main
Ray Publish 0.1.0 0552184

LPC2388FBD144K

NXP Semicon · NXP MCU · LQFP-144(20x20)

LPC2388FBD144K from NXP Semicon, in a LQFP-144(20x20). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 TDO output Test Data out for the JTAG interface; this pin has no built-in pull-up and no built-in pull-down resistor.
2 P3[3]/D3 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory data line 3 (D3).
3 TDI input Test Data in for the JTAG interface; this pin has a built-in pull-up resistor.
4 TMS input Test Mode Select for the JTAG interface; this pin has a built-in pull-up resistor.
5 TRST input Test Reset for the JTAG interface; this pin has a built-in pull-up resistor.
6 DBGEN input JTAG interface control signal, also used for boundary scanning; this pin has a built-in pull-up resistor.
7 TCK input Test Clock for the JTAG interface; this clock must be slower than 1/6 of the CPU clock (CCLK) for the JTAG interface to operate, and the pin has no built-in pull-up or pull-down.
8 P0[26]/AD0[3]/AOUT/RXD3 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis and analog input; alternate functions are A/D converter 0 input 3, D/A converter output AOUT and UART3 receiver input RXD3.
9 P3[4]/D4 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory data line 4 (D4).
10 P0[25]/AD0[2]/I2SRX_SDA/TXD3 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels, hysteresis and analog input; alternate functions are A/D converter 0 input 2, I2S receive data and UART3 transmitter output TXD3.
11 P0[24]/AD0[1]/I2SRX_WS/CAP3[1] bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels, hysteresis and analog output; when configured as DAC output the digital section is disabled, and alternate functions are A/D converter 0 input 1, I2S receive word select and Timer 3 capture input 1.
12 P3[5]/D5 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory data line 5 (D5).
13 P0[23]/AD0[0]/I2SRX_CLK/CAP3[0] bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels, hysteresis and analog input; alternate functions are A/D converter 0 input 0, I2S receive clock and Timer 3 capture input 0.
14 VDDA power_in Analog 3.3 V pad supply voltage, nominally the same as VDD(3V3) but isolated to minimize noise and error; it powers the ADC and DAC.
15 VSSA power_in Analog ground 0 V reference, nominally the same as VSS but isolated to minimize noise and error.
16 P3[6]/D6 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory data line 6 (D6).
17 VREF power_in ADC reference voltage, nominally the same as VDD(3V3) but isolated; the level on this pin is the reference for the ADC and DAC.
18 VDD(DCDC)(3V3) power_in 3.3 V DC-to-DC converter supply voltage, the power supply for the on-chip DC-to-DC converter only.
19 P3[7]/D7 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory data line 7 (D7).
20 RSTOUT output 3.3 V pin; LOW on this pin indicates the LPC2388 is in Reset state.
21 n.c. unconnected Not connected; leave this pin unconnected.
22 VSS power_in Ground 0 V reference.
23 RTCX1 input Input to the RTC oscillator circuit; these pins can be left floating if the RTC is not used.
24 RESET input External reset input; a LOW on this pin resets the device, with TTL levels and hysteresis, 5 V tolerant and a 20 ns glitch filter.
25 RTCX2 output Output from the RTC oscillator circuit; this pin can be left floating if the RTC is not used.
26 ALARM output RTC controlled output that goes HIGH when an RTC alarm is generated; this is a 1.8 V pin.
27 VBAT power_in RTC power supply; 3.3 V on this pin supplies power to the RTC peripheral.
28 P1[31]/USB_OVRCR2/SCK1/AD0[5] bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels, hysteresis and analog input; alternate functions are USB port 2 over-current status, SSP1 serial clock and A/D converter 0 input 5.
29 P0[12]/USB_PPWR2/MISO1/AD0[6] bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels, hysteresis and analog input; alternate functions are USB port 2 port power enable, SSP1 MISO and A/D converter 0 input 6.
30 P1[30]/USB_PWRD2/VBUS/AD0[4] bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels, hysteresis and analog input; alternate functions are USB port 2 power status, VBUS USB bus power monitor (must be HIGH for USB reset) and A/D converter 0 input 4.
31 XTAL1 input Input to the oscillator circuit and internal clock generator; when the main oscillator is not used it can be left floating or grounded, with grounding preferred.
32 P0[13]/USB_UP_LED2/MOSI1/AD0[7] bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels, hysteresis and analog input; alternate functions are USB port 2 GoodLink LED output, SSP1 MOSI and A/D converter 0 input 7.
33 XTAL2 output Output from the oscillator amplifier; this pin should be left floating when the main oscillator is not used.
34 P0[28]/SCL0 bidirectional General purpose digital I/O with open-drain output on a 5 V tolerant pad compatible with the I2C-bus 400 kHz specification; alternate function is I2C0 clock SCL0.
35 P0[27]/SDA0 bidirectional General purpose digital I/O with open-drain output on a 5 V tolerant pad compatible with the I2C-bus 400 kHz specification; alternate function is I2C0 data SDA0.
36 P0[31]/USB_D+2 bidirectional General purpose digital I/O; alternate function is USB port 2 bidirectional D+ line, on a pad designed to USB specification revision 2.0 (Full-speed and Low-speed mode only).
37 USB_D2 bidirectional USB port 2 bidirectional D line as listed in Table 3 (no table note given for this pin).
38 P3[26]/MAT0[1]/PWM1[3] bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are Timer 0 match output 1 and PWM1 output 3.
39 P3[25]/MAT0[0]/PWM1[2] bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are Timer 0 match output 0 and PWM1 output 2.
40 P3[24]/CAP0[1]/PWM1[1] bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are Timer 0 capture input 1 and PWM1 output 1.
41 VDD(3V3) power_in 3.3 V supply voltage for the I/O ports.
42 P0[29]/USB_D+1 bidirectional General purpose digital I/O; alternate function is USB port 1 bidirectional D+ line, on a pad designed to USB specification revision 2.0 (Full-speed and Low-speed mode only).
43 P0[30]/USB_D1 bidirectional General purpose digital I/O; alternate function is USB port 1 bidirectional D line, on a pad designed to USB specification revision 2.0 (Full-speed and Low-speed mode only).
44 VSS power_in Ground 0 V reference.
45 P3[23]/CAP0[0]/PCAP1[0] bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are Timer 0 capture input 0 and PWM1 capture input 0.
46 P1[18]/USB_UP_LED1/PWM1[1]/CAP1[0] bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are USB port 1 GoodLink LED output, PWM1 output 1 and Timer 1 capture input 0.
47 P1[19]/USB_TX_E1/USB_PPWR1/CAP1[1] bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are USB port 1 OTG transmit enable, USB port 1 power enable and Timer 1 capture input 1.
48 P0[14]/USB_HSTEN2/USB_CONNECT2/SSEL1 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are USB port 2 host enabled status, USB port 2 SoftConnect control (switches an external 1.5 k resistor) and SSP1 slave select.
49 P1[20]/USB_TX_DP1/PWM1[2]/SCK0 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are USB port 1 D+ transmit data, PWM1 output 2 and SSP0 serial clock.
50 P1[21]/USB_TX_DM1/PWM1[3]/SSEL0 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are USB port 1 D transmit data, PWM1 output 3 and SSP0 slave select.
51 P1[22]/USB_RCV1/USB_PWRD1/MAT1[0] bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are USB port 1 differential receive data, USB port 1 power status and Timer 1 match output 0.
52 P4[0]/A0 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 0 (A0).
53 P1[23]/USB_RX_DP1/PWM1[4]/MISO0 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are USB port 1 D+ receive data, PWM1 output 4 and SSP0 MISO.
54 P1[24]/USB_RX_DM1/PWM1[5]/MOSI0 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are USB port 1 D receive data, PWM1 output 5 and SSP0 MOSI.
55 P4[1]/A1 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 1 (A1).
56 P1[25]/USB_LS1/USB_HSTEN1/MAT1[1] bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are USB port 1 low-speed status, USB port 1 host enabled status and Timer 1 match output 1.
57 P1[26]/USB_SSPND1/PWM1[6]/CAP0[0] bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are USB port 1 bus suspend status, PWM1 output 6 and Timer 0 capture input 0.
58 P4[2]/A2 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 2 (A2).
59 VSS power_in Ground 0 V reference.
60 VDD(DCDC)(3V3) power_in 3.3 V DC-to-DC converter supply voltage, the power supply for the on-chip DC-to-DC converter only.
61 P1[27]/USB_INT1/USB_OVRCR1/CAP0[1] bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are USB port 1 OTG transceiver interrupt, USB port 1 over-current status and Timer 0 capture input 1.
62 VDD(3V3) power_in 3.3 V supply voltage for the I/O ports.
63 P1[28]/USB_SCL1/PCAP1[0]/MAT0[0] bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are USB port 1 I2C-bus serial clock, PWM1 capture input 0 and Timer 0 match output 0.
64 P1[29]/USB_SDA1/PCAP1[1]/MAT0[1] bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are USB port 1 I2C-bus serial data, PWM1 capture input 1 and Timer 0 match output 1.
65 VSS power_in Ground 0 V reference.
66 P0[0]/RD1/TXD3/SDA1 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are CAN1 receiver input RD1, UART3 transmitter output TXD3 and I2C1 data SDA1 (not an open-drain pin).
67 P0[1]/TD1/RXD3/SCL1 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are CAN1 transmitter output TD1, UART3 receiver input RXD3 and I2C1 clock SCL1 (not an open-drain pin).
68 P4[3]/A3 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 3 (A3).
69 P0[10]/TXD2/SDA2/MAT3[0] bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are UART2 transmitter output TXD2, I2C2 data SDA2 (not an open-drain pin) and Timer 3 match output 0.
70 P0[11]/RXD2/SCL2/MAT3[1] bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are UART2 receiver input RXD2, I2C2 clock SCL2 (not an open-drain pin) and Timer 3 match output 1.
71 P2[13]/EINT3/MCIDAT3/I2STX_SDA bidirectional General purpose digital I/O on a 5 V tolerant pad with a 10 ns glitch filter, TTL levels and hysteresis; alternate functions are external interrupt 3, SD/MMC data line 3 and I2S transmit data.
72 P4[4]/A4 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 4 (A4).
73 P2[12]/EINT2/MCIDAT2/I2STX_WS bidirectional General purpose digital I/O on a 5 V tolerant pad with a 10 ns glitch filter, TTL levels and hysteresis; alternate functions are external interrupt 2, SD/MMC data line 2 and I2S transmit word select.
74 P4[5]/A5 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 5 (A5).
75 P2[11]/EINT1/MCIDAT1/I2STX_CLK bidirectional General purpose digital I/O on a 5 V tolerant pad with a 10 ns glitch filter, TTL levels and hysteresis; alternate functions are external interrupt 1, SD/MMC data line 1 and I2S transmit clock.
76 P2[10]/EINT0 bidirectional General purpose digital I/O on a 5 V tolerant pad with a 10 ns glitch filter, TTL levels and hysteresis; alternate function is external interrupt 0, and a LOW on this pin while RESET is LOW forces the on-chip boot-loader to take control after reset.
77 VDD(3V3) power_in 3.3 V supply voltage for the I/O ports.
78 P4[6]/A6 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 6 (A6).
79 VSS power_in Ground 0 V reference.
80 P0[22]/RTS1/MCIDAT0/TD1 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are UART1 request to send output RTS1, SD/MMC data line 0 and CAN1 transmitter output TD1.
81 n.c. unconnected Not connected; leave this pin unconnected.
82 P0[21]/RI1/MCIPWR/RD1 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are UART1 ring indicator input RI1, SD/MMC power supply enable MCIPWR and CAN1 receiver input RD1.
83 P0[20]/DTR1/MCICMD/SCL1 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are UART1 data terminal ready output DTR1, SD/MMC command line MCICMD and I2C1 clock SCL1 (not an open-drain pin).
84 P4[7]/A7 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 7 (A7).
85 P0[19]/DSR1/MCICLK/SDA1 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are UART1 data set ready input DSR1, SD/MMC clock output MCICLK and I2C1 data SDA1 (not an open-drain pin).
86 P0[18]/DCD1/MOSI0/MOSI bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are UART1 data carrier detect input DCD1, SSP0 MOSI and SPI MOSI.
87 P0[17]/CTS1/MISO0/MISO bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are UART1 clear to send input CTS1, SSP0 MISO and SPI MISO.
88 P4[8]/A8 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 8 (A8).
89 P0[15]/TXD1/SCK0/SCK bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are UART1 transmitter output TXD1, SSP0 serial clock SCK0 and SPI serial clock SCK.
90 P0[16]/RXD1/SSEL0/SSEL bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are UART1 receiver input RXD1, SSP0 slave select SSEL0 and SPI slave select SSEL.
91 P4[9]/A9 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 9 (A9).
92 P2[9]/USB_CONNECT1/RXD2/EXTIN0 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are USB port 1 SoftConnect control (switches an external 1.5 k resistor), UART2 receiver input RXD2 and external trigger input EXTIN0.
93 P2[8]/TD2/TXD2/TRACEPKT3 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are CAN2 transmitter output TD2, UART2 transmitter output TXD2 and ETM trace packet bit 3.
94 P4[10]/A10 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 10 (A10).
95 P2[7]/RD2/RTS1/TRACEPKT2 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are CAN2 receiver input RD2, UART1 request to send output RTS1 and ETM trace packet bit 2.
96 P2[6]/PCAP1[0]/RI1/TRACEPKT1 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are PWM1 capture input 0, UART1 ring indicator input RI1 and ETM trace packet bit 1.
97 P2[5]/PWM1[6]/DTR1/TRACEPKT0 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are PWM1 output 6, UART1 data terminal ready output DTR1 and ETM trace packet bit 0.
98 n.c. unconnected Not connected; leave this pin unconnected.
99 P2[4]/PWM1[5]/DSR1/TRACESYNC bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are PWM1 output 5, UART1 data set ready input DSR1 and ETM trace synchronization.
100 P2[3]/PWM1[4]/DCD1/PIPESTAT2 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are PWM1 output 4, UART1 data carrier detect input DCD1 and pipeline status bit 2.
101 P4[11]/A11 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 11 (A11).
102 VDD(3V3) power_in 3.3 V supply voltage for the I/O ports.
103 VSS power_in Ground 0 V reference.
104 P4[12]/A12 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 12 (A12).
105 P2[2]/PWM1[3]/CTS1/PIPESTAT1 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are PWM1 output 3, UART1 clear to send input CTS1 and pipeline status bit 1.
106 P2[1]/PWM1[2]/RXD1/PIPESTAT0 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are PWM1 output 2, UART1 receiver input RXD1 and pipeline status bit 0.
107 P2[0]/PWM1[1]/TXD1/TRACECLK bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are PWM1 output 1, UART1 transmitter output TXD1 and ETM trace clock; LOW on RESET-related pin RTCK selects this trace port after reset.
108 P4[13]/A13 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 13 (A13).
109 P0[9]/I2STX_SDA/MOSI1/MAT2[3] bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are I2S transmit data, SSP1 MOSI and Timer 2 match output 3.
110 P4[14]/A14 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 14 (A14).
111 P0[8]/I2STX_WS/MISO1/MAT2[2] bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are I2S transmit word select, SSP1 MISO and Timer 2 match output 2.
112 P0[7]/I2STX_CLK/SCK1/MAT2[1] bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are I2S transmit clock, SSP1 serial clock SCK1 and Timer 2 match output 1.
113 P0[6]/I2SRX_SDA/SSEL1/MAT2[0] bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are I2S receive data, SSP1 slave select SSEL1 and Timer 2 match output 0.
114 VDD(3V3) power_in 3.3 V supply voltage for the I/O ports.
115 P0[5]/I2SRX_WS/TD2/CAP2[1] bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are I2S receive word select, CAN2 transmitter output TD2 and Timer 2 capture input 1.
116 P0[4]/I2SRX_CLK/RD2/CAP2[0] bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are I2S receive clock, CAN2 receiver input RD2 and Timer 2 capture input 0.
117 VSS power_in Ground 0 V reference.
118 P4[28]/MAT2[0]/TXD3 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are Timer 2 match output 0 and UART3 transmitter output TXD3.
119 VSS power_in Ground 0 V reference.
120 P4[15]/A15 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 15 (A15).
121 VDD(DCDC)(3V3) power_in 3.3 V DC-to-DC converter supply voltage, the power supply for the on-chip DC-to-DC converter only.
122 P4[29]/MAT2[1]/RXD3 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are Timer 2 match output 1 and UART3 receiver input RXD3.
123 P1[17]/ENET_MDIO bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is Ethernet MI data input and output ENET_MDIO.
124 P4[25]/BLS0 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is LOW-active byte lane select signal 0 (BLS0).
125 P1[16]/ENET_MDC bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is Ethernet MIIM clock ENET_MDC.
126 P1[15]/ENET_REF_CLK bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is Ethernet receiver clock ENET_REF_CLK/ENET_RX_CLK.
127 P4[24]/OE bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is LOW-active output enable signal OE.
128 P1[14]/ENET_RX_ER bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is Ethernet receive error input ENET_RX_ER.
129 P1[10]/ENET_RXD1 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is Ethernet receive data bit 1 (ENET_RXD1).
130 P4[30]/CS0 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is LOW-active chip select 0 signal (CS0).
131 P1[9]/ENET_RXD0 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is Ethernet receive data bit 0 (ENET_RXD0).
132 P1[8]/ENET_CRS bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is Ethernet carrier sense input ENET_CRS.
133 P1[4]/ENET_TX_EN bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is Ethernet transmit data enable ENET_TX_EN.
134 P4[31]/CS1 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is LOW-active chip select 1 signal (CS1).
135 P1[1]/ENET_TXD1 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is Ethernet transmit data bit 1 (ENET_TXD1).
136 P1[0]/ENET_TXD0 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is Ethernet transmit data bit 0 (ENET_TXD0).
137 P3[0]/D0 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory data line 0 (D0).
138 VDD(3V3) power_in 3.3 V supply voltage for the I/O ports.
139 VSS power_in Ground 0 V reference.
140 P3[1]/D1 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory data line 1 (D1).
141 P0[2]/TXD0 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is UART0 transmitter output TXD0.
142 P0[3]/RXD0 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is UART0 receiver input RXD0.
143 RTCK bidirectional JTAG interface control signal with a built-in pull-up resistor; LOW on this pin while RESET is LOW enables the ETM pins P2[9:0] to operate as the trace port after reset.
144 P3[2]/D2 bidirectional General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory data line 2 (D2).

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package LQFP-144(20x20)
Category Embedded Processors & Controllers
Pins 144

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Maximum junction temperature Tj(max) 125 °C 40
VDD(3V3) supply voltage (3.3 V) core and external rail VDD(3V3) 3 3.6 V 39
VDD(DCDC)(3V3) DC-to-DC converter supply voltage (3.3 V) VDD(DCDC)(3V3) 3 3.6 V 39
VDDA analog 3.3 V pad supply voltage VDDA -0.5 4.6 V 39
Input voltage on pin VBAT for the RTC Vi(VBAT) -0.5 4.6 V 39
Input voltage on pin VREF Vi(VREF) -0.5 4.6 V 39
Analog input voltage on ADC related pins VIA -0.5 5.1 V 39
Input voltage 5 V tolerant I/O pins VI -0.5 6 V only valid when the VDD(3V3) supply voltage is present 39
Supply current per supply pin IDD 100 mA 39
Ground current per ground pin ISS 100 mA 39
Storage temperature Tstg -65 150 °C non-operating 39
Total power dissipation (per package) Ptot(pack) 1.5 W based on package heat transfer, not device power consumption 39
Electrostatic discharge voltage, human body model, all pins VESD -2500 2500 V human body model; all pins 39
VDD(3V3) supply voltage (3.3 V) core and external rail VDD(3V3) 3 3.3 3.6 V 41
VDD(DCDC)(3V3) DC-to-DC converter supply voltage (3.3 V) VDD(DCDC)(3V3) 3 3.3 3.6 V 41
VDDA analog 3.3 V pad supply voltage VDDA 3 3.3 3.6 V 41
Input voltage on pin VBAT Vi(VBAT) 2 3.3 3.6 V 41
Input voltage on pin VREF Vi(VREF) 2.5 3.3 V 41
Input voltage pin configured to provide a digital function VI 0 5.5 V pin configured to provide a digital function 42
HIGH-level input voltage VIH 2 V 42
LOW-level input voltage VIL 0.8 V 42
Hysteresis voltage Vhys 0.4 V 42
LOW-level output voltage VOL 0.4 V IOL = 4 mA 42
HIGH-level output current IOH 4 mA VOH = VDD(3V3) - 0.4 V 42
LOW-level output current IOL 4 mA VOL = 0.4 V 42
HIGH-level short-circuit output current IOHS 45 mA VOH = 0 V 42
LOW-level short-circuit output current IOLS 50 mA VOL = VDDA 42
Pull-down current Ipd 10 50 150 µA VI = 5 V 42
Pull-up current Ipu 15 50 85 µA VI = 0 V 42
LOW-level input current IIL 3 µA VI = 0 V; no pull-up 41
HIGH-level input current IIH 3 µA VI = VDD(3V3); no pull-down 41
OFF-state output current IOZ 3 µA VO = 0 V; VO = VDD(3V3); no pull-up/down 41
I/O latch-up current Ilatch 100 mA (0.5VDD(3V3)) < VI < (1.5VDD(3V3)); Tj < 125 °C 42
LOW-level output voltage (I2C-bus pins P0[27] and P0[28]) VOL 0.4 V IOLS = 3 mA 42
Input leakage current (I2C-bus pins) ILI -2 4 µA VI = VDD(3V3) 42
Input leakage current (I2C-bus pins) ILI 10 22 µA VI = 5 V 42
Input voltage on pin XTAL1 Vi(XTAL1) -0.5 1.8 1.95 V 42
Output voltage on pin XTAL2 Vo(XTAL2) -0.5 1.8 1.95 V 42
Input voltage on pin RTCX1 Vi(RTCX1) -0.5 1.8 1.95 V 42
Output voltage on pin RTCX2 Vo(RTCX2) -0.5 1.8 1.95 V 43
Input voltage on pin VIA 0 V 54
Analog input capacitance Cia 1 pF 54
Differential linearity error ED 1 LSB VSSA = 0 V; VDDA = 3.3 V 54
Integral non-linearity EL(adj) 2 LSB VSSA = 0 V; VDDA = 3.3 V 54
Offset error EO 3 LSB VSSA = 0 V; VDDA = 3.3 V 54
Gain error EG 0.5 % VSSA = 0 V; VDDA = 3.3 V 54
Absolute error ET 4 LSB VSSA = 0 V; VDDA = 3.3 V 54
Voltage source interface resistance Rvsi 40 kΩ see Figure 18 54
Oscillator frequency (external clock) fosc 1 25 MHz external clock; see Figure 12 48
Internal RC oscillator frequency fosc(RC) 3.96 4.02 4.04 MHz 49
Rise time (pin configured as output) tr 3 5 ns pin configured as output 49
Fall time (pin configured as output) tf 2.5 5 ns pin configured as output 49
Thermal resistance junction-to-ambient, JEDEC 4.5 in x 4 in, 0 m/s Rth(j-a) 31.5 °C/W JEDEC (4.5 in x 4 in); 0 m/s 40
Thermal resistance junction-to-ambient, JEDEC 4.5 in x 4 in, 1 m/s Rth(j-a) 28.1 °C/W JEDEC (4.5 in x 4 in); 1 m/s 40
Thermal resistance junction-to-ambient, JEDEC 4.5 in x 4 in, 2.5 m/s Rth(j-a) 26.2 °C/W JEDEC (4.5 in x 4 in); 2.5 m/s 40
Thermal resistance junction-to-ambient, single-layer 4.5 in x 3 in, 0 m/s Rth(j-a) 43.2 °C/W Single-layer (4.5 in x 3 in); 0 m/s 40
Thermal resistance junction-to-ambient, single-layer 4.5 in x 3 in, 1 m/s Rth(j-a) 35.7 °C/W Single-layer (4.5 in x 3 in); 1 m/s 40
Thermal resistance junction-to-ambient, single-layer 4.5 in x 3 in, 2.5 m/s Rth(j-a) 32.8 °C/W Single-layer (4.5 in x 3 in); 2.5 m/s 40
Thermal resistance junction-to-case Rth(j-c) 7.8 °C/W 40
Thermal resistance junction-to-board Rth(j-b) 13.8 °C/W 40

CAD (KiCad official)

  • Symbol: LPC2388FBD144K
  • Footprint: Package_QFP:LQFP-144_20x20mm_P0.5mm
  • 3D model: LQFP-144(20x20) (KiCad packages3D, STEP)
  • 3D model files: lpc2388fbd144k-etched.step / lpc2388fbd144k-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lpc2388fbd144k.step / lpc2388fbd144k.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (74 pp, sha256 50cc380cbd577998, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF