component
LPC2388FBD144K
Public Made by Adomby adom
NXP Semicon NXP MCU, LQFP-144(20x20). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLPC2388FBD144K
NXP Semicon · NXP MCU · LQFP-144(20x20)
LPC2388FBD144K from NXP Semicon, in a LQFP-144(20x20). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TDO | output | Test Data out for the JTAG interface; this pin has no built-in pull-up and no built-in pull-down resistor. |
| 2 | P3[3]/D3 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory data line 3 (D3). |
| 3 | TDI | input | Test Data in for the JTAG interface; this pin has a built-in pull-up resistor. |
| 4 | TMS | input | Test Mode Select for the JTAG interface; this pin has a built-in pull-up resistor. |
| 5 | TRST | input | Test Reset for the JTAG interface; this pin has a built-in pull-up resistor. |
| 6 | DBGEN | input | JTAG interface control signal, also used for boundary scanning; this pin has a built-in pull-up resistor. |
| 7 | TCK | input | Test Clock for the JTAG interface; this clock must be slower than 1/6 of the CPU clock (CCLK) for the JTAG interface to operate, and the pin has no built-in pull-up or pull-down. |
| 8 | P0[26]/AD0[3]/AOUT/RXD3 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis and analog input; alternate functions are A/D converter 0 input 3, D/A converter output AOUT and UART3 receiver input RXD3. |
| 9 | P3[4]/D4 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory data line 4 (D4). |
| 10 | P0[25]/AD0[2]/I2SRX_SDA/TXD3 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels, hysteresis and analog input; alternate functions are A/D converter 0 input 2, I2S receive data and UART3 transmitter output TXD3. |
| 11 | P0[24]/AD0[1]/I2SRX_WS/CAP3[1] | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels, hysteresis and analog output; when configured as DAC output the digital section is disabled, and alternate functions are A/D converter 0 input 1, I2S receive word select and Timer 3 capture input 1. |
| 12 | P3[5]/D5 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory data line 5 (D5). |
| 13 | P0[23]/AD0[0]/I2SRX_CLK/CAP3[0] | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels, hysteresis and analog input; alternate functions are A/D converter 0 input 0, I2S receive clock and Timer 3 capture input 0. |
| 14 | VDDA | power_in | Analog 3.3 V pad supply voltage, nominally the same as VDD(3V3) but isolated to minimize noise and error; it powers the ADC and DAC. |
| 15 | VSSA | power_in | Analog ground 0 V reference, nominally the same as VSS but isolated to minimize noise and error. |
| 16 | P3[6]/D6 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory data line 6 (D6). |
| 17 | VREF | power_in | ADC reference voltage, nominally the same as VDD(3V3) but isolated; the level on this pin is the reference for the ADC and DAC. |
| 18 | VDD(DCDC)(3V3) | power_in | 3.3 V DC-to-DC converter supply voltage, the power supply for the on-chip DC-to-DC converter only. |
| 19 | P3[7]/D7 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory data line 7 (D7). |
| 20 | RSTOUT | output | 3.3 V pin; LOW on this pin indicates the LPC2388 is in Reset state. |
| 21 | n.c. | unconnected | Not connected; leave this pin unconnected. |
| 22 | VSS | power_in | Ground 0 V reference. |
| 23 | RTCX1 | input | Input to the RTC oscillator circuit; these pins can be left floating if the RTC is not used. |
| 24 | RESET | input | External reset input; a LOW on this pin resets the device, with TTL levels and hysteresis, 5 V tolerant and a 20 ns glitch filter. |
| 25 | RTCX2 | output | Output from the RTC oscillator circuit; this pin can be left floating if the RTC is not used. |
| 26 | ALARM | output | RTC controlled output that goes HIGH when an RTC alarm is generated; this is a 1.8 V pin. |
| 27 | VBAT | power_in | RTC power supply; 3.3 V on this pin supplies power to the RTC peripheral. |
| 28 | P1[31]/USB_OVRCR2/SCK1/AD0[5] | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels, hysteresis and analog input; alternate functions are USB port 2 over-current status, SSP1 serial clock and A/D converter 0 input 5. |
| 29 | P0[12]/USB_PPWR2/MISO1/AD0[6] | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels, hysteresis and analog input; alternate functions are USB port 2 port power enable, SSP1 MISO and A/D converter 0 input 6. |
| 30 | P1[30]/USB_PWRD2/VBUS/AD0[4] | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels, hysteresis and analog input; alternate functions are USB port 2 power status, VBUS USB bus power monitor (must be HIGH for USB reset) and A/D converter 0 input 4. |
| 31 | XTAL1 | input | Input to the oscillator circuit and internal clock generator; when the main oscillator is not used it can be left floating or grounded, with grounding preferred. |
| 32 | P0[13]/USB_UP_LED2/MOSI1/AD0[7] | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels, hysteresis and analog input; alternate functions are USB port 2 GoodLink LED output, SSP1 MOSI and A/D converter 0 input 7. |
| 33 | XTAL2 | output | Output from the oscillator amplifier; this pin should be left floating when the main oscillator is not used. |
| 34 | P0[28]/SCL0 | bidirectional | General purpose digital I/O with open-drain output on a 5 V tolerant pad compatible with the I2C-bus 400 kHz specification; alternate function is I2C0 clock SCL0. |
| 35 | P0[27]/SDA0 | bidirectional | General purpose digital I/O with open-drain output on a 5 V tolerant pad compatible with the I2C-bus 400 kHz specification; alternate function is I2C0 data SDA0. |
| 36 | P0[31]/USB_D+2 | bidirectional | General purpose digital I/O; alternate function is USB port 2 bidirectional D+ line, on a pad designed to USB specification revision 2.0 (Full-speed and Low-speed mode only). |
| 37 | USB_D2 | bidirectional | USB port 2 bidirectional D line as listed in Table 3 (no table note given for this pin). |
| 38 | P3[26]/MAT0[1]/PWM1[3] | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are Timer 0 match output 1 and PWM1 output 3. |
| 39 | P3[25]/MAT0[0]/PWM1[2] | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are Timer 0 match output 0 and PWM1 output 2. |
| 40 | P3[24]/CAP0[1]/PWM1[1] | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are Timer 0 capture input 1 and PWM1 output 1. |
| 41 | VDD(3V3) | power_in | 3.3 V supply voltage for the I/O ports. |
| 42 | P0[29]/USB_D+1 | bidirectional | General purpose digital I/O; alternate function is USB port 1 bidirectional D+ line, on a pad designed to USB specification revision 2.0 (Full-speed and Low-speed mode only). |
| 43 | P0[30]/USB_D1 | bidirectional | General purpose digital I/O; alternate function is USB port 1 bidirectional D line, on a pad designed to USB specification revision 2.0 (Full-speed and Low-speed mode only). |
| 44 | VSS | power_in | Ground 0 V reference. |
| 45 | P3[23]/CAP0[0]/PCAP1[0] | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are Timer 0 capture input 0 and PWM1 capture input 0. |
| 46 | P1[18]/USB_UP_LED1/PWM1[1]/CAP1[0] | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are USB port 1 GoodLink LED output, PWM1 output 1 and Timer 1 capture input 0. |
| 47 | P1[19]/USB_TX_E1/USB_PPWR1/CAP1[1] | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are USB port 1 OTG transmit enable, USB port 1 power enable and Timer 1 capture input 1. |
| 48 | P0[14]/USB_HSTEN2/USB_CONNECT2/SSEL1 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are USB port 2 host enabled status, USB port 2 SoftConnect control (switches an external 1.5 k resistor) and SSP1 slave select. |
| 49 | P1[20]/USB_TX_DP1/PWM1[2]/SCK0 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are USB port 1 D+ transmit data, PWM1 output 2 and SSP0 serial clock. |
| 50 | P1[21]/USB_TX_DM1/PWM1[3]/SSEL0 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are USB port 1 D transmit data, PWM1 output 3 and SSP0 slave select. |
| 51 | P1[22]/USB_RCV1/USB_PWRD1/MAT1[0] | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are USB port 1 differential receive data, USB port 1 power status and Timer 1 match output 0. |
| 52 | P4[0]/A0 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 0 (A0). |
| 53 | P1[23]/USB_RX_DP1/PWM1[4]/MISO0 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are USB port 1 D+ receive data, PWM1 output 4 and SSP0 MISO. |
| 54 | P1[24]/USB_RX_DM1/PWM1[5]/MOSI0 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are USB port 1 D receive data, PWM1 output 5 and SSP0 MOSI. |
| 55 | P4[1]/A1 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 1 (A1). |
| 56 | P1[25]/USB_LS1/USB_HSTEN1/MAT1[1] | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are USB port 1 low-speed status, USB port 1 host enabled status and Timer 1 match output 1. |
| 57 | P1[26]/USB_SSPND1/PWM1[6]/CAP0[0] | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are USB port 1 bus suspend status, PWM1 output 6 and Timer 0 capture input 0. |
| 58 | P4[2]/A2 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 2 (A2). |
| 59 | VSS | power_in | Ground 0 V reference. |
| 60 | VDD(DCDC)(3V3) | power_in | 3.3 V DC-to-DC converter supply voltage, the power supply for the on-chip DC-to-DC converter only. |
| 61 | P1[27]/USB_INT1/USB_OVRCR1/CAP0[1] | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are USB port 1 OTG transceiver interrupt, USB port 1 over-current status and Timer 0 capture input 1. |
| 62 | VDD(3V3) | power_in | 3.3 V supply voltage for the I/O ports. |
| 63 | P1[28]/USB_SCL1/PCAP1[0]/MAT0[0] | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are USB port 1 I2C-bus serial clock, PWM1 capture input 0 and Timer 0 match output 0. |
| 64 | P1[29]/USB_SDA1/PCAP1[1]/MAT0[1] | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are USB port 1 I2C-bus serial data, PWM1 capture input 1 and Timer 0 match output 1. |
| 65 | VSS | power_in | Ground 0 V reference. |
| 66 | P0[0]/RD1/TXD3/SDA1 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are CAN1 receiver input RD1, UART3 transmitter output TXD3 and I2C1 data SDA1 (not an open-drain pin). |
| 67 | P0[1]/TD1/RXD3/SCL1 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are CAN1 transmitter output TD1, UART3 receiver input RXD3 and I2C1 clock SCL1 (not an open-drain pin). |
| 68 | P4[3]/A3 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 3 (A3). |
| 69 | P0[10]/TXD2/SDA2/MAT3[0] | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are UART2 transmitter output TXD2, I2C2 data SDA2 (not an open-drain pin) and Timer 3 match output 0. |
| 70 | P0[11]/RXD2/SCL2/MAT3[1] | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are UART2 receiver input RXD2, I2C2 clock SCL2 (not an open-drain pin) and Timer 3 match output 1. |
| 71 | P2[13]/EINT3/MCIDAT3/I2STX_SDA | bidirectional | General purpose digital I/O on a 5 V tolerant pad with a 10 ns glitch filter, TTL levels and hysteresis; alternate functions are external interrupt 3, SD/MMC data line 3 and I2S transmit data. |
| 72 | P4[4]/A4 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 4 (A4). |
| 73 | P2[12]/EINT2/MCIDAT2/I2STX_WS | bidirectional | General purpose digital I/O on a 5 V tolerant pad with a 10 ns glitch filter, TTL levels and hysteresis; alternate functions are external interrupt 2, SD/MMC data line 2 and I2S transmit word select. |
| 74 | P4[5]/A5 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 5 (A5). |
| 75 | P2[11]/EINT1/MCIDAT1/I2STX_CLK | bidirectional | General purpose digital I/O on a 5 V tolerant pad with a 10 ns glitch filter, TTL levels and hysteresis; alternate functions are external interrupt 1, SD/MMC data line 1 and I2S transmit clock. |
| 76 | P2[10]/EINT0 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with a 10 ns glitch filter, TTL levels and hysteresis; alternate function is external interrupt 0, and a LOW on this pin while RESET is LOW forces the on-chip boot-loader to take control after reset. |
| 77 | VDD(3V3) | power_in | 3.3 V supply voltage for the I/O ports. |
| 78 | P4[6]/A6 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 6 (A6). |
| 79 | VSS | power_in | Ground 0 V reference. |
| 80 | P0[22]/RTS1/MCIDAT0/TD1 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are UART1 request to send output RTS1, SD/MMC data line 0 and CAN1 transmitter output TD1. |
| 81 | n.c. | unconnected | Not connected; leave this pin unconnected. |
| 82 | P0[21]/RI1/MCIPWR/RD1 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are UART1 ring indicator input RI1, SD/MMC power supply enable MCIPWR and CAN1 receiver input RD1. |
| 83 | P0[20]/DTR1/MCICMD/SCL1 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are UART1 data terminal ready output DTR1, SD/MMC command line MCICMD and I2C1 clock SCL1 (not an open-drain pin). |
| 84 | P4[7]/A7 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 7 (A7). |
| 85 | P0[19]/DSR1/MCICLK/SDA1 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are UART1 data set ready input DSR1, SD/MMC clock output MCICLK and I2C1 data SDA1 (not an open-drain pin). |
| 86 | P0[18]/DCD1/MOSI0/MOSI | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are UART1 data carrier detect input DCD1, SSP0 MOSI and SPI MOSI. |
| 87 | P0[17]/CTS1/MISO0/MISO | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are UART1 clear to send input CTS1, SSP0 MISO and SPI MISO. |
| 88 | P4[8]/A8 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 8 (A8). |
| 89 | P0[15]/TXD1/SCK0/SCK | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are UART1 transmitter output TXD1, SSP0 serial clock SCK0 and SPI serial clock SCK. |
| 90 | P0[16]/RXD1/SSEL0/SSEL | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are UART1 receiver input RXD1, SSP0 slave select SSEL0 and SPI slave select SSEL. |
| 91 | P4[9]/A9 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 9 (A9). |
| 92 | P2[9]/USB_CONNECT1/RXD2/EXTIN0 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are USB port 1 SoftConnect control (switches an external 1.5 k resistor), UART2 receiver input RXD2 and external trigger input EXTIN0. |
| 93 | P2[8]/TD2/TXD2/TRACEPKT3 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are CAN2 transmitter output TD2, UART2 transmitter output TXD2 and ETM trace packet bit 3. |
| 94 | P4[10]/A10 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 10 (A10). |
| 95 | P2[7]/RD2/RTS1/TRACEPKT2 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are CAN2 receiver input RD2, UART1 request to send output RTS1 and ETM trace packet bit 2. |
| 96 | P2[6]/PCAP1[0]/RI1/TRACEPKT1 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are PWM1 capture input 0, UART1 ring indicator input RI1 and ETM trace packet bit 1. |
| 97 | P2[5]/PWM1[6]/DTR1/TRACEPKT0 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are PWM1 output 6, UART1 data terminal ready output DTR1 and ETM trace packet bit 0. |
| 98 | n.c. | unconnected | Not connected; leave this pin unconnected. |
| 99 | P2[4]/PWM1[5]/DSR1/TRACESYNC | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are PWM1 output 5, UART1 data set ready input DSR1 and ETM trace synchronization. |
| 100 | P2[3]/PWM1[4]/DCD1/PIPESTAT2 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are PWM1 output 4, UART1 data carrier detect input DCD1 and pipeline status bit 2. |
| 101 | P4[11]/A11 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 11 (A11). |
| 102 | VDD(3V3) | power_in | 3.3 V supply voltage for the I/O ports. |
| 103 | VSS | power_in | Ground 0 V reference. |
| 104 | P4[12]/A12 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 12 (A12). |
| 105 | P2[2]/PWM1[3]/CTS1/PIPESTAT1 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are PWM1 output 3, UART1 clear to send input CTS1 and pipeline status bit 1. |
| 106 | P2[1]/PWM1[2]/RXD1/PIPESTAT0 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are PWM1 output 2, UART1 receiver input RXD1 and pipeline status bit 0. |
| 107 | P2[0]/PWM1[1]/TXD1/TRACECLK | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are PWM1 output 1, UART1 transmitter output TXD1 and ETM trace clock; LOW on RESET-related pin RTCK selects this trace port after reset. |
| 108 | P4[13]/A13 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 13 (A13). |
| 109 | P0[9]/I2STX_SDA/MOSI1/MAT2[3] | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are I2S transmit data, SSP1 MOSI and Timer 2 match output 3. |
| 110 | P4[14]/A14 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 14 (A14). |
| 111 | P0[8]/I2STX_WS/MISO1/MAT2[2] | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are I2S transmit word select, SSP1 MISO and Timer 2 match output 2. |
| 112 | P0[7]/I2STX_CLK/SCK1/MAT2[1] | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are I2S transmit clock, SSP1 serial clock SCK1 and Timer 2 match output 1. |
| 113 | P0[6]/I2SRX_SDA/SSEL1/MAT2[0] | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are I2S receive data, SSP1 slave select SSEL1 and Timer 2 match output 0. |
| 114 | VDD(3V3) | power_in | 3.3 V supply voltage for the I/O ports. |
| 115 | P0[5]/I2SRX_WS/TD2/CAP2[1] | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are I2S receive word select, CAN2 transmitter output TD2 and Timer 2 capture input 1. |
| 116 | P0[4]/I2SRX_CLK/RD2/CAP2[0] | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are I2S receive clock, CAN2 receiver input RD2 and Timer 2 capture input 0. |
| 117 | VSS | power_in | Ground 0 V reference. |
| 118 | P4[28]/MAT2[0]/TXD3 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are Timer 2 match output 0 and UART3 transmitter output TXD3. |
| 119 | VSS | power_in | Ground 0 V reference. |
| 120 | P4[15]/A15 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory address line 15 (A15). |
| 121 | VDD(DCDC)(3V3) | power_in | 3.3 V DC-to-DC converter supply voltage, the power supply for the on-chip DC-to-DC converter only. |
| 122 | P4[29]/MAT2[1]/RXD3 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate functions are Timer 2 match output 1 and UART3 receiver input RXD3. |
| 123 | P1[17]/ENET_MDIO | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is Ethernet MI data input and output ENET_MDIO. |
| 124 | P4[25]/BLS0 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is LOW-active byte lane select signal 0 (BLS0). |
| 125 | P1[16]/ENET_MDC | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is Ethernet MIIM clock ENET_MDC. |
| 126 | P1[15]/ENET_REF_CLK | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is Ethernet receiver clock ENET_REF_CLK/ENET_RX_CLK. |
| 127 | P4[24]/OE | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is LOW-active output enable signal OE. |
| 128 | P1[14]/ENET_RX_ER | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is Ethernet receive error input ENET_RX_ER. |
| 129 | P1[10]/ENET_RXD1 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is Ethernet receive data bit 1 (ENET_RXD1). |
| 130 | P4[30]/CS0 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is LOW-active chip select 0 signal (CS0). |
| 131 | P1[9]/ENET_RXD0 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is Ethernet receive data bit 0 (ENET_RXD0). |
| 132 | P1[8]/ENET_CRS | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is Ethernet carrier sense input ENET_CRS. |
| 133 | P1[4]/ENET_TX_EN | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is Ethernet transmit data enable ENET_TX_EN. |
| 134 | P4[31]/CS1 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is LOW-active chip select 1 signal (CS1). |
| 135 | P1[1]/ENET_TXD1 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is Ethernet transmit data bit 1 (ENET_TXD1). |
| 136 | P1[0]/ENET_TXD0 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is Ethernet transmit data bit 0 (ENET_TXD0). |
| 137 | P3[0]/D0 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory data line 0 (D0). |
| 138 | VDD(3V3) | power_in | 3.3 V supply voltage for the I/O ports. |
| 139 | VSS | power_in | Ground 0 V reference. |
| 140 | P3[1]/D1 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory data line 1 (D1). |
| 141 | P0[2]/TXD0 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is UART0 transmitter output TXD0. |
| 142 | P0[3]/RXD0 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is UART0 receiver input RXD0. |
| 143 | RTCK | bidirectional | JTAG interface control signal with a built-in pull-up resistor; LOW on this pin while RESET is LOW enables the ETM pins P2[9:0] to operate as the trace port after reset. |
| 144 | P3[2]/D2 | bidirectional | General purpose digital I/O on a 5 V tolerant pad with TTL levels and hysteresis; alternate function is external memory data line 2 (D2). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-144(20x20) |
| Category | Embedded Processors & Controllers |
| Pins | 144 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Maximum junction temperature | Tj(max) | 125 | °C | 40 | |||
| VDD(3V3) supply voltage (3.3 V) core and external rail | VDD(3V3) | 3 | 3.6 | V | 39 | ||
| VDD(DCDC)(3V3) DC-to-DC converter supply voltage (3.3 V) | VDD(DCDC)(3V3) | 3 | 3.6 | V | 39 | ||
| VDDA analog 3.3 V pad supply voltage | VDDA | -0.5 | 4.6 | V | 39 | ||
| Input voltage on pin VBAT for the RTC | Vi(VBAT) | -0.5 | 4.6 | V | 39 | ||
| Input voltage on pin VREF | Vi(VREF) | -0.5 | 4.6 | V | 39 | ||
| Analog input voltage on ADC related pins | VIA | -0.5 | 5.1 | V | 39 | ||
| Input voltage 5 V tolerant I/O pins | VI | -0.5 | 6 | V | only valid when the VDD(3V3) supply voltage is present | 39 | |
| Supply current per supply pin | IDD | 100 | mA | 39 | |||
| Ground current per ground pin | ISS | 100 | mA | 39 | |||
| Storage temperature | Tstg | -65 | 150 | °C | non-operating | 39 | |
| Total power dissipation (per package) | Ptot(pack) | 1.5 | W | based on package heat transfer, not device power consumption | 39 | ||
| Electrostatic discharge voltage, human body model, all pins | VESD | -2500 | 2500 | V | human body model; all pins | 39 | |
| VDD(3V3) supply voltage (3.3 V) core and external rail | VDD(3V3) | 3 | 3.3 | 3.6 | V | 41 | |
| VDD(DCDC)(3V3) DC-to-DC converter supply voltage (3.3 V) | VDD(DCDC)(3V3) | 3 | 3.3 | 3.6 | V | 41 | |
| VDDA analog 3.3 V pad supply voltage | VDDA | 3 | 3.3 | 3.6 | V | 41 | |
| Input voltage on pin VBAT | Vi(VBAT) | 2 | 3.3 | 3.6 | V | 41 | |
| Input voltage on pin VREF | Vi(VREF) | 2.5 | 3.3 | V | 41 | ||
| Input voltage pin configured to provide a digital function | VI | 0 | 5.5 | V | pin configured to provide a digital function | 42 | |
| HIGH-level input voltage | VIH | 2 | V | 42 | |||
| LOW-level input voltage | VIL | 0.8 | V | 42 | |||
| Hysteresis voltage | Vhys | 0.4 | V | 42 | |||
| LOW-level output voltage | VOL | 0.4 | V | IOL = 4 mA | 42 | ||
| HIGH-level output current | IOH | 4 | mA | VOH = VDD(3V3) - 0.4 V | 42 | ||
| LOW-level output current | IOL | 4 | mA | VOL = 0.4 V | 42 | ||
| HIGH-level short-circuit output current | IOHS | 45 | mA | VOH = 0 V | 42 | ||
| LOW-level short-circuit output current | IOLS | 50 | mA | VOL = VDDA | 42 | ||
| Pull-down current | Ipd | 10 | 50 | 150 | µA | VI = 5 V | 42 |
| Pull-up current | Ipu | 15 | 50 | 85 | µA | VI = 0 V | 42 |
| LOW-level input current | IIL | 3 | µA | VI = 0 V; no pull-up | 41 | ||
| HIGH-level input current | IIH | 3 | µA | VI = VDD(3V3); no pull-down | 41 | ||
| OFF-state output current | IOZ | 3 | µA | VO = 0 V; VO = VDD(3V3); no pull-up/down | 41 | ||
| I/O latch-up current | Ilatch | 100 | mA | (0.5VDD(3V3)) < VI < (1.5VDD(3V3)); Tj < 125 °C | 42 | ||
| LOW-level output voltage (I2C-bus pins P0[27] and P0[28]) | VOL | 0.4 | V | IOLS = 3 mA | 42 | ||
| Input leakage current (I2C-bus pins) | ILI | -2 | 4 | µA | VI = VDD(3V3) | 42 | |
| Input leakage current (I2C-bus pins) | ILI | 10 | 22 | µA | VI = 5 V | 42 | |
| Input voltage on pin XTAL1 | Vi(XTAL1) | -0.5 | 1.8 | 1.95 | V | 42 | |
| Output voltage on pin XTAL2 | Vo(XTAL2) | -0.5 | 1.8 | 1.95 | V | 42 | |
| Input voltage on pin RTCX1 | Vi(RTCX1) | -0.5 | 1.8 | 1.95 | V | 42 | |
| Output voltage on pin RTCX2 | Vo(RTCX2) | -0.5 | 1.8 | 1.95 | V | 43 | |
| Input voltage on pin | VIA | 0 | V | 54 | |||
| Analog input capacitance | Cia | 1 | pF | 54 | |||
| Differential linearity error | ED | 1 | LSB | VSSA = 0 V; VDDA = 3.3 V | 54 | ||
| Integral non-linearity | EL(adj) | 2 | LSB | VSSA = 0 V; VDDA = 3.3 V | 54 | ||
| Offset error | EO | 3 | LSB | VSSA = 0 V; VDDA = 3.3 V | 54 | ||
| Gain error | EG | 0.5 | % | VSSA = 0 V; VDDA = 3.3 V | 54 | ||
| Absolute error | ET | 4 | LSB | VSSA = 0 V; VDDA = 3.3 V | 54 | ||
| Voltage source interface resistance | Rvsi | 40 | kΩ | see Figure 18 | 54 | ||
| Oscillator frequency (external clock) | fosc | 1 | 25 | MHz | external clock; see Figure 12 | 48 | |
| Internal RC oscillator frequency | fosc(RC) | 3.96 | 4.02 | 4.04 | MHz | 49 | |
| Rise time (pin configured as output) | tr | 3 | 5 | ns | pin configured as output | 49 | |
| Fall time (pin configured as output) | tf | 2.5 | 5 | ns | pin configured as output | 49 | |
| Thermal resistance junction-to-ambient, JEDEC 4.5 in x 4 in, 0 m/s | Rth(j-a) | 31.5 | °C/W | JEDEC (4.5 in x 4 in); 0 m/s | 40 | ||
| Thermal resistance junction-to-ambient, JEDEC 4.5 in x 4 in, 1 m/s | Rth(j-a) | 28.1 | °C/W | JEDEC (4.5 in x 4 in); 1 m/s | 40 | ||
| Thermal resistance junction-to-ambient, JEDEC 4.5 in x 4 in, 2.5 m/s | Rth(j-a) | 26.2 | °C/W | JEDEC (4.5 in x 4 in); 2.5 m/s | 40 | ||
| Thermal resistance junction-to-ambient, single-layer 4.5 in x 3 in, 0 m/s | Rth(j-a) | 43.2 | °C/W | Single-layer (4.5 in x 3 in); 0 m/s | 40 | ||
| Thermal resistance junction-to-ambient, single-layer 4.5 in x 3 in, 1 m/s | Rth(j-a) | 35.7 | °C/W | Single-layer (4.5 in x 3 in); 1 m/s | 40 | ||
| Thermal resistance junction-to-ambient, single-layer 4.5 in x 3 in, 2.5 m/s | Rth(j-a) | 32.8 | °C/W | Single-layer (4.5 in x 3 in); 2.5 m/s | 40 | ||
| Thermal resistance junction-to-case | Rth(j-c) | 7.8 | °C/W | 40 | |||
| Thermal resistance junction-to-board | Rth(j-b) | 13.8 | °C/W | 40 |
CAD (KiCad official)
- Symbol:
LPC2388FBD144K - Footprint:
Package_QFP:LQFP-144_20x20mm_P0.5mm - 3D model: LQFP-144(20x20) (KiCad packages3D, STEP)
- 3D model files:
lpc2388fbd144k-etched.step/lpc2388fbd144k-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lpc2388fbd144k.step/lpc2388fbd144k.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (74 pp, sha256
50cc380cbd577998, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).