3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownLR8103B-T25
LR · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L
LR8103B-T25 from LR, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Unregulated supply input, 0 to 6.5V absolute maximum (9V transient). Bypass to GND with at least 1µF ceramic, placed close to the pin; a series ~10Ω resistor is recommended to absorb upstream spikes. |
| 2 | GND | power_in | Device ground reference. All specified voltages are relative to GND. Use a large ground pour for noise immunity and thermal dissipation. |
| 3 | CE | input | Chip-enable input. Drive high (0.7V min, 1.2V max threshold at VIN=2.2V) to enable the regulator; drive to 0V to disable, dropping supply current to the ±1µA shutdown level. Do not leave floating. |
| 4 | NC | unconnected | No internal connection. Leave floating or tie to GND per PCB preference. |
| 5 | VOUT | power_out | Regulated 2.5V output (±1%), up to 300mA. Requires a ≥1µF ceramic output capacitor for stability. Internal short-circuit protection clamps the output current to ~30mA when VOUT is pulled below 0.7V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LR |
| Package | SOT-23-5L |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
LR8103B-T25LR8103A-T25
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 最大输入电源电压 (Maximum input supply voltage) | VIN | 9 | V | 4 | |||
| 最大输出电流 (Maximum output current) | IOUT | 450 | mA | 4 | |||
| 耗散功率 SOT23-5L (Power dissipation) | PD | 250 | mW | SOT23-5L | 4 | ||
| 工作温度 (Operating temperature) | TOPR | -10 | 85 | ℃ | 4 | ||
| 存储温度 (Storage temperature) | TSTG | -40 | 125 | ℃ | 4 | ||
| ESD HBM | -2000 | 2000 | V | H.B.M POS/NEG | 4 | ||
| 最大结温 (Maximum junction temperature) | TJ(MAX) | 150 | °C | 6 | |||
| 输入电压 (Input voltage) | VIN | 6.5 | V | ISS=1uA | 4 | ||
| 输出电压精度 (Output voltage accuracy, feature list) | VOUT | -1 | 1 | % | 1 | ||
| 使能电压 (Enable voltage) | VCE | 0.7 | 1.2 | V | VIN=2.2V, IOUT=1mA | 4 | |
| 线性调整度 (Line regulation) | ΔVOUT | -30 | 30 | mV | VOUT+1V≤VIN≤6.5V, VIN=VCE, IOUT=10mA | 4 | |
| 负载调整度 (Load regulation) | ΔVOUT | -40 | 40 | mV | VIN=VCE=VOUT+1V, 1mA≤IOUT≤100mA | 4 | |
| 停机电流 (Shutdown current) | ISHD | -1 | 1 | uA | VIN=VOUT+1V, VCE=0V | 5 | |
| 静态电流 (Quiescent current) | ISS | 0.8 | 1 | uA | VIN=VCE=VOUT+1V | 5 | |
| 温度系数 (Temperature coefficient) | ΔVOUT/(ΔTa*VOUT) | -100 | 100 | ppm/℃ | VIN=VCE=VOUT+1V, IOUT=10mA, -40℃≤Ta≤85℃ | 5 | |
| 建议最大结温 (Recommended maximum junction temperature) | TJ | 125 | °C | normal operation | 6 | ||
| 输入电容 (Input capacitor, ceramic) | CIN | 1 | μF | ceramic, input pin bypass | 6 | ||
| 输出电容 (Output capacitor, ceramic) | COUT | 1 | μF | ceramic | 6 | ||
| 结到环境热阻 SOT23-5L (Junction-to-ambient thermal resistance) | θJA | 500 | °C/W | SOT23-5L | 6 |
CAD (KiCad official)
- Symbol:
LR8103B-T25 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
lr8103b-t25-etched.step/lr8103b-t25-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lr8103b-t25.step/lr8103b-t25.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
lr8103b-t25.step |
85 KB | You want the bare part, or you mark your own boards. |
lr8103b-t25-etched.step |
2.2 MB | You want the part with LR8103B-T25 already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 535 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LR datasheet (10 pp, sha256
9a6b1e38d52b38ed, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).