main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lpc804ukaz: symbol repaired (body fitted to the names) · Ray
lpc804ukaz-etched.glb Publish 0.1.0 · Ray
lpc804ukaz-etched.step lpc804ukaz: factory component page (tier=mfr) · Ray
lpc804ukaz-hero.glb lpc804ukaz: hero GLB from the etched model (keeps the MPN mark) · Ray
lpc804ukaz-hero.overlay.json Publish 0.1.0 · Ray
lpc804ukaz.glb Publish 0.1.0 · Ray
lpc804ukaz.kicad_mod Publish 0.1.0 · Ray
lpc804ukaz.kicad_sym lpc804ukaz: symbol repaired (body fitted to the names) · Ray
lpc804ukaz.lbr lpc804ukaz: symbol repaired (body fitted to the names) · Ray
lpc804ukaz.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 20 pins · Ray

LPC804UKAZ

NXP Semicon · NXP MCU · WLCSP-20(1.8x2.5)

LPC804UKAZ from NXP Semicon, in a WLCSP-20(1.8x2.5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
D3 PIO0_0/ACMP_I1/TDO bidirectional General-purpose port 0 pin 0 that can also serve as analog comparator input 1, the TDO boundary-scan output, or the U0_RXD ISP pin on single-supply devices.
A4 PIO0_1/ADC_0/ACMP_I2/TDI/CLKIN bidirectional General-purpose port 0 pin 1 that can also serve as ADC input 0, analog comparator input 2, the TDI boundary-scan input, or the external CLKIN clock input (maximum 15 MHz).
B2 SWDIO/PIO0_2/TMS bidirectional Serial Wire Debug I/O, enabled by default on this pin, which can alternatively be used as general-purpose port 0 pin 2 or the TMS boundary-scan input.
B1 SWCLK/PIO0_3/TCK input Serial Wire Clock input, enabled by default on this pin, which can alternatively be used as general-purpose port 0 pin 3 or the TCK boundary-scan input.
C2 PIO0_4/ADC_11/TRSTN bidirectional General-purpose port 0 pin 4 that can also serve as ADC input 11, the TRST boundary-scan input, or the U0_TXD ISP pin on single-supply devices.
C1 RESET/PIO0_5 input External reset input where a LOW-going pulse as short as 50 ns resets the device, and the pin can alternatively be used as general-purpose port 0 pin 5 if no external reset is needed.
D4 PIO0_7/ADC_1/ACMPVREF bidirectional General-purpose port 0 pin 7 that can also serve as ADC input 1 or the alternate reference voltage for the analog comparator.
C3 PIO0_8/ADC_5 bidirectional General-purpose port 0 pin 8 that can also serve as ADC input 5, and is the U0_RXD ISP pin on dual-supply devices.
B3 PIO0_9/ADC_4 bidirectional General-purpose port 0 pin 9 that can also serve as ADC input 4, and is the U0_TXD ISP pin on dual-supply devices.
A2 PIO0_10/ADC_7 bidirectional General-purpose port 0 pin 10 that can also serve as ADC input 7.
A1 PIO0_11/ADC_6/WKTCLKIN bidirectional General-purpose port 0 pin 11 that can also serve as ADC input 6 or an external clock input for the self-wake-up timer.
D1 PIO0_12 bidirectional General-purpose port 0 pin 12 that is a high-drive output pin and, when held LOW during reset, starts the ISP command handler.
D2 PIO0_13/ADC_10 bidirectional General-purpose port 0 pin 13 that can also serve as ADC input 10.
E3 PIO0_14/ACMP_I3/ADC_2 bidirectional General-purpose port 0 pin 14 that can also serve as analog comparator common input 3 or ADC input 2.
A3 PIO0_15/ADC_8 bidirectional General-purpose port 0 pin 15 that can also serve as ADC input 8 and is a 5 V tolerant digital I/O.
E2 PIO0_16/ACMP_I4/ADC_3 bidirectional General-purpose port 0 pin 16 that can also serve as analog comparator common input 4 or ADC input 3.
E1 PIO0_17/ADC_9 bidirectional General-purpose port 0 pin 17 that can also serve as ADC input 9.
E4 VREFP input ADC positive reference voltage that must be equal to or lower than VDD.
B4 VDD power_in Supply voltage (single supply range 1.71 V to 3.6 V) that also powers the core voltage regulator and all I/Os on this package since no VDDIO ball is present.
C4 VSS power_in Ground reference for the device.

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package WLCSP-20(1.8x2.5)
Category Embedded Processors & Controllers
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD supply voltage (core and external rail) VDD -0.5 4.6 V 39
Input voltage 5 V tolerant I/O pins VI -0.5 5.4 V VDD >= 1.71 V 39
Input voltage 3 V tolerant I/O pin ACMPVREF VI -0.5 3.6 V VDD present or not present 39
Storage temperature Tstg -65 150 °C 39
Total power dissipation WLCSP20 (JEDEC) Ptot(pack) 0.8 W JEDEC (4.5 in x 4 in); still air; based on package heat transfer, not device power consumption 40
Electrostatic discharge voltage human body model Vesd 2000 V human body model; all pins 40
VDD supply voltage (core and external rail) VDD 1.71 3.6 V Tamb = -40 °C to +105 °C 42
VDD supply voltage for ADC operations VDD 2.5 3.6 V For ADC operations 42
VDD supply voltage for DAC operations VDD 2.7 3.6 V For DAC operations 42
I/O rail supply voltage VDDIO 1.71 3.6 V I/O rail 42
ADC positive reference voltage Vref 2.5 V on pin VREFP; maximum printed as VDD 42
Clock frequency internal CPU/system clock fclk 15 MHz internal CPU/system clock 42
Operating temperature range Tamb -40 105 °C 3
Supply current Deep-sleep mode IDD 100 175 µA Deep-sleep mode; VDD = 3.3 V; Tamb = 25 °C 43
Supply current Deep-sleep mode IDD 240 µA Deep-sleep mode; VDD = 3.3 V; Tamb = 105 °C 43
Supply current Power-down mode IDD 6 14 µA Power-down mode; VDD = 3.3 V; Tamb = 25 °C 43
Supply current Power-down mode IDD 75 µA Power-down mode; VDD = 3.3 V; Tamb = 105 °C 43
Supply current Deep power-down mode IDD 0.15 0.5 µA Deep power-down mode; VDD = 3.3 V; Tamb = 25 °C 43
Supply current Deep power-down mode IDD 7 µA Deep power-down mode; VDD = 3.3 V; Tamb = 105 °C 43
LOW-level input current IIL 0.5 10 nA VI = 0 V; on-chip pull-up resistor disabled 47
HIGH-level input current IIH 0.5 10 nA VI = VDD; on-chip pull-down resistor disabled 47
OFF-state output current IOZ 0.5 10 nA VO = 0 V; VO = VDD; on-chip pull-up/down resistors disabled 47
LOW-level output voltage VOL 0.5 V IOL = 4 mA; 2.5 V <= VDD <= 3.6 V 47
HIGH-level output current IOH 4 mA VOH = VDD - 0.4 V; 2.5 V <= VDD <= 3.6 V 47
HIGH-level output current IOH 3 mA VOH = VDD - 0.5 V; 1.71 V <= VDD < 2.5 V 47
LOW-level output current IOL 4 mA VOL = 0.5 V; 2.5 V <= VDD <= 3.6 V 47
LOW-level output current IOL 3 mA VOL = 0.5 V; 1.71 V <= VDD < 2.5 V 47
HIGH-level short-circuit output current IOHS 45 mA VOH = 0 V; allowed as long as current limit not exceeded 47
LOW-level short-circuit output current IOLS 50 mA VOL = VDD; allowed as long as current limit not exceeded 47
Pull-down current Ipd 10 50 150 µA VI = 5 V 47
Pull-up current Ipu 10 50 90 µA VI = 0 V; 2.0 V <= VDD <= 3.6 V 47
Pull-up current Ipu 7 50 85 µA VI = 0 V; 1.71 V <= VDD < 2.0 V 47
Endurance Nendu 200000 500000 cycles Tamb = -40 °C to +105 °C; based on JEDEC NVM qualification 52
Retention time powered tret 10 years powered 52
Retention time not powered tret 20 years not powered 52
FRO clock frequency tolerance 9/12/15 MHz fosc(RC) -1 1 % 0 °C <= Tamb <= 70 °C; 1.7 V <= VDD <= 3.6 V 53
FRO clock frequency tolerance 9/12/15 MHz fosc(RC) -3.5 2.5 % 40 °C <= Tamb <= 105 °C; 1.7 V <= VDD <= 3.6 V 53
LPOsc clock frequency tolerance (1 MHz) fosc(RC) -3 1 3 % Tamb = -40 °C to +105 °C; 1.71 V <= VDD <= 3.6 V 53
Rise time tr 3 5 ns pin configured as output; 3.0 V <= VDD <= 3.6 V 53
Fall time tf 2.5 5 ns pin configured as output; 3.0 V <= VDD <= 3.6 V 53
WKTCLKIN clock frequency fclk 10 MHz power-down, deep-sleep, and active mode; 1.71 V <= VDD <= 3.6 V 54
I2C SCL clock frequency Standard-mode fSCL 0 100 kHz Standard-mode 54
I2C SCL clock frequency Fast-mode fSCL 0 400 kHz Fast-mode 54
SPI master data output valid time tv(Q) 0 4 ns SPI master; 1.71 V <= VDD <= 3.6 V 56
SPI slave data output valid time tv(Q) 0 25 ns SPI slave; 3.0 V <= VDD <= 3.6 V 56
SPI slave data output valid time tv(Q) 0 35 ns SPI slave; 1.71 V <= VDD < 3.0 V 56
USART slave data output valid time tv(Q) 0 31 ns USART slave synchronous mode; 3.0 V <= VDD <= 3.6 V 59
USART slave data output valid time tv(Q) 0 40 ns USART slave synchronous mode; 1.71 V <= VDD < 3.0 V 59
ADC clock frequency fclk(ADC) 15 MHz VDD = 2.5 V to 3.6 V 62
ADC sampling frequency fs 480 Ksamples/s VDD = 2.5 V to 3.6 V 62
ADC input impedance Zi 0.1 MΩ fs = 480 Ksamples/s 62
ADC analog input capacitance Cia 26 pF VDD = 2.5 V to 3.6 V 62
Internal voltage reference output voltage VO 860 940 mV Tamb = 25 °C to 105 °C; VDD = 3.3 V 65
Comparator reference voltage Vref(cmp) 1.5 3.6 V pin ACMPVREF 65
DAC output pin resistance ROUT 90 200 Ω PIO0_19/DACOUT_0 pin resistance 67
Thermal resistance junction-to-ambient Rth(j-a) 56.5 C/W JEDEC (4.5 in x 4 in); still air; ±15 % as printed 41
Thermal resistance junction-to-ambient single-layer Rth(j-a) 148 C/W single-layer (4.5 in x 3 in); still air; ±15 % as printed 41
Thermal resistance junction-to-case Rth(j-c) 0.7 C/W ±15 % as printed 41

CAD (KiCad official)

  • Symbol: LPC804UKAZ
  • Footprint: Package_CSP:WLCSP-20_1.934x2.434mm_Layout4x5_P0.4mm
  • 3D model: WLCSP-20(1.8x2.5) (KiCad packages3D, STEP)
  • 3D model files: lpc804ukaz-etched.step / lpc804ukaz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lpc804ukaz.step / lpc804ukaz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (90 pp, sha256 4be3cee5e8ceae1d, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF