component
LRBN25GFER006
Public Made by Adomby adom
NCT Current Sense Resistors/Shunt Resistors, 2512. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLRBN25GFER006
NCT · Current Sense Resistors/Shunt Resistors · 2512
LRBN25GFER006 from NCT, in a 2512. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised resistor; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised resistor; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NCT |
| Package | 2512 |
| Category | Resistors |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resistance tolerance (code G) | R | -2 | 2 | % | Tolerance code G = ±2% per spec table key | 5 | |
| Temperature coefficient of resistance | TCR | -50 | 50 | ppm/°C | Resistance 1mΩ<R≤100mΩ | 5 | |
| Operating temperature range | T | -55 | 170 | °C | 5 | ||
| Maximum rated current (family max) | 54.78 | A | LRBN25 row, resistance range 1mΩ~100mΩ | 5 | |||
| Maximum overload current (family max) | 122.48 | A | LRBN25 row, resistance range 1mΩ~100mΩ | 5 | |||
| Short time overload resistance change | ΔR/R | -0.5 | 0.5 | % | 5 s at X5 rated power (3W), 24 h rest | 10 | |
| Biased humidity resistance change | ΔR/R | -0.5 | 0.5 | % | 85°C, 85%RH, rated current, 90 min ON/30 min OFF, 1000 h | 11 | |
| Temperature cycling resistance change | ΔR/R | -0.5 | 0.5 | % | -55°C to +125°C, 1000 cycles | 11 | |
| Low temperature exposure resistance change | ΔR/R | -0.5 | 0.5 | % | -55°C, 1000 h | 11 | |
| High temperature exposure resistance change | ΔR/R | -1 | 1 | % | 170°C, 1000 h | 11 | |
| Load life resistance change | ΔR/R | -1 | 1 | % | 70°C, rated current, 90 min ON/30 min OFF, 1000 h | 11 | |
| Resistance to solder heat resistance change | ΔR/R | -0.5 | 0.5 | % | 260±5°C solder bath, 10±1 s | 11 | |
| Resistance to solvent resistance change | ΔR/R | -0.5 | 0.5 | % | Isopropanol 20~25°C, 60±5 s | 11 | |
| Solderability electrode coverage | 95 | % | 245±5°C, 3±1 s; new solder area on electrodes | 11 | |||
| Joint strength of solder resistance change | ΔR/R | -0.5 | 0.5 | % | Load applied to centre of bend test board | 12 | |
| Insulation resistance | IR | 100 | MΩ | 100 VDC applied for 1 min, electrodes to protective layer and to substrate | 12 | ||
| Storage temperature | T | 5 | 35 | °C | Sealed storage, shelf life 2 years | 14 | |
| Storage relative humidity | RH | 40 | 75 | % | Sealed storage, shelf life 2 years | 14 |
CAD (KiCad official)
- Symbol:
LRBN25GFER006 - Footprint:
Resistor_SMD:R_2512_6332Metric - 3D model: 2512 (KiCad packages3D, STEP)
- 3D model files:
lrbn25gfer006-etched.step/lrbn25gfer006-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lrbn25gfer006.step/lrbn25gfer006.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NCT datasheet (15 pp, sha256
1c7bbc6a4c0f07fe, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).