by adom
0603 AEC-Q200 Chip Inductor · 10 µH ±20% · 100 mA (ΔL) / 300 mA (temp rise)
master
Assembly animation
A small 3D scene of LQM18DH100M70L on a test board. Static lowers the part onto its pads; Pick & Place shows Adom's pick-and-place nozzle lifting it out of the carrier tape (pocket sizes from the datasheet) and placing it. The board is a thick illustrative slab, not a real stack-up, and the pads in the scene follow this page's footprint.
Open the animation (drag to orbit, scroll to zoom; the buttons switch between Static and Pick & Place).
The scene is docs/assembly.html, which loads LQM18DH100M70L.insertion.glb from this page.
# Assembly animation
A small 3D scene of LQM18DH100M70L on a test board. **Static** lowers the part onto its pads; **Pick & Place** shows Adom's pick-and-place nozzle lifting it out of the carrier tape (pocket sizes from the datasheet) and placing it. The board is a thick illustrative slab, not a real stack-up, and the pads in the scene follow this page's footprint.
[Open the animation](https://wiki.adom.inc/adom/lqm18dh100m70l/render/docs/assembly.html) (drag to orbit, scroll to zoom; the buttons switch between Static and Pick & Place).
The scene is `docs/assembly.html`, which loads `LQM18DH100M70L.insertion.glb` from this page.