main
Ray lsm6dsv16bxtr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 53fbf64
{
  "slug": "lsm6dsv16bxtr",
  "version": "0.1.0",
  "type": "component",
  "description": "STMicroelectronics Accelerometers, LGA-14(2.5x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "sensors",
    "lsm6dsv16bxtr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lsm6dsv16bxtr.kicad_sym",
    "lsm6dsv16bxtr.kicad_mod",
    "lsm6dsv16bxtr.glb",
    "lsm6dsv16bxtr.step",
    "lsm6dsv16bxtr.lbr",
    "docs/hero.png",
    "docs/lsm6dsv16bxtr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "LSM6DSV16BXTR",
    "manufacturer": "STMicroelectronics",
    "package": "LGA-14(2.5x3)",
    "pin_count": 14,
    "category": "Sensors",
    "subcategory": "Accelerometers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590906152630759424",
    "parts": {
      "symbol": "lsm6dsv16bxtr.kicad_sym",
      "footprint": "lsm6dsv16bxtr.kicad_mod",
      "model_3d": "lsm6dsv16bxtr-etched.glb",
      "model_3d_plain": "lsm6dsv16bxtr.glb",
      "model_3d_step": "lsm6dsv16bxtr-etched.step",
      "model_3d_step_plain": "lsm6dsv16bxtr.step",
      "lbr": "lsm6dsv16bxtr.lbr"
    },
    "distributor_links": {
      "lcsc": "C5267394"
    },
    "pins": [
      {
        "number": "1",
        "name": "SDO/SA0",
        "type": "output",
        "description": "SPI 4-wire serial data output (SDO) or I²C device address least significant bit selection (SA0)."
      },
      {
        "number": "2",
        "name": "TDMout",
        "type": "output",
        "description": "TDM audio data output in Mode 2; connect to GND or Vdd_IO when TDM interface is not used in Mode 1."
      },
      {
        "number": "3",
        "name": "BCLK",
        "type": "input",
        "description": "TDM bit clock input in Mode 2; connect to GND or Vdd_IO when TDM interface is not used in Mode 1."
      },
      {
        "number": "4",
        "name": "INT1",
        "type": "output",
        "description": "Programmable interrupt output for sensor events; available in both I²C and SPI modes."
      },
      {
        "number": "5",
        "name": "Vdd_IO",
        "type": "power_in",
        "description": "Power supply for I/O pins (1.08 to 3.6 V); recommend 100 nF filter capacitor."
      },
      {
        "number": "6",
        "name": "AH1/QVAR1",
        "type": "input",
        "description": "Analog hub input 1 or Qvar electrode 1 when enabled; connect to Vdd or GND if analog hub and Qvar are disabled."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Ground supply (0 V)."
      },
      {
        "number": "8",
        "name": "Vdd",
        "type": "power_in",
        "description": "Core power supply (1.71 to 3.6 V); recommend 100 nF filter capacitor."
      },
      {
        "number": "9",
        "name": "AH2/QVAR2",
        "type": "input",
        "description": "Analog hub input 2 or Qvar electrode 2 when enabled; connect to Vdd or GND if analog hub and Qvar are disabled."
      },
      {
        "number": "10",
        "name": "INT2",
        "type": "output",
        "description": "Programmable interrupt 2 output for sensor events; available in both I²C and SPI modes."
      },
      {
        "number": "11",
        "name": "WCLK",
        "type": "input",
        "description": "TDM word clock input in Mode 2; connect to Vdd_IO or leave unconnected when TDM interface is not used in Mode 1."
      },
      {
        "number": "12",
        "name": "CS",
        "type": "input",
        "description": "Communication mode selection: high enables SPI idle mode or I²C/MIPI I3C communication; low enables active SPI mode."
      },
      {
        "number": "13",
        "name": "SCL",
        "type": "bidirectional",
        "description": "I²C/MIPI I3C serial clock (open-drain in I²C) or SPI serial port clock input."
      },
      {
        "number": "14",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I²C/MIPI I3C serial data (open-drain bidirectional), SPI serial data input (SDI) in 4-wire mode, or serial data output (SDO) in 3-wire mode."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 27,
        "cost_usd": 0.2796,
        "at": "2026-09-21T19:54:51"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590906152630759424",
        "pages": 149,
        "sha256": "b68ff3a7d830e1a7",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 14,
        "described": 14,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lsm6dsv16bxtr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.5,
          0.78
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a441fc384db400c96db6affec2f9c22a5d76b0729e0f2fc46c53746be60b76ca",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lsm6dsv16bxtr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.5,
          0.78
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "8bac8e6329a7e524c4a1cd5bf4ceef3375731019e8acc6e071844e04e4e97780",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}