Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LQW15AN5N2B80D

Murata Electronics · Power Inductors · 0402

LQW15AN5N2B80D from Murata Electronics, in a 0402. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1 passive Terminal 1 of an unpolarised inductor or ferrite bead; either orientation.
2 2 passive Terminal 2 of an unpolarised inductor or ferrite bead; either orientation.

Key specifications

Parameter Value
Manufacturer Murata Electronics
Package 0402
Category Inductors, Coils, Chokes
Pins 2

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Inductance tolerance (code B) -0.1 0.1 nH Tolerance code B: ±0.1 nH for nominal 5.2 nH 3
Q (Min.) Q 35 Measuring frequency 250 MHz (applies to 1.3 nH to 43 nH) 3
DC resistance (Max.) 0.04 Ω Measured with digital multimeter 3
Self-resonant frequency (Min.) 8 GHz 3
Rated current 1770 mA Product temperature rise 40°C max; derated vs. operating temperature per footnote *1 3
Operating temperature range -55 125 °C 1
Storage temperature range -55 125 °C 1
Inductance change rate after resistance to soldering heat -5 5 % Solder temperature 270°C±5°C, immersion 10 s±1 s 9
Q change rate after resistance to soldering heat -20 20 % Not printed separately for soldering heat test 9
Inductance change rate after heat resistance -5 5 % 125°C±2°C, 1000 h (+48 h, -0 h) 10
Q change rate after heat resistance -20 20 % 125°C±2°C, 1000 h (+48 h, -0 h) 10
Inductance change rate after cold resistance -5 5 % -55°C±2°C, 1000 h (+48 h, -0 h) 10
Q change rate after cold resistance -20 20 % -55°C±2°C, 1000 h (+48 h, -0 h) 10
Inductance change rate after humidity test -5 5 % 70°C±2°C, 90% to 95% RH, 1000 h (+48 h, -0 h) 10
Q change rate after humidity test -20 20 % 70°C±2°C, 90% to 95% RH, 1000 h (+48 h, -0 h) 10
Inductance change rate after temperature cycle -5 5 % 10 cycles, -55°C to +125°C 10
Q change rate after temperature cycle -20 20 % 10 cycles, -55°C to +125°C 10
Recommended storage temperature range -10 40 °C Room not subject to rapid temperature/humidity changes 14
Recommended relative humidity for storage 15 85 %RH Storage 14
Storage period 12 months Use within 12 months after delivery 14
Cleaning temperature 60 °C Cleaning; if IPA is used, 40°C max 14
Cleaning temperature with IPA 40 °C Isopropyl alcohol (IPA) cleaning 14
Ultrasonic cleaning power 20 W/L Ultrasonic cleaning 14
Ultrasonic cleaning time 5 min Ultrasonic cleaning 14
Ultrasonic cleaning frequency 28 40 kHz Ultrasonic cleaning 14
Pre-heating temperature difference between solder and product surface 150 °C Reflow pre-heating 12
Cooling temperature difference after soldering 100 °C Cooling into solvent after soldering 12
Limit profile peak temperature 260 °C Limit soldering profile, 10 s 12
Limit profile time above 230°C 60 s Limit soldering profile, above 230°C 12
Standard profile peak temperature tolerance -3 245 3 °C Standard reflow profile peak 245°C±3°C 12
Nominal inductance L 5.2 nH Nominal value 5.2 nH (code 5N2) 3

CAD (KiCad official)

  • Symbol: LQW15AN5N2B80D
  • Footprint: Inductor_SMD:L_0402_1005Metric
  • 3D model: 0402 (KiCad packages3D, STEP)
  • 3D model files: lqw15an5n2b80d-etched.step / lqw15an5n2b80d-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lqw15an5n2b80d.step / lqw15an5n2b80d.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Murata Electronics datasheet (15 pp, sha256 66630cacd167423e, retrieved 2026-10-17, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins, primary two-terminal convention (convention), consensus off (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF