (ground reference). Connect to system ground."
},
{
"number": "7",
"name": "GND",
"type": "power_in",
"description": "0 V supply (ground reference). Connect to system ground."
},
{
"number": "8",
"name": "Vdd",
"type": "power_in",
"description": "Analog supply voltage: 1.71 V to 3.6 V (typ. 1.8 V). Recommended 100 nF decoupling capacitor."
},
{
"number": "9",
"name": "INT2",
"type": "bidirectional",
"description": "Programmable interrupt 2 (INT2) / data enable (DEN). In Mode 2, also functions as I2C master external synchronization signal (MDRDY). Direction depends on the selected function."
},
{
"number": "10",
"name": "OCS_Aux",
"type": "input",
"description": "Mode 1 & 2: connect to Vdd_IO or leave electrically unconnected. Mode 3: enable for the auxiliary SPI 3/4-wire interface (active-low chip select for aux SPI)."
},
{
"number": "11",
"name": "SDO_Aux",
"type": "output",
"description": "Mode 1 & 2: connect to Vdd_IO or leave electrically unconnected. Mode 3: auxiliary SPI 4-wire serial data output (SDO_Aux); leave unconnected when the auxiliary SPI is used in 3-wire mode."
},
{
"number": "12",
"name": "CS",
"type": "input",
"description": "I2C / MIPI I3C / SPI mode selection (active-low chip select). CS = 1: SPI idle mode and I2C / MIPI I3C communication enabled. CS = 0: SPI communication enabled and I2C / MIPI I3C disabled."
},
{
"number": "13",
"name": "SCL",
"type": "input",
"description": "I2C / MIPI I3C serial clock (SCL) or SPI serial port clock (SPC). Shared clock line for the primary serial interface."
},
{
"number": "14",
"name": "SDA",
"type": "bidirectional",
"description": "I2C / MIPI I3C serial data (SDA), SPI serial data input (SDI), or 3-wire SPI serial data output (SDO). Direction depends on the active protocol and transfer phase."
}
],
"provenance": {
"extractor": "ds2sf",
"datasheet": {
"url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2309061516_STMicroelectronics-LSM6DSV16XTR_C5267406.pdf",
"pages": 198,
"sha256": "ec53c0e5952fc0c9",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 14,
"described": 14,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lsm6dsv16xtr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3,
2.5,
0.78
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "a441fc384db400c96db6affec2f9c22a5d76b0729e0f2fc46c53746be60b76ca",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lsm6dsv16xtr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3,
2.5,
0.78
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "0e89d9809d2fa1d3ffa51f12b8a0b500881a3e04008b9217f3e2059477202197",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "STMicroelectronics",
"Package": "LGA-14(2.5x3)",
"Category": "Sensor",
"Pins": "14"
}
},
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"lsm6dsv16xtr"
],
"discovery_pitch": "LSM6DSV16XTR (STMicroelectronics) component page with datasheet-verified CAD.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lsm6dsv16xtr.kicad_sym",
"lsm6dsv16xtr.kicad_mod",
"lsm6dsv16xtr.glb",
"lsm6dsv16xtr.step",
"lsm6dsv16xtr.lbr",
"docs/hero.png",
"docs/lsm6dsv16xtr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lsm6dsv16xtr-etched.step"
],
"visibility": {
"public": true
},
"variants": [
{
"mpn": "LSM6DSV16XTR",
"kind": "packaging"
}
],
"updated_at": "2026-09-28T18:11:39.645Z"
}