main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ls7366r-ts: viewers · Ray
ls7366r-ts-etched.glb Publish 0.1.0 · Ray
ls7366r-ts-etched.step ls7366r-ts: factory component page (tier=lcsc) · Ray
ls7366r-ts-hero.glb ls7366r-ts: hero GLB from the etched model (keeps the MPN mark) · Ray
ls7366r-ts-hero.overlay.json Publish 0.1.0 · Ray
ls7366r-ts.glb Publish 0.1.0 · Ray
ls7366r-ts.kicad_mod Publish 0.1.0 · Ray
ls7366r-ts.kicad_sym Publish 0.1.0 · Ray
ls7366r-ts.lbr Publish 0.1.0 · Ray
ls7366r-ts.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 14 pins · Ray

LS7366R-TS

LSI/CSI · Counters / Dividers · TSSOP-14

LS7366R-TS from LSI/CSI, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 fCKO output Crystal oscillator output; a crystal connected between fCKO and fCKi generates the basic filter clock used for the A, B and INDEX/ inputs in quadrature count mode.
2 fCKi input Filter clock input that accepts a crystal or an external clock, divided by 2 when MDR0 bit 7 is 1 and by 1 when it is 0, and must satisfy the filter-clock condition relative to the maximum Clock A quadrature frequency fQA; it is not used in non-quadrature mode.
3 VSS power_in Ground reference for the device; all absolute maximum voltage ratings are referenced to VSS.
4 SS/ input Active-low slave select: a high-to-low transition selects the device for serial transfer, and a low-to-high transition ends the transfer and forces MISO to high impedance.
5 SCK input Serial shift clock supplied by the host master that clocks MOSI in on its rising edge and MISO out on its falling edge.
6 MISO tri_state Serial data output shifted out MSB first on the falling edge of SCK; it is high impedance when SS/ is high so multiple slave outputs can be wire-ORed.
7 MOSI input Serial data input from the host processor, shifted in MSB first on the rising edge of SCK.
8 LFLAG/ output Open-drain latched flag output for Carry, Borrow, Compare or Index that switches to logic 0 when active and returns to high impedance only when the status register STR is cleared.
9 DFLAG/ output Push-pull instantaneous flag output that switches low dynamically on Carry, Borrow, Compare and Index conditions.
10 INDEX/ input Programmable index input (load CNTR, reset CNTR, load OTR, or masked out) that is synchronous or asynchronous to A and B according to MDR0, and is always asynchronous in non-quadrature mode.
11 B input Quadrature clock B input from the encoder, filtered and decoded for direction and count; in non-quadrature mode it is the direction input (high enables up count, low enables down count) and is unfiltered.
12 A input Quadrature clock A input from the encoder, filtered and decoded for count clocks; in non-quadrature mode it is the count input and is unfiltered.
13 CNT_EN input Count enable: counting is enabled when high and disabled when low, with an internal pull-up resistor on this input.
14 VDD power_in Positive supply, specified at 3V to 5.5V (VDD - VSS), with an absolute maximum DC supply of 7.0 V.

Key specifications

Parameter Value
Manufacturer LSI/CSI
Package TSSOP-14
Category Logic ICs
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Temperature TA -25 80 oC 4
Storage Temperature TSTG -65 150 oC 4
DC Supply Voltage VDD 7 V All voltages referenced to Vss 4
Supply Voltage VDD 3 5.5 V 5
Supply Current IDD 300 400 450 µA VDD = 3.0V 5
Supply Current IDD 700 800 950 µA VDD = 5.0V 5
fCKi Logic high input voltage VCH 2.3 V VDD = 3.0V 5
fCKi Logic high input voltage VCH 3.7 V VDD = 5.0V 5
fCKi Logic low input voltage VCL 0.7 V VDD = 3.0V 5
fCKi Logic low input voltage VCL 1.3 V VDD = 5.0 5
All other inputs Logic High input voltage VAH 2.1 V VDD = 3.0V 5
All other inputs Logic High input voltage VAH 3.5 V VDD = 5.0V 5
All other inputs Logic Low input voltage VAL 0.5 V VDD = 3.0V 5
All other inputs Logic Low input voltage VAL 1 V VDD = 5.0V 5
CNT_EN Low input current IIEL 3 5 µA VAL = 0.7V, VDD = 3.0V 5
CNT_EN Low input current IIEL 10 15 µA VAL = 1.2V, VDD = 5.0V 5
CNT_EN High input current IIEH 1 3 µA VAH = 1.9V, VDD = 3.0V 5
CNT_EN High input current IIEH 6 9 µA VAH = 3.2V, VDD = 5.0V 5
All other inputs, High or Low input current 0 0 µA 5
LFLAG, DFLAG Sink output current IOFL -1.3 -2 mA VOUT = 0.5V, VDD = 3.0V 5
LFLAG, DFLAG Sink output current IOFL -3.2 -4 mA VOUT = 0.5V, VDD = 5.0V 5
LFLAG Source output current 0 0 mA Open Drain Output 5
DFLAG Source output current IOFH 1 1.8 mA VOUT = 2.5V, VDD = 3.0V 5
DFLAG Source output current IOFH 2.8 3.6 mA VOUT = 4.5V, VDD = 5.0V 5
fCKO Sink output current IOCL -1.3 -2 mA VOUT = 0.5V, VDD = 3.0V 5
fCKO Sink output current IOCL -3.2 -4 mA VOUT = 0.5V, VDD = 5.0V 5
fCKO Source output current IOCH 1.3 2 mA VOUT = 2.5V, VDD = 3.0V 5
fCKO Source output current IOCH 3.2 4 mA VOUT = 4.5V, VDD = 5.0V 5
TXD/MISO Sink output current IOML -1.5 -2.4 mA VOUT = 0.5V, VDD = 3.0V 5
TXD/MISO Sink output current IOML -3.8 -4.8 mA VOUT = 0.5V, VDD = 5.0V 5
TXD/MISO Source output current IOMH 1.5 2.4 mA VOUT = 2.5V, VDD = 3.0V 5
TXD/MISO Source output current IOMH 3.8 4.8 mA VOUT = 4.5V, VDD = 5.0V 5
SCK High Pulse Width tCH 100 ns 5
SCK Low Pulse Width tCL 100 ns 5
SS/ Set Up Time tCSL 100 ns 5
SS/ Hold Time tCSH 100 ns 5
Inter Command SS/ high tCSI 100 ns 5
fCKI High Pulse Width t1 12 ns 5
fCKI Pulse Width t2 12 ns 5
fCKI Frequency fFCK 40 MHz 5
Effective Filter Clock fF Period t3 25 ns t3 = t1+t2, MDR0 <7> = 0 5
Effective Filter Clock fF Period t3 50 ns t3 = 2(t1+t2), MDR0 <7> = 1 5
Effective Filter Clock fF frequency fF 40 MHz fF = 1/ t3 5
Quadrature Separation t4 26 ns t4 > t3 5
Quadrature Clock Pulse Width t5 52 ns t5 2t3 5
Quadrature Clock frequency fQA, fQB 9.6 MHz fQA = fQB < 1/4t3 5
x1 / x2 / x4 Count Clock Pulse Width tQ2 12 ns tQ2 = (t3)/2 5
Index Input Pulse Width tid 32 ns tid > t4 5
Index Set Up Time tis 5 ns 5
Index Hold Time tih 5 ns 5
DFLAG/ output width tfw 26 ns tfw = t4 5
Clock A High Pulse Width t6 12 ns 6
Clock A Low Pulse Width t7 12 ns 6
Direction Input B Set-up Time t8S 12 ns 6
Direction Input B Hold Time t8H 10 ns 6
CNT_EN Set-up Time t9S 12 ns 6
CNT_EN Hold Time t9H 12 ns 6
Clock Frequency (non-Mod-N) fA 40 MHz fA = (1/(t6 + t7)) 6
Clock to DFLAG/ or LFLAG/ delay t10 20 ns 6
DFLAG/ output width t11 12 ns t10 = t7 6

CAD (KiCad official)

  • Symbol: LS7366R-TS
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: ls7366r-ts-etched.step / ls7366r-ts-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ls7366r-ts.step / ls7366r-ts.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: LSI/CSI datasheet (17 pp, sha256 51b1ffc0846b8ad0, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF