main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lr8103b-t25: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lr8103b-t25: viewers · Ray
lr8103b-t25-etched.fit.json lr8103b-t25: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lr8103b-t25-etched.glb lr8103b-t25: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body… · Ray
lr8103b-t25-etched.step lr8103b-t25: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body… · Ray
lr8103b-t25.glb Publish 0.1.0 · Ray
lr8103b-t25.kicad_mod Publish 0.1.0 · Ray
lr8103b-t25.kicad_sym Publish 0.1.0 · Ray
lr8103b-t25.lbr Publish 0.1.0 · Ray
lr8103b-t25.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
page.json lr8103b-t25: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body… · Ray
README.md lr8103b-t25: specified limits as data (metadata.characteristics, 19 rows from the datasheet) · Ray

LR8103B-T25

LR · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L

LR8103B-T25 from LR, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Unregulated supply input, 0 to 6.5V absolute maximum (9V transient). Bypass to GND with at least 1µF ceramic, placed close to the pin; a series ~10Ω resistor is recommended to absorb upstream spikes.
2 GND power_in Device ground reference. All specified voltages are relative to GND. Use a large ground pour for noise immunity and thermal dissipation.
3 CE input Chip-enable input. Drive high (0.7V min, 1.2V max threshold at VIN=2.2V) to enable the regulator; drive to 0V to disable, dropping supply current to the ±1µA shutdown level. Do not leave floating.
4 NC unconnected No internal connection. Leave floating or tie to GND per PCB preference.
5 VOUT power_out Regulated 2.5V output (±1%), up to 300mA. Requires a ≥1µF ceramic output capacitor for stability. Internal short-circuit protection clamps the output current to ~30mA when VOUT is pulled below 0.7V.

Key specifications

Parameter Value
Manufacturer LR
Package SOT-23-5L
Category PMIC
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • LR8103B-T25
  • LR8103A-T25

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
最大输入电源电压 (Maximum input supply voltage) VIN 9 V 4
最大输出电流 (Maximum output current) IOUT 450 mA 4
耗散功率 SOT23-5L (Power dissipation) PD 250 mW SOT23-5L 4
工作温度 (Operating temperature) TOPR -10 85 ℃ 4
存储温度 (Storage temperature) TSTG -40 125 ℃ 4
ESD HBM -2000 2000 V H.B.M POS/NEG 4
最大结温 (Maximum junction temperature) TJ(MAX) 150 °C 6
输入电压 (Input voltage) VIN 6.5 V ISS=1uA 4
输出电压精度 (Output voltage accuracy, feature list) VOUT -1 1 % 1
使能电压 (Enable voltage) VCE 0.7 1.2 V VIN=2.2V, IOUT=1mA 4
线性调整度 (Line regulation) ΔVOUT -30 30 mV VOUT+1V≤VIN≤6.5V, VIN=VCE, IOUT=10mA 4
负载调整度 (Load regulation) ΔVOUT -40 40 mV VIN=VCE=VOUT+1V, 1mA≤IOUT≤100mA 4
停机电流 (Shutdown current) ISHD -1 1 uA VIN=VOUT+1V, VCE=0V 5
静态电流 (Quiescent current) ISS 0.8 1 uA VIN=VCE=VOUT+1V 5
温度系数 (Temperature coefficient) ΔVOUT/(ΔTa*VOUT) -100 100 ppm/℃ VIN=VCE=VOUT+1V, IOUT=10mA, -40℃≤Ta≤85℃ 5
建议最大结温 (Recommended maximum junction temperature) TJ 125 °C normal operation 6
输入电容 (Input capacitor, ceramic) CIN 1 μF ceramic, input pin bypass 6
输出电容 (Output capacitor, ceramic) COUT 1 μF ceramic 6
结到环境热阻 SOT23-5L (Junction-to-ambient thermal resistance) θJA 500 °C/W SOT23-5L 6

CAD (KiCad official)

  • Symbol: LR8103B-T25
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5L (KiCad packages3D, STEP)
  • 3D model files: lr8103b-t25-etched.step / lr8103b-t25-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lr8103b-t25.step / lr8103b-t25.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
lr8103b-t25.step 85 KB You want the bare part, or you mark your own boards.
lr8103b-t25-etched.step 2.2 MB You want the part with LR8103B-T25 already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 535 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: LR datasheet (10 pp, sha256 9a6b1e38d52b38ed, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF