Made with kicad-footprint-generator 10.0 · KiCad file format 20260206
LQW15AN5N2B80D
Murata Electronics · Power Inductors · 0402
LQW15AN5N2B80D from Murata Electronics, in a 0402. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised inductor or ferrite bead; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised inductor or ferrite bead; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Murata Electronics |
| Package | 0402 |
| Category | Inductors, Coils, Chokes |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Inductance tolerance (code B) | -0.1 | 0.1 | nH | Tolerance code B: ±0.1 nH for nominal 5.2 nH | 3 | ||
| Q (Min.) | Q | 35 | Measuring frequency 250 MHz (applies to 1.3 nH to 43 nH) | 3 | |||
| DC resistance (Max.) | 0.04 | Ω | Measured with digital multimeter | 3 | |||
| Self-resonant frequency (Min.) | 8 | GHz | 3 | ||||
| Rated current | 1770 | mA | Product temperature rise 40°C max; derated vs. operating temperature per footnote *1 | 3 | |||
| Operating temperature range | -55 | 125 | °C | 1 | |||
| Storage temperature range | -55 | 125 | °C | 1 | |||
| Inductance change rate after resistance to soldering heat | -5 | 5 | % | Solder temperature 270°C±5°C, immersion 10 s±1 s | 9 | ||
| Q change rate after resistance to soldering heat | -20 | 20 | % | Not printed separately for soldering heat test | 9 | ||
| Inductance change rate after heat resistance | -5 | 5 | % | 125°C±2°C, 1000 h (+48 h, -0 h) | 10 | ||
| Q change rate after heat resistance | -20 | 20 | % | 125°C±2°C, 1000 h (+48 h, -0 h) | 10 | ||
| Inductance change rate after cold resistance | -5 | 5 | % | -55°C±2°C, 1000 h (+48 h, -0 h) | 10 | ||
| Q change rate after cold resistance | -20 | 20 | % | -55°C±2°C, 1000 h (+48 h, -0 h) | 10 | ||
| Inductance change rate after humidity test | -5 | 5 | % | 70°C±2°C, 90% to 95% RH, 1000 h (+48 h, -0 h) | 10 | ||
| Q change rate after humidity test | -20 | 20 | % | 70°C±2°C, 90% to 95% RH, 1000 h (+48 h, -0 h) | 10 | ||
| Inductance change rate after temperature cycle | -5 | 5 | % | 10 cycles, -55°C to +125°C | 10 | ||
| Q change rate after temperature cycle | -20 | 20 | % | 10 cycles, -55°C to +125°C | 10 | ||
| Recommended storage temperature range | -10 | 40 | °C | Room not subject to rapid temperature/humidity changes | 14 | ||
| Recommended relative humidity for storage | 15 | 85 | %RH | Storage | 14 | ||
| Storage period | 12 | months | Use within 12 months after delivery | 14 | |||
| Cleaning temperature | 60 | °C | Cleaning; if IPA is used, 40°C max | 14 | |||
| Cleaning temperature with IPA | 40 | °C | Isopropyl alcohol (IPA) cleaning | 14 | |||
| Ultrasonic cleaning power | 20 | W/L | Ultrasonic cleaning | 14 | |||
| Ultrasonic cleaning time | 5 | min | Ultrasonic cleaning | 14 | |||
| Ultrasonic cleaning frequency | 28 | 40 | kHz | Ultrasonic cleaning | 14 | ||
| Pre-heating temperature difference between solder and product surface | 150 | °C | Reflow pre-heating | 12 | |||
| Cooling temperature difference after soldering | 100 | °C | Cooling into solvent after soldering | 12 | |||
| Limit profile peak temperature | 260 | °C | Limit soldering profile, 10 s | 12 | |||
| Limit profile time above 230°C | 60 | s | Limit soldering profile, above 230°C | 12 | |||
| Standard profile peak temperature tolerance | -3 | 245 | 3 | °C | Standard reflow profile peak 245°C±3°C | 12 | |
| Nominal inductance | L | 5.2 | nH | Nominal value 5.2 nH (code 5N2) | 3 |
CAD (KiCad official)
- Symbol:
LQW15AN5N2B80D - Footprint:
Inductor_SMD:L_0402_1005Metric - 3D model: 0402 (KiCad packages3D, STEP)
- 3D model files:
lqw15an5n2b80d-etched.step/lqw15an5n2b80d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lqw15an5n2b80d.step/lqw15an5n2b80d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Murata Electronics datasheet (15 pp, sha256
66630cacd167423e, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).