main
Ray Publish 0.1.0 5ccedb7

LPC804M101JDH20FP

NXP Semicon · NXP MCU · TSSOP-20

LPC804M101JDH20FP from NXP Semicon, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 PIO0_16/ADC_3/ACMP_I4 bidirectional General-purpose port 0 I/O 16, also ADC input 3 and analog comparator common input 4; the pin is 5 V tolerant with configurable hysteresis and analog input, and when used as analog input its digital section is disabled and it is not 5 V tolerant.
2 PIO0_17/ADC_9 bidirectional General-purpose port 0 I/O 17, also ADC input 9; the pin is 5 V tolerant with configurable hysteresis and analog input, and when used as analog input its digital section is disabled and it is not 5 V tolerant.
3 PIO0_13/ADC_10 bidirectional General-purpose port 0 I/O 13, also ADC input 10; the pin is 5 V tolerant with configurable pull-up/pull-down, hysteresis and high-current output driver options as a digital I/O, and when used as analog input it is not 5 V tolerant.
4 PIO0_12 bidirectional General-purpose port 0 I/O 12 and ISP entry pin, where a LOW level during reset starts the ISP command handler; it is a high-drive output pin and is 5 V tolerant with configurable pull-up/pull-down resistors.
5 RESET/PIO0_5 input External reset input where a LOW-going pulse as short as 50 ns resets the device, with a 20 ns glitch filter active in all power modes; the pin can alternatively be used as GPIO PIO0_5 or for a movable function if no external reset is needed.
6 PIO0_4/ADC_11/TRSTN bidirectional General-purpose port 0 I/O 4, also ADC input 11 and boundary-scan TRST (Test Reset) in boundary scan mode; in ISP mode it is the U0_TXD pin for single supply devices, and the pin is 5 V tolerant.
7 SWCLK/PIO0_3/TCK input Serial Wire Clock input, enabled by default on this pin, which is also TCK (Test Clock) in boundary scan mode and general-purpose port 0 I/O 3 when not used for SWD; the pin is 5 V tolerant.
8 SWDIO/PIO0_2/TMS bidirectional Serial Wire Debug I/O, enabled by default on this pin and also TMS (Test Mode Select) in boundary scan mode or general-purpose port 0 I/O 2; the pin is a high-drive output pin and is 5 V tolerant with configurable pull-up/pull-down resistors.
9 PIO0_11/ADC_6/WKTCLKIN bidirectional General-purpose port 0 I/O 11, also ADC input 6 and an external clock input for the self-wake-up timer (WKTCLKIN) that is active in sleep, deep-sleep and power-down modes when selected in the wake-up timer CTRL register; the pin is a WAKEUP pin.
10 PIO0_10/ADC_7 bidirectional General-purpose port 0 I/O 10 and ADC input 7; the pin is a WAKEUP pin for deep power-down wake-up and is 5 V tolerant with configurable pull-up/pull-down resistors.
11 PIO0_15/ADC_8 bidirectional General-purpose port 0 I/O 15 and ADC input 8; the pin is 5 V tolerant with configurable pull-up/pull-down resistors and hysteresis.
12 PIO0_1/ADC_0/ACMP_I2/TDI/CLKIN bidirectional General-purpose port 0 I/O 1, also ADC input 0, analog comparator input 2, external clock input CLKIN, and boundary-scan TDI (Test Data In) in boundary scan mode; the pin is 5 V tolerant with configurable hysteresis and analog input.
13 PIO0_9/ADC_4 bidirectional General-purpose port 0 I/O 9 and ADC input 4; in ISP mode it is the U0_TXD pin for dual supply devices, and the pin is 5 V tolerant with configurable hysteresis and analog input.
14 PIO0_8/ADC_5 bidirectional General-purpose port 0 I/O 8 and ADC input 5; in ISP mode it is the U0_RXD pin for dual supply devices, and the pin is a WAKEUP pin that is 5 V tolerant with configurable hysteresis and analog input.
15 VDD power_in Supply voltage; if VDDIO is not present, VDD supplies the core voltage regulator and the I/Os on both sides of the package.
16 VSS power_in Ground reference for the device.
17 PIO0_7/ADC_1/ACMPVREF bidirectional General-purpose port 0 I/O 7, also ADC input 1 and alternate reference voltage ACMPVREF for the analog comparator; the pin is 5 V tolerant with configurable hysteresis and analog input.
18 VREFP power_in ADC positive reference voltage that must be equal to or lower than VDD.
19 PIO0_0/ACMP_I1/TDO bidirectional General-purpose port 0 I/O 0, also analog comparator input 1 and boundary-scan TDO (Test Data Out) in boundary scan mode; in ISP mode it is the U0_RXD pin for single supply devices, and the pin is 5 V tolerant with configurable hysteresis and analog input.
20 PIO0_14/ADC_2/ACMP_I3 bidirectional General-purpose port 0 I/O 14, also analog comparator common input 3 and ADC input 2; the pin is 5 V tolerant with configurable hysteresis and analog input.

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package TSSOP-20
Category Embedded Processors & Controllers
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
supply voltage (core and external rail) VDD -0.5 4.6 V 39
reference voltage on pin VREFP Vref -0.5 V 39
input voltage, 5 V tolerant I/O pins VI -0.5 5.4 V 5 V tolerant I/O pins; VDD 1.71 V 39
input voltage, 3 V tolerant I/O pin ACMPVREF VI -0.5 3.6 V 3 V tolerant I/O pin ACMPVREF 39
analog input voltage on digital pins configured for an analog function VIA -0.5 4.6 V 39
supply current per supply pin (TSSOP20) IDD 18 mA per supply pin (TSSOP20) 39
ground current per ground pin (TSSOP20) ISS 40 mA per ground pin (TSSOP20) 39
storage temperature Tstg -65 150 °C 39
maximum junction temperature Tj(max) 150 °C 39
total power dissipation (per package), TSSOP20 Ptot(pack) 0.36 W TSSOP20, based on package heat transfer, not device power consumption; JEDEC (4.5 in x 4 in); still air 39
electrostatic discharge voltage, human body model, all pins Vesd 2000 V human body model; all pins 40
clock frequency, internal CPU/system clock fclk 15 MHz internal CPU/system clock 42
supply voltage (core and external rail) VDD 1.71 3.6 V 42
supply voltage for ADC operations VDD 2.5 3.6 V For ADC operations 42
supply voltage for DAC operations VDD 2.7 3.6 V For DAC operations 42
ADC positive reference voltage Vref 2.5 V on pin VREFP 42
input/output capacitance, pins with analog and digital functions Cio 7.1 pF pins with analog and digital functions 42
input/output capacitance, pins with digital functions only Cio 2.8 pF pins with digital functions only 42
supply current, deep-sleep mode IDD 100 175 µA Deep-sleep mode; VDD = 3.3 V; Tamb = 25 C 43
supply current, deep-sleep mode IDD 240 µA Deep-sleep mode; VDD = 3.3 V; Tamb = 105 C 43
supply current, power-down mode IDD 6 14 µA Power-down mode; VDD = 3.3 V; Tamb = 25 C 43
supply current, power-down mode IDD 75 µA Power-down mode; VDD = 3.3 V; Tamb = 105 C 43
supply current, deep power-down mode IDD 0.15 0.5 µA Deep power-down mode; VDD = 3.3 V; Tamb = 25 C 43
supply current, deep power-down mode IDD 7 µA Deep power-down mode; VDD = 3.3 V; Tamb = 105 C 43
LOW-level input current IIL 0.5 10 nA VI = 0 V; on-chip pull-up resistor disabled 47
HIGH-level input current IIH 0.5 10 nA VI = VDD; on-chip pull-down resistor disabled 47
OFF-state output current IOZ 0.5 10 nA VO = 0 V; VO = VDD; on-chip pull-up/down resistors disabled 47
input voltage, 5 V tolerant pins except PIO0_7 VI 0 5.4 V VDD 1.71 V; 5 V tolerant pins except PIO0_7 47
input voltage, VDD = 0 V VI 0 3.6 V VDD = 0 V 47
LOW-level output voltage VOL 0.5 V IOL = 4 mA; 2.5 V <= VDD <= 3.6 V 47
HIGH-level output current IOH 4 mA VOH = VDD - 0.4 V; 2.5 V <= VDD <= 3.6 V 47
HIGH-level output current IOH 3 mA VOH = VDD - 0.5 V; 1.71 V <= VDD < 2.5 V 47
LOW-level output current IOL 4 mA VOL = 0.5 V; 2.5 V <= VDD <= 3.6 V 47
LOW-level output current IOL 3 mA VOL = 0.5 V; 1.71 V <= VDD < 2.5 V 47
HIGH-level short-circuit output current IOHS 45 mA VOH = 0 V 47
LOW-level short-circuit output current IOLS 50 mA VOL = VDD 47
pull-down current Ipd 10 50 150 µA VI = 5 V 47
pull-up current Ipu 10 50 90 µA VI = 0 V; 2.0 V <= VDD <= 3.6 V 47
pull-up current Ipu 7 50 85 µA VI = 0 V; 1.71 V <= VDD < 2.0 V 47
pull-up current Ipu 0 0 0 µA VDD < VI < 5 V 47
endurance Nendu 200000 500000 cycles 52
retention time, powered tret 10 years powered 52
retention time, not powered tret 20 years not powered 52
FRO clock frequency tolerance, 9 MHz fosc(RC) -1 1 % 0 C <= Tamb <= 70 C 53
FRO clock frequency tolerance, 12 MHz fosc(RC) -1 1 % 0 C <= Tamb <= 70 C 53
FRO clock frequency tolerance, 15 MHz fosc(RC) -1 1 % 0 C <= Tamb <= 70 C 53
FRO clock frequency tolerance, 9 MHz fosc(RC) -2 1 % 20 C <= Tamb <= 70 C 53
FRO clock frequency tolerance, 12 MHz fosc(RC) -2 1 % 20 C <= Tamb <= 70 C 53
FRO clock frequency tolerance, 15 MHz fosc(RC) -2 1 % 20 C <= Tamb <= 70 C 53
FRO clock frequency tolerance, 9 MHz fosc(RC) -2 2 % Tamb <= 85 C (lower bound not legible in extracted text) 53
FRO clock frequency tolerance, 12 MHz fosc(RC) -2 2 % Tamb <= 85 C (lower bound not legible in extracted text) 53
FRO clock frequency tolerance, 15 MHz fosc(RC) -2 2 % Tamb <= 85 C (lower bound not legible in extracted text) 53
FRO clock frequency tolerance, 9 MHz fosc(RC) -3.5 2.5 % -40 C <= Tamb <= 105 C 53
FRO clock frequency tolerance, 12 MHz fosc(RC) -3.5 2.5 % -40 C <= Tamb <= 105 C 53
FRO clock frequency tolerance, 15 MHz fosc(RC) -3.5 2.5 % -40 C <= Tamb <= 105 C 53
LPOsc clock frequency tolerance, 1 MHz fosc(RC) -3 3 % 53
thermal resistance, junction-to-ambient, TSSOP20, JEDEC Rth(j-a) 108 °C/W JEDEC (4.5 in x 4 in); still air 41
thermal resistance tolerance, junction-to-ambient, TSSOP20, JEDEC Rth(j-a) -15 15 % JEDEC (4.5 in x 4 in); still air 41

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LPC804M101JDH20FP
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20, generated on the KiCad land (body 4.4 x 6.5 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lpc804m101jdh20fp-etched.step / lpc804m101jdh20fp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lpc804m101jdh20fp.step / lpc804m101jdh20fp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (90 pp, sha256 4be3cee5e8ceae1d, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF