Generated by kicad-footprint-generator · KiCad file format 20260206
LPC804M101JDH20FP
NXP Semicon · NXP MCU · TSSOP-20
LPC804M101JDH20FP from NXP Semicon, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PIO0_16/ADC_3/ACMP_I4 | bidirectional | General-purpose port 0 I/O 16, also ADC input 3 and analog comparator common input 4; the pin is 5 V tolerant with configurable hysteresis and analog input, and when used as analog input its digital section is disabled and it is not 5 V tolerant. |
| 2 | PIO0_17/ADC_9 | bidirectional | General-purpose port 0 I/O 17, also ADC input 9; the pin is 5 V tolerant with configurable hysteresis and analog input, and when used as analog input its digital section is disabled and it is not 5 V tolerant. |
| 3 | PIO0_13/ADC_10 | bidirectional | General-purpose port 0 I/O 13, also ADC input 10; the pin is 5 V tolerant with configurable pull-up/pull-down, hysteresis and high-current output driver options as a digital I/O, and when used as analog input it is not 5 V tolerant. |
| 4 | PIO0_12 | bidirectional | General-purpose port 0 I/O 12 and ISP entry pin, where a LOW level during reset starts the ISP command handler; it is a high-drive output pin and is 5 V tolerant with configurable pull-up/pull-down resistors. |
| 5 | RESET/PIO0_5 | input | External reset input where a LOW-going pulse as short as 50 ns resets the device, with a 20 ns glitch filter active in all power modes; the pin can alternatively be used as GPIO PIO0_5 or for a movable function if no external reset is needed. |
| 6 | PIO0_4/ADC_11/TRSTN | bidirectional | General-purpose port 0 I/O 4, also ADC input 11 and boundary-scan TRST (Test Reset) in boundary scan mode; in ISP mode it is the U0_TXD pin for single supply devices, and the pin is 5 V tolerant. |
| 7 | SWCLK/PIO0_3/TCK | input | Serial Wire Clock input, enabled by default on this pin, which is also TCK (Test Clock) in boundary scan mode and general-purpose port 0 I/O 3 when not used for SWD; the pin is 5 V tolerant. |
| 8 | SWDIO/PIO0_2/TMS | bidirectional | Serial Wire Debug I/O, enabled by default on this pin and also TMS (Test Mode Select) in boundary scan mode or general-purpose port 0 I/O 2; the pin is a high-drive output pin and is 5 V tolerant with configurable pull-up/pull-down resistors. |
| 9 | PIO0_11/ADC_6/WKTCLKIN | bidirectional | General-purpose port 0 I/O 11, also ADC input 6 and an external clock input for the self-wake-up timer (WKTCLKIN) that is active in sleep, deep-sleep and power-down modes when selected in the wake-up timer CTRL register; the pin is a WAKEUP pin. |
| 10 | PIO0_10/ADC_7 | bidirectional | General-purpose port 0 I/O 10 and ADC input 7; the pin is a WAKEUP pin for deep power-down wake-up and is 5 V tolerant with configurable pull-up/pull-down resistors. |
| 11 | PIO0_15/ADC_8 | bidirectional | General-purpose port 0 I/O 15 and ADC input 8; the pin is 5 V tolerant with configurable pull-up/pull-down resistors and hysteresis. |
| 12 | PIO0_1/ADC_0/ACMP_I2/TDI/CLKIN | bidirectional | General-purpose port 0 I/O 1, also ADC input 0, analog comparator input 2, external clock input CLKIN, and boundary-scan TDI (Test Data In) in boundary scan mode; the pin is 5 V tolerant with configurable hysteresis and analog input. |
| 13 | PIO0_9/ADC_4 | bidirectional | General-purpose port 0 I/O 9 and ADC input 4; in ISP mode it is the U0_TXD pin for dual supply devices, and the pin is 5 V tolerant with configurable hysteresis and analog input. |
| 14 | PIO0_8/ADC_5 | bidirectional | General-purpose port 0 I/O 8 and ADC input 5; in ISP mode it is the U0_RXD pin for dual supply devices, and the pin is a WAKEUP pin that is 5 V tolerant with configurable hysteresis and analog input. |
| 15 | VDD | power_in | Supply voltage; if VDDIO is not present, VDD supplies the core voltage regulator and the I/Os on both sides of the package. |
| 16 | VSS | power_in | Ground reference for the device. |
| 17 | PIO0_7/ADC_1/ACMPVREF | bidirectional | General-purpose port 0 I/O 7, also ADC input 1 and alternate reference voltage ACMPVREF for the analog comparator; the pin is 5 V tolerant with configurable hysteresis and analog input. |
| 18 | VREFP | power_in | ADC positive reference voltage that must be equal to or lower than VDD. |
| 19 | PIO0_0/ACMP_I1/TDO | bidirectional | General-purpose port 0 I/O 0, also analog comparator input 1 and boundary-scan TDO (Test Data Out) in boundary scan mode; in ISP mode it is the U0_RXD pin for single supply devices, and the pin is 5 V tolerant with configurable hysteresis and analog input. |
| 20 | PIO0_14/ADC_2/ACMP_I3 | bidirectional | General-purpose port 0 I/O 14, also analog comparator common input 3 and ADC input 2; the pin is 5 V tolerant with configurable hysteresis and analog input. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | TSSOP-20 |
| Category | Embedded Processors & Controllers |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| supply voltage (core and external rail) | VDD | -0.5 | 4.6 | V | 39 | ||
| reference voltage on pin VREFP | Vref | -0.5 | V | 39 | |||
| input voltage, 5 V tolerant I/O pins | VI | -0.5 | 5.4 | V | 5 V tolerant I/O pins; VDD 1.71 V | 39 | |
| input voltage, 3 V tolerant I/O pin ACMPVREF | VI | -0.5 | 3.6 | V | 3 V tolerant I/O pin ACMPVREF | 39 | |
| analog input voltage on digital pins configured for an analog function | VIA | -0.5 | 4.6 | V | 39 | ||
| supply current per supply pin (TSSOP20) | IDD | 18 | mA | per supply pin (TSSOP20) | 39 | ||
| ground current per ground pin (TSSOP20) | ISS | 40 | mA | per ground pin (TSSOP20) | 39 | ||
| storage temperature | Tstg | -65 | 150 | °C | 39 | ||
| maximum junction temperature | Tj(max) | 150 | °C | 39 | |||
| total power dissipation (per package), TSSOP20 | Ptot(pack) | 0.36 | W | TSSOP20, based on package heat transfer, not device power consumption; JEDEC (4.5 in x 4 in); still air | 39 | ||
| electrostatic discharge voltage, human body model, all pins | Vesd | 2000 | V | human body model; all pins | 40 | ||
| clock frequency, internal CPU/system clock | fclk | 15 | MHz | internal CPU/system clock | 42 | ||
| supply voltage (core and external rail) | VDD | 1.71 | 3.6 | V | 42 | ||
| supply voltage for ADC operations | VDD | 2.5 | 3.6 | V | For ADC operations | 42 | |
| supply voltage for DAC operations | VDD | 2.7 | 3.6 | V | For DAC operations | 42 | |
| ADC positive reference voltage | Vref | 2.5 | V | on pin VREFP | 42 | ||
| input/output capacitance, pins with analog and digital functions | Cio | 7.1 | pF | pins with analog and digital functions | 42 | ||
| input/output capacitance, pins with digital functions only | Cio | 2.8 | pF | pins with digital functions only | 42 | ||
| supply current, deep-sleep mode | IDD | 100 | 175 | µA | Deep-sleep mode; VDD = 3.3 V; Tamb = 25 C | 43 | |
| supply current, deep-sleep mode | IDD | 240 | µA | Deep-sleep mode; VDD = 3.3 V; Tamb = 105 C | 43 | ||
| supply current, power-down mode | IDD | 6 | 14 | µA | Power-down mode; VDD = 3.3 V; Tamb = 25 C | 43 | |
| supply current, power-down mode | IDD | 75 | µA | Power-down mode; VDD = 3.3 V; Tamb = 105 C | 43 | ||
| supply current, deep power-down mode | IDD | 0.15 | 0.5 | µA | Deep power-down mode; VDD = 3.3 V; Tamb = 25 C | 43 | |
| supply current, deep power-down mode | IDD | 7 | µA | Deep power-down mode; VDD = 3.3 V; Tamb = 105 C | 43 | ||
| LOW-level input current | IIL | 0.5 | 10 | nA | VI = 0 V; on-chip pull-up resistor disabled | 47 | |
| HIGH-level input current | IIH | 0.5 | 10 | nA | VI = VDD; on-chip pull-down resistor disabled | 47 | |
| OFF-state output current | IOZ | 0.5 | 10 | nA | VO = 0 V; VO = VDD; on-chip pull-up/down resistors disabled | 47 | |
| input voltage, 5 V tolerant pins except PIO0_7 | VI | 0 | 5.4 | V | VDD 1.71 V; 5 V tolerant pins except PIO0_7 | 47 | |
| input voltage, VDD = 0 V | VI | 0 | 3.6 | V | VDD = 0 V | 47 | |
| LOW-level output voltage | VOL | 0.5 | V | IOL = 4 mA; 2.5 V <= VDD <= 3.6 V | 47 | ||
| HIGH-level output current | IOH | 4 | mA | VOH = VDD - 0.4 V; 2.5 V <= VDD <= 3.6 V | 47 | ||
| HIGH-level output current | IOH | 3 | mA | VOH = VDD - 0.5 V; 1.71 V <= VDD < 2.5 V | 47 | ||
| LOW-level output current | IOL | 4 | mA | VOL = 0.5 V; 2.5 V <= VDD <= 3.6 V | 47 | ||
| LOW-level output current | IOL | 3 | mA | VOL = 0.5 V; 1.71 V <= VDD < 2.5 V | 47 | ||
| HIGH-level short-circuit output current | IOHS | 45 | mA | VOH = 0 V | 47 | ||
| LOW-level short-circuit output current | IOLS | 50 | mA | VOL = VDD | 47 | ||
| pull-down current | Ipd | 10 | 50 | 150 | µA | VI = 5 V | 47 |
| pull-up current | Ipu | 10 | 50 | 90 | µA | VI = 0 V; 2.0 V <= VDD <= 3.6 V | 47 |
| pull-up current | Ipu | 7 | 50 | 85 | µA | VI = 0 V; 1.71 V <= VDD < 2.0 V | 47 |
| pull-up current | Ipu | 0 | 0 | 0 | µA | VDD < VI < 5 V | 47 |
| endurance | Nendu | 200000 | 500000 | cycles | 52 | ||
| retention time, powered | tret | 10 | years | powered | 52 | ||
| retention time, not powered | tret | 20 | years | not powered | 52 | ||
| FRO clock frequency tolerance, 9 MHz | fosc(RC) | -1 | 1 | % | 0 C <= Tamb <= 70 C | 53 | |
| FRO clock frequency tolerance, 12 MHz | fosc(RC) | -1 | 1 | % | 0 C <= Tamb <= 70 C | 53 | |
| FRO clock frequency tolerance, 15 MHz | fosc(RC) | -1 | 1 | % | 0 C <= Tamb <= 70 C | 53 | |
| FRO clock frequency tolerance, 9 MHz | fosc(RC) | -2 | 1 | % | 20 C <= Tamb <= 70 C | 53 | |
| FRO clock frequency tolerance, 12 MHz | fosc(RC) | -2 | 1 | % | 20 C <= Tamb <= 70 C | 53 | |
| FRO clock frequency tolerance, 15 MHz | fosc(RC) | -2 | 1 | % | 20 C <= Tamb <= 70 C | 53 | |
| FRO clock frequency tolerance, 9 MHz | fosc(RC) | -2 | 2 | % | Tamb <= 85 C (lower bound not legible in extracted text) | 53 | |
| FRO clock frequency tolerance, 12 MHz | fosc(RC) | -2 | 2 | % | Tamb <= 85 C (lower bound not legible in extracted text) | 53 | |
| FRO clock frequency tolerance, 15 MHz | fosc(RC) | -2 | 2 | % | Tamb <= 85 C (lower bound not legible in extracted text) | 53 | |
| FRO clock frequency tolerance, 9 MHz | fosc(RC) | -3.5 | 2.5 | % | -40 C <= Tamb <= 105 C | 53 | |
| FRO clock frequency tolerance, 12 MHz | fosc(RC) | -3.5 | 2.5 | % | -40 C <= Tamb <= 105 C | 53 | |
| FRO clock frequency tolerance, 15 MHz | fosc(RC) | -3.5 | 2.5 | % | -40 C <= Tamb <= 105 C | 53 | |
| LPOsc clock frequency tolerance, 1 MHz | fosc(RC) | -3 | 3 | % | 53 | ||
| thermal resistance, junction-to-ambient, TSSOP20, JEDEC | Rth(j-a) | 108 | °C/W | JEDEC (4.5 in x 4 in); still air | 41 | ||
| thermal resistance tolerance, junction-to-ambient, TSSOP20, JEDEC | Rth(j-a) | -15 | 15 | % | JEDEC (4.5 in x 4 in); still air | 41 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LPC804M101JDH20FP - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20, generated on the KiCad land (body 4.4 x 6.5 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lpc804m101jdh20fp-etched.step/lpc804m101jdh20fp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lpc804m101jdh20fp.step/lpc804m101jdh20fp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (90 pp, sha256
4be3cee5e8ceae1d, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).