main
Ray Publish 0.1.0 37f94ce

LPC2134FBD64

NXP Semicon · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)

LPC2134FBD64 from NXP Semicon, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P0.21/PWM5/AD1.6/CAP1.3 bidirectional Port 0 bit 21 general-purpose I/O (5 V tolerant, TTL levels with hysteresis), with alternate functions PWM5 output, ADC1 input 6 (LPC2134/36/38 only) and Timer 1 capture input 3.
2 P0.22/AD1.7/CAP0.0/MAT0.0 bidirectional Port 0 bit 22 general-purpose I/O (5 V tolerant), with alternate functions ADC1 input 7 (LPC2134/36/38 only), Timer 0 capture input 0 and Timer 0 match output 0.
3 RTCX1 input Input to the RTC 32 kHz oscillator circuit; when unused it can be grounded or left floating, and floating gives the lowest power.
4 P1.19/TRACEPKT3 bidirectional Port 1 bit 19 standard I/O with built-in pull-up (60 k to 300 k), with alternate function trace packet bit 3 output.
5 RTCX2 output Output from the RTC oscillator circuit; this pin should be left floating.
6 VSS power_in Ground: 0 V reference.
7 VDDA power_in Analog 3.3 V power supply, nominally the same as VDD but isolated to minimize noise and error; it powers the on-chip PLL.
8 P1.18/TRACEPKT2 bidirectional Port 1 bit 18 standard I/O with built-in pull-up (60 k to 300 k), with alternate function trace packet bit 2 output.
9 P0.25/AD0.4/AOUT bidirectional Port 0 bit 25 I/O (5 V tolerant) with ADC0 input 4 and DAC output AOUT; the digital section is disabled when the pin is used as DAC output.
10 P0.26/AD0.5 bidirectional Port 0 bit 26 I/O (5 V tolerant) with ADC0 input 5 analog function; the digital section is disabled when configured as an ADC input.
11 P0.27/AD0.0/CAP0.1/MAT0.1 bidirectional Port 0 bit 27 I/O (5 V tolerant) with ADC0 input 0, Timer 0 capture input 1 and Timer 0 match output 1.
12 P1.17/TRACEPKT1 bidirectional Port 1 bit 17 standard I/O with built-in pull-up (60 k to 300 k), with alternate function trace packet bit 1 output.
13 P0.28/AD0.1/CAP0.2/MAT0.2 bidirectional Port 0 bit 28 I/O (5 V tolerant) with ADC0 input 1, Timer 0 capture input 2 and Timer 0 match output 2.
14 P0.29/AD0.2/CAP0.3/MAT0.3 bidirectional Port 0 bit 29 I/O (5 V tolerant) with ADC0 input 2, Timer 0 capture input 3 and Timer 0 match output 3.
15 P0.30/AD0.3/EINT3/CAP0.0 bidirectional Port 0 bit 30 I/O (5 V tolerant) with ADC0 input 3, external interrupt 3 input and Timer 0 capture input 0.
16 P1.16/TRACEPKT0 bidirectional Port 1 bit 16 standard I/O with built-in pull-up (60 k to 300 k), with alternate function trace packet bit 0 output.
17 P0.31 output General-purpose digital output-only pin; it MUST NOT be externally pulled LOW while RESET is LOW, or the JTAG port will be disabled.
18 VSS power_in Ground: 0 V reference.
19 P0.0/TXD0/PWM1 bidirectional Port 0 bit 0 I/O (5 V tolerant, TTL levels, 10 ns slew rate control), with alternate functions UART0 transmitter output TXD0 and PWM1 output.
20 P1.31/TRST input JTAG Test Reset input (TRST) on a 5 V tolerant port pin with built-in pull-up (60 k to 300 k).
21 P0.1/RXD0/PWM3/EINT0 bidirectional Port 0 bit 1 I/O (5 V tolerant) with UART0 receiver input RXD0, PWM3 output and external interrupt 0; a glitch filter blocks input pulses shorter than 3 ns.
22 P0.2/SCL0/CAP0.0 bidirectional Open-drain 5 V tolerant I2C-bus 400 kHz compatible pad that requires an external pull-up for output, carrying I2C0 clock SCL0 and Timer 0 capture input 0.
23 VDD power_in 3.3 V power supply for the core and I/O ports (3.0 V to 3.6 V).
24 P1.26/RTCK bidirectional Returned Test Clock (RTCK) for JTAG with built-in pull-up; LOW on RTCK while RESET is LOW enables pins P1.31:26 to operate as the debug port after reset.
25 VSS power_in Ground: 0 V reference.
26 P0.3/SDA0/MAT0.0/EINT1 bidirectional Open-drain 5 V tolerant I2C-bus 400 kHz compatible pad that requires an external pull-up for output, carrying I2C0 data SDA0, Timer 0 match output 0 and external interrupt 1.
27 P0.4/SCK0/CAP0.1/AD0.6 bidirectional Port 0 bit 4 I/O (5 V tolerant) with SPI0 clock SCK0, Timer 0 capture input 1 and ADC0 input 6, which is always connected to its pin.
28 P1.25/EXTIN0 bidirectional Port 1 bit 25 standard I/O with built-in pull-up (60 k to 300 k), with alternate function external trigger input EXTIN0.
29 P0.5/MISO0/MAT0.1/AD0.7 bidirectional Port 0 bit 5 I/O (5 V tolerant) with SPI0 data input to master or output from slave MISO0, Timer 0 match output 1 and ADC0 input 7, which is always connected to its pin.
30 P0.6/MOSI0/CAP0.2/AD1.0 bidirectional Port 0 bit 6 I/O (5 V tolerant) with SPI0 data output from master or input to slave MOSI0, Timer 0 capture input 2 and ADC1 input 0 (LPC2134/36/38 only).
31 P0.7/SSEL0/PWM2/EINT2 bidirectional Port 0 bit 7 I/O (5 V tolerant, 10 ns slew rate control) with SPI0 slave select SSEL0, PWM2 output and external interrupt 2 input.
32 P1.24/TRACECLK bidirectional Port 1 bit 24 standard I/O with built-in pull-up (60 k to 300 k), with alternate function trace clock output TRACECLK.
33 P0.8/TXD1/PWM4/AD1.1 bidirectional Port 0 bit 8 I/O (5 V tolerant) with UART1 transmitter output TXD1, PWM4 output and ADC1 input 1 (LPC2134/36/38 only).
34 P0.9/RXD1/PWM6/EINT3 bidirectional Port 0 bit 9 I/O (5 V tolerant) with UART1 receiver input RXD1, PWM6 output and external interrupt 3 input; a glitch filter blocks input pulses shorter than 3 ns.
35 P0.10/RTS1/CAP1.0/AD1.2 bidirectional Port 0 bit 10 I/O (5 V tolerant) with UART1 request-to-send output RTS1 (LPC2134/36/38), Timer 1 capture input 0 and ADC1 input 2 (LPC2134/36/38).
36 P1.23/PIPESTAT2 bidirectional Port 1 bit 23 standard I/O with built-in pull-up (60 k to 300 k), with alternate function pipeline status bit 2 output.
37 P0.11/CTS1/CAP1.1/SCL1 bidirectional Open-drain 5 V tolerant I2C-bus compatible pad that requires an external pull-up for output, carrying I2C1 clock SCL1, with UART1 clear-to-send input CTS1 (LPC2134/36/38) and Timer 1 capture input 1.
38 P0.12/DSR1/MAT1.0/AD1.3 bidirectional Port 0 bit 12 I/O (5 V tolerant) with UART1 data-set-ready input DSR1 (LPC2134/36/38), Timer 1 match output 0 and ADC1 input 3 (LPC2134/36/38).
39 P0.13/DTR1/MAT1.1/AD1.4 bidirectional Port 0 bit 13 I/O (5 V tolerant) with UART1 data-terminal-ready output DTR1 (LPC2134/36/38), Timer 1 match output 1 and ADC1 input 4 (LPC2134/36/38).
40 P1.22/PIPESTAT1 bidirectional Port 1 bit 22 standard I/O with built-in pull-up (60 k to 300 k), with alternate function pipeline status bit 1 output.
41 P0.14/DCD1/EINT1/SDA1 bidirectional Open-drain 5 V tolerant I2C-bus compatible pad that requires an external pull-up for output, carrying I2C1 data SDA1, external interrupt 1 and UART1 data-carrier-detect input DCD1 (LPC2134/36/38).
42 VSS power_in Ground: 0 V reference.
43 VDD power_in 3.3 V power supply for the core and I/O ports (3.0 V to 3.6 V).
44 P1.21/PIPESTAT0 bidirectional Port 1 bit 21 standard I/O with built-in pull-up (60 k to 300 k), with alternate function pipeline status bit 0 output.
45 P0.15/RI1/EINT2/AD1.5 bidirectional Port 0 bit 15 I/O (5 V tolerant) with UART1 ring-indicator input RI1 (LPC2134/36/38), external interrupt 2 input and ADC1 input 5 (LPC2134/36/38).
46 P0.16/EINT0/MAT0.2/CAP0.2 bidirectional Port 0 bit 16 I/O (5 V tolerant) with external interrupt 0 input, Timer 0 match output 2 and Timer 0 capture input 2; a glitch filter blocks input pulses shorter than 3 ns.
47 P0.17/CAP1.2/SCK1/MAT1.2 bidirectional Port 0 bit 17 I/O (5 V tolerant, 10 ns slew rate control) with Timer 1 capture input 2, SSP clock SCK1 and Timer 1 match output 2.
48 P1.20/TRACESYNC bidirectional Port 1 bit 20 standard I/O with built-in pull-up (60 k to 300 k); LOW on TRACESYNC while RESET is LOW enables pins P1.25:16 to operate as the trace port after reset.
49 VBAT power_in RTC power supply: 3.3 V on this pin supplies power to the RTC (2.0 V to 3.6 V); the RTC typically fails below 1.6 V.
50 VSS power_in Ground: 0 V reference.
51 VDD power_in 3.3 V power supply for the core and I/O ports (3.0 V to 3.6 V).
52 P1.30/TMS input JTAG Test Mode Select input (TMS) on a 5 V tolerant port pin with built-in pull-up (60 k to 300 k).
53 P0.18/CAP1.3/MISO1/MAT1.3 bidirectional Port 0 bit 18 I/O (5 V tolerant) with Timer 1 capture input 3, SSP data output from slave MISO1 and Timer 1 match output 3.
54 P0.19/MAT1.2/MOSI1/CAP1.2 bidirectional Port 0 bit 19 I/O (5 V tolerant) with Timer 1 match output 2, SSP data input to slave MOSI1 and Timer 1 capture input 2.
55 P0.20/MAT1.3/SSEL1/EINT3 bidirectional Port 0 bit 20 I/O (5 V tolerant) with Timer 1 match output 3, SSP slave select SSEL1 and external interrupt 3 input.
56 P1.29/TCK input JTAG Test Clock input (TCK) on a 5 V tolerant port pin with built-in pull-up (60 k to 300 k).
57 RESET input External reset input: a LOW on this pin resets the device and processor execution begins at address 0; Schmitt-trigger input with glitch filter, TTL with hysteresis, 5 V tolerant.
58 P0.23 bidirectional General-purpose digital I/O pin (5 V tolerant, TTL levels with hysteresis, 10 ns slew rate control).
59 VSSA power_in Analog ground: 0 V reference, nominally the same as VSS but isolated to minimize noise and error.
60 P1.28/TDI input JTAG Test Data input (TDI) on a 5 V tolerant port pin with built-in pull-up (60 k to 300 k).
61 XTAL2 output Output from the oscillator amplifier; its output voltage is limited to 1.8 V to 1.95 V range per the static characteristics.
62 XTAL1 input Input to the oscillator circuit and internal clock generator circuits; the input voltage is limited to 1.8 V.
63 VREF power_in ADC/DAC reference voltage: nominally the same as VDD (2.5 V to 3.6 V) but isolated to minimize noise and error, and used as the reference for the A/D and D/A converters.
64 P1.27/TDO output JTAG Test Data output (TDO) on a 5 V tolerant port pin with built-in pull-up (60 k to 300 k).

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package LQFP-64(10x10)
Category Embedded Processors & Controllers
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD supply voltage (core and external rail) VDD -0.5 3.6 V 26
VDDA analog 3.3 V pad supply voltage VDDA -0.5 4.6 V 26
input voltage on pin VBAT for the RTC Vi(VBAT) -0.5 4.6 V 26
input voltage on pin VREF Vi(VREF) -0.5 4.6 V 26
analog input voltage on ADC related pins VIA -0.5 5.1 V 26
input voltage 5 V tolerant I/O pins VI -0.5 6 V only valid when the VDD supply voltage is present 26
input voltage other I/O pins VI -0.5 V other I/O pins 26
IDD supply current per supply pin IDD -100 mA 26
ISS ground current per ground pin ISS -100 mA 26
sink current for I2C-bus Isink 20 mA DC; T = 85 C 26
storage temperature Tstg -40 125 °C 26
total power dissipation (per package) Ptot(pack) 1.5 W based on package heat transfer, not device power consumption 26
electrostatic discharge voltage, all pins VESD -4000 4000 V human body model 26
VDD supply voltage (core and external rail) VDD 3 3.3 3.6 V 27
VDDA analog 3.3 V pad supply voltage VDDA 2.5 3.3 3.6 V 27
input voltage on pin VBAT Vi(VBAT) 2 3.3 3.6 V 27
input voltage on pin VREF Vi(VREF) 2.5 3.3 3.6 V 27
LOW-level input current IIL 3 µA VI = 0 V; no pull-up 27
HIGH-level input current IIH 3 µA VI =VDD; no-pull-down 27
OFF-state output current IOZ -3 µA VO = 0 V; VO =VDD; no pull-up/down 27
I/O latch-up current Ilatch 100 mA (0.5VDD) < VI < (1.5VDD); Tj < 125 C 27
input voltage pin configured to provide a digital function VI 0 5.5 V pin configured to provide a digital function 27
output voltage VO 0 V output active 27
HIGH-level input voltage VIH 2 V 27
LOW-level input voltage VIL 0.8 V 27
hysteresis voltage Vhys 0.4 V 27
LOW-level output voltage VOL 0.4 V IOL = 4 mA 27
HIGH-level output current IOH 4 mA VOH =VDD - 0.4 V 27
LOW-level output current IOL 4 mA VOL = 0.4 V 27
HIGH-level short-circuit output current IOHS 45 mA VOH = 0 V 27
LOW-level short-circuit output current IOLS 50 mA VOL =VDDA 27
pull-down current Ipd 10 50 150 µA VI =5V 27
pull-up current Ipu 15 50 85 µA VI = 0 V 27
Power-down mode supply current IDD(pd) 200 500 µA VDD = 3.3 V; Tamb = 85 C 27
LOW-level output voltage (I2C-bus pins) VOL 0.4 V IOLS = 3 mA 28
input leakage current (I2C-bus pins) ILI 24 µA VI =VDD 28
input leakage current (I2C-bus pins) ILI -10 22 µA VI =5V 28
input voltage on pin XTAL1 Vi(XTAL1) -0.5 1.8 1.95 V 28
output voltage on pin XTAL2 Vo(XTAL2) -0.5 1.8 1.95 V 28
input voltage on pin RTCX1 Vi(RTCX1) -0.5 1.8 1.95 V 28
output voltage on pin RTCX2 Vo(RTCX2) -0.5 1.8 1.95 V 28
oscillator frequency fosc 10 25 MHz 29
clock cycle time Tcy(clk) 40 100 ns 29
clock rise time tCLCH 5 ns 29
clock fall time tCHCL 5 ns 29
analog input voltage VIA 0 V 32
analog input capacitance Cia 1 pF 32
differential linearity error ED 1 LSB 32
integral non-linearity EL(adj) 2 LSB 32
offset error EO 3 LSB 32
gain error EG 0.5 % 32
absolute error ET 4 LSB 32
voltage source interface resistance Rvsi 40 kΩ 32
load resistance RL 1 kΩ 35

CAD (KiCad official)

  • Symbol: LPC2134FBD64
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: lpc2134fbd64-01-etched.step / lpc2134fbd64-01-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lpc2134fbd64-01.step / lpc2134fbd64-01.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (45 pp, sha256 b9ad6ab6361207ea, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF