main
Ray
Publish 0.1.0
d4565a2
LPC804UKAZ
NXP Semicon · NXP MCU · WLCSP-20(1.8x2.5)
LPC804UKAZ from NXP Semicon, in a WLCSP-20(1.8x2.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| D3 | PIO0_0/ACMP_I1/TDO | bidirectional | General-purpose port 0 pin 0 that can also serve as analog comparator input 1, the TDO boundary-scan output, or the U0_RXD ISP pin on single-supply devices. |
| A4 | PIO0_1/ADC_0/ACMP_I2/TDI/CLKIN | bidirectional | General-purpose port 0 pin 1 that can also serve as ADC input 0, analog comparator input 2, the TDI boundary-scan input, or the external CLKIN clock input (maximum 15 MHz). |
| B2 | SWDIO/PIO0_2/TMS | bidirectional | Serial Wire Debug I/O, enabled by default on this pin, which can alternatively be used as general-purpose port 0 pin 2 or the TMS boundary-scan input. |
| B1 | SWCLK/PIO0_3/TCK | input | Serial Wire Clock input, enabled by default on this pin, which can alternatively be used as general-purpose port 0 pin 3 or the TCK boundary-scan input. |
| C2 | PIO0_4/ADC_11/TRSTN | bidirectional | General-purpose port 0 pin 4 that can also serve as ADC input 11, the TRST boundary-scan input, or the U0_TXD ISP pin on single-supply devices. |
| C1 | RESET/PIO0_5 | input | External reset input where a LOW-going pulse as short as 50 ns resets the device, and the pin can alternatively be used as general-purpose port 0 pin 5 if no external reset is needed. |
| D4 | PIO0_7/ADC_1/ACMPVREF | bidirectional | General-purpose port 0 pin 7 that can also serve as ADC input 1 or the alternate reference voltage for the analog comparator. |
| C3 | PIO0_8/ADC_5 | bidirectional | General-purpose port 0 pin 8 that can also serve as ADC input 5, and is the U0_RXD ISP pin on dual-supply devices. |
| B3 | PIO0_9/ADC_4 | bidirectional | General-purpose port 0 pin 9 that can also serve as ADC input 4, and is the U0_TXD ISP pin on dual-supply devices. |
| A2 | PIO0_10/ADC_7 | bidirectional | General-purpose port 0 pin 10 that can also serve as ADC input 7. |
| A1 | PIO0_11/ADC_6/WKTCLKIN | bidirectional | General-purpose port 0 pin 11 that can also serve as ADC input 6 or an external clock input for the self-wake-up timer. |
| D1 | PIO0_12 | bidirectional | General-purpose port 0 pin 12 that is a high-drive output pin and, when held LOW during reset, starts the ISP command handler. |
| D2 | PIO0_13/ADC_10 | bidirectional | General-purpose port 0 pin 13 that can also serve as ADC input 10. |
| E3 | PIO0_14/ACMP_I3/ADC_2 | bidirectional | General-purpose port 0 pin 14 that can also serve as analog comparator common input 3 or ADC input 2. |
| A3 | PIO0_15/ADC_8 | bidirectional | General-purpose port 0 pin 15 that can also serve as ADC input 8 and is a 5 V tolerant digital I/O. |
| E2 | PIO0_16/ACMP_I4/ADC_3 | bidirectional | General-purpose port 0 pin 16 that can also serve as analog comparator common input 4 or ADC input 3. |
| E1 | PIO0_17/ADC_9 | bidirectional | General-purpose port 0 pin 17 that can also serve as ADC input 9. |
| E4 | VREFP | input | ADC positive reference voltage that must be equal to or lower than VDD. |
| B4 | VDD | power_in | Supply voltage (single supply range 1.71 V to 3.6 V) that also powers the core voltage regulator and all I/Os on this package since no VDDIO ball is present. |
| C4 | VSS | power_in | Ground reference for the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | WLCSP-20(1.8x2.5) |
| Category | Embedded Processors & Controllers |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD supply voltage (core and external rail) | VDD | -0.5 | 4.6 | V | 39 | ||
| Input voltage 5 V tolerant I/O pins | VI | -0.5 | 5.4 | V | VDD >= 1.71 V | 39 | |
| Input voltage 3 V tolerant I/O pin ACMPVREF | VI | -0.5 | 3.6 | V | VDD present or not present | 39 | |
| Storage temperature | Tstg | -65 | 150 | °C | 39 | ||
| Total power dissipation WLCSP20 (JEDEC) | Ptot(pack) | 0.8 | W | JEDEC (4.5 in x 4 in); still air; based on package heat transfer, not device power consumption | 40 | ||
| Electrostatic discharge voltage human body model | Vesd | 2000 | V | human body model; all pins | 40 | ||
| VDD supply voltage (core and external rail) | VDD | 1.71 | 3.6 | V | Tamb = -40 °C to +105 °C | 42 | |
| VDD supply voltage for ADC operations | VDD | 2.5 | 3.6 | V | For ADC operations | 42 | |
| VDD supply voltage for DAC operations | VDD | 2.7 | 3.6 | V | For DAC operations | 42 | |
| I/O rail supply voltage | VDDIO | 1.71 | 3.6 | V | I/O rail | 42 | |
| ADC positive reference voltage | Vref | 2.5 | V | on pin VREFP; maximum printed as VDD | 42 | ||
| Clock frequency internal CPU/system clock | fclk | 15 | MHz | internal CPU/system clock | 42 | ||
| Operating temperature range | Tamb | -40 | 105 | °C | 3 | ||
| Supply current Deep-sleep mode | IDD | 100 | 175 | µA | Deep-sleep mode; VDD = 3.3 V; Tamb = 25 °C | 43 | |
| Supply current Deep-sleep mode | IDD | 240 | µA | Deep-sleep mode; VDD = 3.3 V; Tamb = 105 °C | 43 | ||
| Supply current Power-down mode | IDD | 6 | 14 | µA | Power-down mode; VDD = 3.3 V; Tamb = 25 °C | 43 | |
| Supply current Power-down mode | IDD | 75 | µA | Power-down mode; VDD = 3.3 V; Tamb = 105 °C | 43 | ||
| Supply current Deep power-down mode | IDD | 0.15 | 0.5 | µA | Deep power-down mode; VDD = 3.3 V; Tamb = 25 °C | 43 | |
| Supply current Deep power-down mode | IDD | 7 | µA | Deep power-down mode; VDD = 3.3 V; Tamb = 105 °C | 43 | ||
| LOW-level input current | IIL | 0.5 | 10 | nA | VI = 0 V; on-chip pull-up resistor disabled | 47 | |
| HIGH-level input current | IIH | 0.5 | 10 | nA | VI = VDD; on-chip pull-down resistor disabled | 47 | |
| OFF-state output current | IOZ | 0.5 | 10 | nA | VO = 0 V; VO = VDD; on-chip pull-up/down resistors disabled | 47 | |
| LOW-level output voltage | VOL | 0.5 | V | IOL = 4 mA; 2.5 V <= VDD <= 3.6 V | 47 | ||
| HIGH-level output current | IOH | 4 | mA | VOH = VDD - 0.4 V; 2.5 V <= VDD <= 3.6 V | 47 | ||
| HIGH-level output current | IOH | 3 | mA | VOH = VDD - 0.5 V; 1.71 V <= VDD < 2.5 V | 47 | ||
| LOW-level output current | IOL | 4 | mA | VOL = 0.5 V; 2.5 V <= VDD <= 3.6 V | 47 | ||
| LOW-level output current | IOL | 3 | mA | VOL = 0.5 V; 1.71 V <= VDD < 2.5 V | 47 | ||
| HIGH-level short-circuit output current | IOHS | 45 | mA | VOH = 0 V; allowed as long as current limit not exceeded | 47 | ||
| LOW-level short-circuit output current | IOLS | 50 | mA | VOL = VDD; allowed as long as current limit not exceeded | 47 | ||
| Pull-down current | Ipd | 10 | 50 | 150 | µA | VI = 5 V | 47 |
| Pull-up current | Ipu | 10 | 50 | 90 | µA | VI = 0 V; 2.0 V <= VDD <= 3.6 V | 47 |
| Pull-up current | Ipu | 7 | 50 | 85 | µA | VI = 0 V; 1.71 V <= VDD < 2.0 V | 47 |
| Endurance | Nendu | 200000 | 500000 | cycles | Tamb = -40 °C to +105 °C; based on JEDEC NVM qualification | 52 | |
| Retention time powered | tret | 10 | years | powered | 52 | ||
| Retention time not powered | tret | 20 | years | not powered | 52 | ||
| FRO clock frequency tolerance 9/12/15 MHz | fosc(RC) | -1 | 1 | % | 0 °C <= Tamb <= 70 °C; 1.7 V <= VDD <= 3.6 V | 53 | |
| FRO clock frequency tolerance 9/12/15 MHz | fosc(RC) | -3.5 | 2.5 | % | 40 °C <= Tamb <= 105 °C; 1.7 V <= VDD <= 3.6 V | 53 | |
| LPOsc clock frequency tolerance (1 MHz) | fosc(RC) | -3 | 1 | 3 | % | Tamb = -40 °C to +105 °C; 1.71 V <= VDD <= 3.6 V | 53 |
| Rise time | tr | 3 | 5 | ns | pin configured as output; 3.0 V <= VDD <= 3.6 V | 53 | |
| Fall time | tf | 2.5 | 5 | ns | pin configured as output; 3.0 V <= VDD <= 3.6 V | 53 | |
| WKTCLKIN clock frequency | fclk | 10 | MHz | power-down, deep-sleep, and active mode; 1.71 V <= VDD <= 3.6 V | 54 | ||
| I2C SCL clock frequency Standard-mode | fSCL | 0 | 100 | kHz | Standard-mode | 54 | |
| I2C SCL clock frequency Fast-mode | fSCL | 0 | 400 | kHz | Fast-mode | 54 | |
| SPI master data output valid time | tv(Q) | 0 | 4 | ns | SPI master; 1.71 V <= VDD <= 3.6 V | 56 | |
| SPI slave data output valid time | tv(Q) | 0 | 25 | ns | SPI slave; 3.0 V <= VDD <= 3.6 V | 56 | |
| SPI slave data output valid time | tv(Q) | 0 | 35 | ns | SPI slave; 1.71 V <= VDD < 3.0 V | 56 | |
| USART slave data output valid time | tv(Q) | 0 | 31 | ns | USART slave synchronous mode; 3.0 V <= VDD <= 3.6 V | 59 | |
| USART slave data output valid time | tv(Q) | 0 | 40 | ns | USART slave synchronous mode; 1.71 V <= VDD < 3.0 V | 59 | |
| ADC clock frequency | fclk(ADC) | 15 | MHz | VDD = 2.5 V to 3.6 V | 62 | ||
| ADC sampling frequency | fs | 480 | Ksamples/s | VDD = 2.5 V to 3.6 V | 62 | ||
| ADC input impedance | Zi | 0.1 | MΩ | fs = 480 Ksamples/s | 62 | ||
| ADC analog input capacitance | Cia | 26 | pF | VDD = 2.5 V to 3.6 V | 62 | ||
| Internal voltage reference output voltage | VO | 860 | 940 | mV | Tamb = 25 °C to 105 °C; VDD = 3.3 V | 65 | |
| Comparator reference voltage | Vref(cmp) | 1.5 | 3.6 | V | pin ACMPVREF | 65 | |
| DAC output pin resistance | ROUT | 90 | 200 | Ω | PIO0_19/DACOUT_0 pin resistance | 67 | |
| Thermal resistance junction-to-ambient | Rth(j-a) | 56.5 | C/W | JEDEC (4.5 in x 4 in); still air; ±15 % as printed | 41 | ||
| Thermal resistance junction-to-ambient single-layer | Rth(j-a) | 148 | C/W | single-layer (4.5 in x 3 in); still air; ±15 % as printed | 41 | ||
| Thermal resistance junction-to-case | Rth(j-c) | 0.7 | C/W | ±15 % as printed | 41 |
CAD (KiCad official)
- Symbol:
LPC804UKAZ - Footprint:
Package_CSP:WLCSP-20_1.934x2.434mm_Layout4x5_P0.4mm - 3D model: WLCSP-20(1.8x2.5) (KiCad packages3D, STEP)
- 3D model files:
lpc804ukaz-etched.step/lpc804ukaz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lpc804ukaz.step/lpc804ukaz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (90 pp, sha256
4be3cee5e8ceae1d, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LPC804UKAZ
**NXP Semicon** · NXP MCU · WLCSP-20(1.8x2.5)
LPC804UKAZ from NXP Semicon, in a WLCSP-20(1.8x2.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| D3 | PIO0_0/ACMP_I1/TDO | bidirectional | General-purpose port 0 pin 0 that can also serve as analog comparator input 1, the TDO boundary-scan output, or the U0_RXD ISP pin on single-supply devices. |
| A4 | PIO0_1/ADC_0/ACMP_I2/TDI/CLKIN | bidirectional | General-purpose port 0 pin 1 that can also serve as ADC input 0, analog comparator input 2, the TDI boundary-scan input, or the external CLKIN clock input (maximum 15 MHz). |
| B2 | SWDIO/PIO0_2/TMS | bidirectional | Serial Wire Debug I/O, enabled by default on this pin, which can alternatively be used as general-purpose port 0 pin 2 or the TMS boundary-scan input. |
| B1 | SWCLK/PIO0_3/TCK | input | Serial Wire Clock input, enabled by default on this pin, which can alternatively be used as general-purpose port 0 pin 3 or the TCK boundary-scan input. |
| C2 | PIO0_4/ADC_11/TRSTN | bidirectional | General-purpose port 0 pin 4 that can also serve as ADC input 11, the TRST boundary-scan input, or the U0_TXD ISP pin on single-supply devices. |
| C1 | RESET/PIO0_5 | input | External reset input where a LOW-going pulse as short as 50 ns resets the device, and the pin can alternatively be used as general-purpose port 0 pin 5 if no external reset is needed. |
| D4 | PIO0_7/ADC_1/ACMPVREF | bidirectional | General-purpose port 0 pin 7 that can also serve as ADC input 1 or the alternate reference voltage for the analog comparator. |
| C3 | PIO0_8/ADC_5 | bidirectional | General-purpose port 0 pin 8 that can also serve as ADC input 5, and is the U0_RXD ISP pin on dual-supply devices. |
| B3 | PIO0_9/ADC_4 | bidirectional | General-purpose port 0 pin 9 that can also serve as ADC input 4, and is the U0_TXD ISP pin on dual-supply devices. |
| A2 | PIO0_10/ADC_7 | bidirectional | General-purpose port 0 pin 10 that can also serve as ADC input 7. |
| A1 | PIO0_11/ADC_6/WKTCLKIN | bidirectional | General-purpose port 0 pin 11 that can also serve as ADC input 6 or an external clock input for the self-wake-up timer. |
| D1 | PIO0_12 | bidirectional | General-purpose port 0 pin 12 that is a high-drive output pin and, when held LOW during reset, starts the ISP command handler. |
| D2 | PIO0_13/ADC_10 | bidirectional | General-purpose port 0 pin 13 that can also serve as ADC input 10. |
| E3 | PIO0_14/ACMP_I3/ADC_2 | bidirectional | General-purpose port 0 pin 14 that can also serve as analog comparator common input 3 or ADC input 2. |
| A3 | PIO0_15/ADC_8 | bidirectional | General-purpose port 0 pin 15 that can also serve as ADC input 8 and is a 5 V tolerant digital I/O. |
| E2 | PIO0_16/ACMP_I4/ADC_3 | bidirectional | General-purpose port 0 pin 16 that can also serve as analog comparator common input 4 or ADC input 3. |
| E1 | PIO0_17/ADC_9 | bidirectional | General-purpose port 0 pin 17 that can also serve as ADC input 9. |
| E4 | VREFP | input | ADC positive reference voltage that must be equal to or lower than VDD. |
| B4 | VDD | power_in | Supply voltage (single supply range 1.71 V to 3.6 V) that also powers the core voltage regulator and all I/Os on this package since no VDDIO ball is present. |
| C4 | VSS | power_in | Ground reference for the device. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | WLCSP-20(1.8x2.5) |
| Category | Embedded Processors & Controllers |
| Pins | 20 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD supply voltage (core and external rail) | VDD | -0.5 | | 4.6 | V | | 39 |
| Input voltage 5 V tolerant I/O pins | VI | -0.5 | | 5.4 | V | VDD >= 1.71 V | 39 |
| Input voltage 3 V tolerant I/O pin ACMPVREF | VI | -0.5 | | 3.6 | V | VDD present or not present | 39 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 39 |
| Total power dissipation WLCSP20 (JEDEC) | Ptot(pack) | | | 0.8 | W | JEDEC (4.5 in x 4 in); still air; based on package heat transfer, not device power consumption | 40 |
| Electrostatic discharge voltage human body model | Vesd | | | 2000 | V | human body model; all pins | 40 |
| VDD supply voltage (core and external rail) | VDD | 1.71 | | 3.6 | V | Tamb = -40 °C to +105 °C | 42 |
| VDD supply voltage for ADC operations | VDD | 2.5 | | 3.6 | V | For ADC operations | 42 |
| VDD supply voltage for DAC operations | VDD | 2.7 | | 3.6 | V | For DAC operations | 42 |
| I/O rail supply voltage | VDDIO | 1.71 | | 3.6 | V | I/O rail | 42 |
| ADC positive reference voltage | Vref | 2.5 | | | V | on pin VREFP; maximum printed as VDD | 42 |
| Clock frequency internal CPU/system clock | fclk | | | 15 | MHz | internal CPU/system clock | 42 |
| Operating temperature range | Tamb | -40 | | 105 | °C | | 3 |
| Supply current Deep-sleep mode | IDD | | 100 | 175 | µA | Deep-sleep mode; VDD = 3.3 V; Tamb = 25 °C | 43 |
| Supply current Deep-sleep mode | IDD | | | 240 | µA | Deep-sleep mode; VDD = 3.3 V; Tamb = 105 °C | 43 |
| Supply current Power-down mode | IDD | | 6 | 14 | µA | Power-down mode; VDD = 3.3 V; Tamb = 25 °C | 43 |
| Supply current Power-down mode | IDD | | | 75 | µA | Power-down mode; VDD = 3.3 V; Tamb = 105 °C | 43 |
| Supply current Deep power-down mode | IDD | | 0.15 | 0.5 | µA | Deep power-down mode; VDD = 3.3 V; Tamb = 25 °C | 43 |
| Supply current Deep power-down mode | IDD | | | 7 | µA | Deep power-down mode; VDD = 3.3 V; Tamb = 105 °C | 43 |
| LOW-level input current | IIL | | 0.5 | 10 | nA | VI = 0 V; on-chip pull-up resistor disabled | 47 |
| HIGH-level input current | IIH | | 0.5 | 10 | nA | VI = VDD; on-chip pull-down resistor disabled | 47 |
| OFF-state output current | IOZ | | 0.5 | 10 | nA | VO = 0 V; VO = VDD; on-chip pull-up/down resistors disabled | 47 |
| LOW-level output voltage | VOL | | | 0.5 | V | IOL = 4 mA; 2.5 V <= VDD <= 3.6 V | 47 |
| HIGH-level output current | IOH | 4 | | | mA | VOH = VDD - 0.4 V; 2.5 V <= VDD <= 3.6 V | 47 |
| HIGH-level output current | IOH | 3 | | | mA | VOH = VDD - 0.5 V; 1.71 V <= VDD < 2.5 V | 47 |
| LOW-level output current | IOL | 4 | | | mA | VOL = 0.5 V; 2.5 V <= VDD <= 3.6 V | 47 |
| LOW-level output current | IOL | 3 | | | mA | VOL = 0.5 V; 1.71 V <= VDD < 2.5 V | 47 |
| HIGH-level short-circuit output current | IOHS | | | 45 | mA | VOH = 0 V; allowed as long as current limit not exceeded | 47 |
| LOW-level short-circuit output current | IOLS | | | 50 | mA | VOL = VDD; allowed as long as current limit not exceeded | 47 |
| Pull-down current | Ipd | 10 | 50 | 150 | µA | VI = 5 V | 47 |
| Pull-up current | Ipu | 10 | 50 | 90 | µA | VI = 0 V; 2.0 V <= VDD <= 3.6 V | 47 |
| Pull-up current | Ipu | 7 | 50 | 85 | µA | VI = 0 V; 1.71 V <= VDD < 2.0 V | 47 |
| Endurance | Nendu | 200000 | 500000 | | cycles | Tamb = -40 °C to +105 °C; based on JEDEC NVM qualification | 52 |
| Retention time powered | tret | 10 | | | years | powered | 52 |
| Retention time not powered | tret | 20 | | | years | not powered | 52 |
| FRO clock frequency tolerance 9/12/15 MHz | fosc(RC) | -1 | | 1 | % | 0 °C <= Tamb <= 70 °C; 1.7 V <= VDD <= 3.6 V | 53 |
| FRO clock frequency tolerance 9/12/15 MHz | fosc(RC) | -3.5 | | 2.5 | % | 40 °C <= Tamb <= 105 °C; 1.7 V <= VDD <= 3.6 V | 53 |
| LPOsc clock frequency tolerance (1 MHz) | fosc(RC) | -3 | 1 | 3 | % | Tamb = -40 °C to +105 °C; 1.71 V <= VDD <= 3.6 V | 53 |
| Rise time | tr | 3 | | 5 | ns | pin configured as output; 3.0 V <= VDD <= 3.6 V | 53 |
| Fall time | tf | 2.5 | | 5 | ns | pin configured as output; 3.0 V <= VDD <= 3.6 V | 53 |
| WKTCLKIN clock frequency | fclk | | | 10 | MHz | power-down, deep-sleep, and active mode; 1.71 V <= VDD <= 3.6 V | 54 |
| I2C SCL clock frequency Standard-mode | fSCL | 0 | | 100 | kHz | Standard-mode | 54 |
| I2C SCL clock frequency Fast-mode | fSCL | 0 | | 400 | kHz | Fast-mode | 54 |
| SPI master data output valid time | tv(Q) | 0 | | 4 | ns | SPI master; 1.71 V <= VDD <= 3.6 V | 56 |
| SPI slave data output valid time | tv(Q) | 0 | | 25 | ns | SPI slave; 3.0 V <= VDD <= 3.6 V | 56 |
| SPI slave data output valid time | tv(Q) | 0 | | 35 | ns | SPI slave; 1.71 V <= VDD < 3.0 V | 56 |
| USART slave data output valid time | tv(Q) | 0 | | 31 | ns | USART slave synchronous mode; 3.0 V <= VDD <= 3.6 V | 59 |
| USART slave data output valid time | tv(Q) | 0 | | 40 | ns | USART slave synchronous mode; 1.71 V <= VDD < 3.0 V | 59 |
| ADC clock frequency | fclk(ADC) | | | 15 | MHz | VDD = 2.5 V to 3.6 V | 62 |
| ADC sampling frequency | fs | | | 480 | Ksamples/s | VDD = 2.5 V to 3.6 V | 62 |
| ADC input impedance | Zi | 0.1 | | | MΩ | fs = 480 Ksamples/s | 62 |
| ADC analog input capacitance | Cia | | | 26 | pF | VDD = 2.5 V to 3.6 V | 62 |
| Internal voltage reference output voltage | VO | 860 | | 940 | mV | Tamb = 25 °C to 105 °C; VDD = 3.3 V | 65 |
| Comparator reference voltage | Vref(cmp) | 1.5 | | 3.6 | V | pin ACMPVREF | 65 |
| DAC output pin resistance | ROUT | | 90 | 200 | Ω | PIO0_19/DACOUT_0 pin resistance | 67 |
| Thermal resistance junction-to-ambient | Rth(j-a) | | 56.5 | | C/W | JEDEC (4.5 in x 4 in); still air; ±15 % as printed | 41 |
| Thermal resistance junction-to-ambient single-layer | Rth(j-a) | | 148 | | C/W | single-layer (4.5 in x 3 in); still air; ±15 % as printed | 41 |
| Thermal resistance junction-to-case | Rth(j-c) | | 0.7 | | C/W | ±15 % as printed | 41 |
## CAD (KiCad official)
- Symbol: `LPC804UKAZ`
- Footprint: `Package_CSP:WLCSP-20_1.934x2.434mm_Layout4x5_P0.4mm`
- 3D model: WLCSP-20(1.8x2.5) (KiCad packages3D, STEP)
- 3D model files: `lpc804ukaz-etched.step` / `lpc804ukaz-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lpc804ukaz.step` / `lpc804ukaz.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [NXP Semicon datasheet](https://www.nxp.com/docs/en/data-sheet/LPC804UKAZ.pdf) (90 pp, sha256 `4be3cee5e8ceae1d`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lpc804ukaz-datasheet.pdf)