Generated by kicad-footprint-generator · KiCad file format 20260206
LPC2134FBD64
NXP Semicon · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)
LPC2134FBD64 from NXP Semicon, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P0.21/PWM5/AD1.6/CAP1.3 | bidirectional | Port 0 bit 21 general-purpose I/O (5 V tolerant, TTL levels with hysteresis), with alternate functions PWM5 output, ADC1 input 6 (LPC2134/36/38 only) and Timer 1 capture input 3. |
| 2 | P0.22/AD1.7/CAP0.0/MAT0.0 | bidirectional | Port 0 bit 22 general-purpose I/O (5 V tolerant), with alternate functions ADC1 input 7 (LPC2134/36/38 only), Timer 0 capture input 0 and Timer 0 match output 0. |
| 3 | RTCX1 | input | Input to the RTC 32 kHz oscillator circuit; when unused it can be grounded or left floating, and floating gives the lowest power. |
| 4 | P1.19/TRACEPKT3 | bidirectional | Port 1 bit 19 standard I/O with built-in pull-up (60 k to 300 k), with alternate function trace packet bit 3 output. |
| 5 | RTCX2 | output | Output from the RTC oscillator circuit; this pin should be left floating. |
| 6 | VSS | power_in | Ground: 0 V reference. |
| 7 | VDDA | power_in | Analog 3.3 V power supply, nominally the same as VDD but isolated to minimize noise and error; it powers the on-chip PLL. |
| 8 | P1.18/TRACEPKT2 | bidirectional | Port 1 bit 18 standard I/O with built-in pull-up (60 k to 300 k), with alternate function trace packet bit 2 output. |
| 9 | P0.25/AD0.4/AOUT | bidirectional | Port 0 bit 25 I/O (5 V tolerant) with ADC0 input 4 and DAC output AOUT; the digital section is disabled when the pin is used as DAC output. |
| 10 | P0.26/AD0.5 | bidirectional | Port 0 bit 26 I/O (5 V tolerant) with ADC0 input 5 analog function; the digital section is disabled when configured as an ADC input. |
| 11 | P0.27/AD0.0/CAP0.1/MAT0.1 | bidirectional | Port 0 bit 27 I/O (5 V tolerant) with ADC0 input 0, Timer 0 capture input 1 and Timer 0 match output 1. |
| 12 | P1.17/TRACEPKT1 | bidirectional | Port 1 bit 17 standard I/O with built-in pull-up (60 k to 300 k), with alternate function trace packet bit 1 output. |
| 13 | P0.28/AD0.1/CAP0.2/MAT0.2 | bidirectional | Port 0 bit 28 I/O (5 V tolerant) with ADC0 input 1, Timer 0 capture input 2 and Timer 0 match output 2. |
| 14 | P0.29/AD0.2/CAP0.3/MAT0.3 | bidirectional | Port 0 bit 29 I/O (5 V tolerant) with ADC0 input 2, Timer 0 capture input 3 and Timer 0 match output 3. |
| 15 | P0.30/AD0.3/EINT3/CAP0.0 | bidirectional | Port 0 bit 30 I/O (5 V tolerant) with ADC0 input 3, external interrupt 3 input and Timer 0 capture input 0. |
| 16 | P1.16/TRACEPKT0 | bidirectional | Port 1 bit 16 standard I/O with built-in pull-up (60 k to 300 k), with alternate function trace packet bit 0 output. |
| 17 | P0.31 | output | General-purpose digital output-only pin; it MUST NOT be externally pulled LOW while RESET is LOW, or the JTAG port will be disabled. |
| 18 | VSS | power_in | Ground: 0 V reference. |
| 19 | P0.0/TXD0/PWM1 | bidirectional | Port 0 bit 0 I/O (5 V tolerant, TTL levels, 10 ns slew rate control), with alternate functions UART0 transmitter output TXD0 and PWM1 output. |
| 20 | P1.31/TRST | input | JTAG Test Reset input (TRST) on a 5 V tolerant port pin with built-in pull-up (60 k to 300 k). |
| 21 | P0.1/RXD0/PWM3/EINT0 | bidirectional | Port 0 bit 1 I/O (5 V tolerant) with UART0 receiver input RXD0, PWM3 output and external interrupt 0; a glitch filter blocks input pulses shorter than 3 ns. |
| 22 | P0.2/SCL0/CAP0.0 | bidirectional | Open-drain 5 V tolerant I2C-bus 400 kHz compatible pad that requires an external pull-up for output, carrying I2C0 clock SCL0 and Timer 0 capture input 0. |
| 23 | VDD | power_in | 3.3 V power supply for the core and I/O ports (3.0 V to 3.6 V). |
| 24 | P1.26/RTCK | bidirectional | Returned Test Clock (RTCK) for JTAG with built-in pull-up; LOW on RTCK while RESET is LOW enables pins P1.31:26 to operate as the debug port after reset. |
| 25 | VSS | power_in | Ground: 0 V reference. |
| 26 | P0.3/SDA0/MAT0.0/EINT1 | bidirectional | Open-drain 5 V tolerant I2C-bus 400 kHz compatible pad that requires an external pull-up for output, carrying I2C0 data SDA0, Timer 0 match output 0 and external interrupt 1. |
| 27 | P0.4/SCK0/CAP0.1/AD0.6 | bidirectional | Port 0 bit 4 I/O (5 V tolerant) with SPI0 clock SCK0, Timer 0 capture input 1 and ADC0 input 6, which is always connected to its pin. |
| 28 | P1.25/EXTIN0 | bidirectional | Port 1 bit 25 standard I/O with built-in pull-up (60 k to 300 k), with alternate function external trigger input EXTIN0. |
| 29 | P0.5/MISO0/MAT0.1/AD0.7 | bidirectional | Port 0 bit 5 I/O (5 V tolerant) with SPI0 data input to master or output from slave MISO0, Timer 0 match output 1 and ADC0 input 7, which is always connected to its pin. |
| 30 | P0.6/MOSI0/CAP0.2/AD1.0 | bidirectional | Port 0 bit 6 I/O (5 V tolerant) with SPI0 data output from master or input to slave MOSI0, Timer 0 capture input 2 and ADC1 input 0 (LPC2134/36/38 only). |
| 31 | P0.7/SSEL0/PWM2/EINT2 | bidirectional | Port 0 bit 7 I/O (5 V tolerant, 10 ns slew rate control) with SPI0 slave select SSEL0, PWM2 output and external interrupt 2 input. |
| 32 | P1.24/TRACECLK | bidirectional | Port 1 bit 24 standard I/O with built-in pull-up (60 k to 300 k), with alternate function trace clock output TRACECLK. |
| 33 | P0.8/TXD1/PWM4/AD1.1 | bidirectional | Port 0 bit 8 I/O (5 V tolerant) with UART1 transmitter output TXD1, PWM4 output and ADC1 input 1 (LPC2134/36/38 only). |
| 34 | P0.9/RXD1/PWM6/EINT3 | bidirectional | Port 0 bit 9 I/O (5 V tolerant) with UART1 receiver input RXD1, PWM6 output and external interrupt 3 input; a glitch filter blocks input pulses shorter than 3 ns. |
| 35 | P0.10/RTS1/CAP1.0/AD1.2 | bidirectional | Port 0 bit 10 I/O (5 V tolerant) with UART1 request-to-send output RTS1 (LPC2134/36/38), Timer 1 capture input 0 and ADC1 input 2 (LPC2134/36/38). |
| 36 | P1.23/PIPESTAT2 | bidirectional | Port 1 bit 23 standard I/O with built-in pull-up (60 k to 300 k), with alternate function pipeline status bit 2 output. |
| 37 | P0.11/CTS1/CAP1.1/SCL1 | bidirectional | Open-drain 5 V tolerant I2C-bus compatible pad that requires an external pull-up for output, carrying I2C1 clock SCL1, with UART1 clear-to-send input CTS1 (LPC2134/36/38) and Timer 1 capture input 1. |
| 38 | P0.12/DSR1/MAT1.0/AD1.3 | bidirectional | Port 0 bit 12 I/O (5 V tolerant) with UART1 data-set-ready input DSR1 (LPC2134/36/38), Timer 1 match output 0 and ADC1 input 3 (LPC2134/36/38). |
| 39 | P0.13/DTR1/MAT1.1/AD1.4 | bidirectional | Port 0 bit 13 I/O (5 V tolerant) with UART1 data-terminal-ready output DTR1 (LPC2134/36/38), Timer 1 match output 1 and ADC1 input 4 (LPC2134/36/38). |
| 40 | P1.22/PIPESTAT1 | bidirectional | Port 1 bit 22 standard I/O with built-in pull-up (60 k to 300 k), with alternate function pipeline status bit 1 output. |
| 41 | P0.14/DCD1/EINT1/SDA1 | bidirectional | Open-drain 5 V tolerant I2C-bus compatible pad that requires an external pull-up for output, carrying I2C1 data SDA1, external interrupt 1 and UART1 data-carrier-detect input DCD1 (LPC2134/36/38). |
| 42 | VSS | power_in | Ground: 0 V reference. |
| 43 | VDD | power_in | 3.3 V power supply for the core and I/O ports (3.0 V to 3.6 V). |
| 44 | P1.21/PIPESTAT0 | bidirectional | Port 1 bit 21 standard I/O with built-in pull-up (60 k to 300 k), with alternate function pipeline status bit 0 output. |
| 45 | P0.15/RI1/EINT2/AD1.5 | bidirectional | Port 0 bit 15 I/O (5 V tolerant) with UART1 ring-indicator input RI1 (LPC2134/36/38), external interrupt 2 input and ADC1 input 5 (LPC2134/36/38). |
| 46 | P0.16/EINT0/MAT0.2/CAP0.2 | bidirectional | Port 0 bit 16 I/O (5 V tolerant) with external interrupt 0 input, Timer 0 match output 2 and Timer 0 capture input 2; a glitch filter blocks input pulses shorter than 3 ns. |
| 47 | P0.17/CAP1.2/SCK1/MAT1.2 | bidirectional | Port 0 bit 17 I/O (5 V tolerant, 10 ns slew rate control) with Timer 1 capture input 2, SSP clock SCK1 and Timer 1 match output 2. |
| 48 | P1.20/TRACESYNC | bidirectional | Port 1 bit 20 standard I/O with built-in pull-up (60 k to 300 k); LOW on TRACESYNC while RESET is LOW enables pins P1.25:16 to operate as the trace port after reset. |
| 49 | VBAT | power_in | RTC power supply: 3.3 V on this pin supplies power to the RTC (2.0 V to 3.6 V); the RTC typically fails below 1.6 V. |
| 50 | VSS | power_in | Ground: 0 V reference. |
| 51 | VDD | power_in | 3.3 V power supply for the core and I/O ports (3.0 V to 3.6 V). |
| 52 | P1.30/TMS | input | JTAG Test Mode Select input (TMS) on a 5 V tolerant port pin with built-in pull-up (60 k to 300 k). |
| 53 | P0.18/CAP1.3/MISO1/MAT1.3 | bidirectional | Port 0 bit 18 I/O (5 V tolerant) with Timer 1 capture input 3, SSP data output from slave MISO1 and Timer 1 match output 3. |
| 54 | P0.19/MAT1.2/MOSI1/CAP1.2 | bidirectional | Port 0 bit 19 I/O (5 V tolerant) with Timer 1 match output 2, SSP data input to slave MOSI1 and Timer 1 capture input 2. |
| 55 | P0.20/MAT1.3/SSEL1/EINT3 | bidirectional | Port 0 bit 20 I/O (5 V tolerant) with Timer 1 match output 3, SSP slave select SSEL1 and external interrupt 3 input. |
| 56 | P1.29/TCK | input | JTAG Test Clock input (TCK) on a 5 V tolerant port pin with built-in pull-up (60 k to 300 k). |
| 57 | RESET | input | External reset input: a LOW on this pin resets the device and processor execution begins at address 0; Schmitt-trigger input with glitch filter, TTL with hysteresis, 5 V tolerant. |
| 58 | P0.23 | bidirectional | General-purpose digital I/O pin (5 V tolerant, TTL levels with hysteresis, 10 ns slew rate control). |
| 59 | VSSA | power_in | Analog ground: 0 V reference, nominally the same as VSS but isolated to minimize noise and error. |
| 60 | P1.28/TDI | input | JTAG Test Data input (TDI) on a 5 V tolerant port pin with built-in pull-up (60 k to 300 k). |
| 61 | XTAL2 | output | Output from the oscillator amplifier; its output voltage is limited to 1.8 V to 1.95 V range per the static characteristics. |
| 62 | XTAL1 | input | Input to the oscillator circuit and internal clock generator circuits; the input voltage is limited to 1.8 V. |
| 63 | VREF | power_in | ADC/DAC reference voltage: nominally the same as VDD (2.5 V to 3.6 V) but isolated to minimize noise and error, and used as the reference for the A/D and D/A converters. |
| 64 | P1.27/TDO | output | JTAG Test Data output (TDO) on a 5 V tolerant port pin with built-in pull-up (60 k to 300 k). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD supply voltage (core and external rail) | VDD | -0.5 | 3.6 | V | 26 | ||
| VDDA analog 3.3 V pad supply voltage | VDDA | -0.5 | 4.6 | V | 26 | ||
| input voltage on pin VBAT for the RTC | Vi(VBAT) | -0.5 | 4.6 | V | 26 | ||
| input voltage on pin VREF | Vi(VREF) | -0.5 | 4.6 | V | 26 | ||
| analog input voltage on ADC related pins | VIA | -0.5 | 5.1 | V | 26 | ||
| input voltage 5 V tolerant I/O pins | VI | -0.5 | 6 | V | only valid when the VDD supply voltage is present | 26 | |
| input voltage other I/O pins | VI | -0.5 | V | other I/O pins | 26 | ||
| IDD supply current per supply pin | IDD | -100 | mA | 26 | |||
| ISS ground current per ground pin | ISS | -100 | mA | 26 | |||
| sink current for I2C-bus | Isink | 20 | mA | DC; T = 85 C | 26 | ||
| storage temperature | Tstg | -40 | 125 | °C | 26 | ||
| total power dissipation (per package) | Ptot(pack) | 1.5 | W | based on package heat transfer, not device power consumption | 26 | ||
| electrostatic discharge voltage, all pins | VESD | -4000 | 4000 | V | human body model | 26 | |
| VDD supply voltage (core and external rail) | VDD | 3 | 3.3 | 3.6 | V | 27 | |
| VDDA analog 3.3 V pad supply voltage | VDDA | 2.5 | 3.3 | 3.6 | V | 27 | |
| input voltage on pin VBAT | Vi(VBAT) | 2 | 3.3 | 3.6 | V | 27 | |
| input voltage on pin VREF | Vi(VREF) | 2.5 | 3.3 | 3.6 | V | 27 | |
| LOW-level input current | IIL | 3 | µA | VI = 0 V; no pull-up | 27 | ||
| HIGH-level input current | IIH | 3 | µA | VI =VDD; no-pull-down | 27 | ||
| OFF-state output current | IOZ | -3 | µA | VO = 0 V; VO =VDD; no pull-up/down | 27 | ||
| I/O latch-up current | Ilatch | 100 | mA | (0.5VDD) < VI < (1.5VDD); Tj < 125 C | 27 | ||
| input voltage pin configured to provide a digital function | VI | 0 | 5.5 | V | pin configured to provide a digital function | 27 | |
| output voltage | VO | 0 | V | output active | 27 | ||
| HIGH-level input voltage | VIH | 2 | V | 27 | |||
| LOW-level input voltage | VIL | 0.8 | V | 27 | |||
| hysteresis voltage | Vhys | 0.4 | V | 27 | |||
| LOW-level output voltage | VOL | 0.4 | V | IOL = 4 mA | 27 | ||
| HIGH-level output current | IOH | 4 | mA | VOH =VDD - 0.4 V | 27 | ||
| LOW-level output current | IOL | 4 | mA | VOL = 0.4 V | 27 | ||
| HIGH-level short-circuit output current | IOHS | 45 | mA | VOH = 0 V | 27 | ||
| LOW-level short-circuit output current | IOLS | 50 | mA | VOL =VDDA | 27 | ||
| pull-down current | Ipd | 10 | 50 | 150 | µA | VI =5V | 27 |
| pull-up current | Ipu | 15 | 50 | 85 | µA | VI = 0 V | 27 |
| Power-down mode supply current | IDD(pd) | 200 | 500 | µA | VDD = 3.3 V; Tamb = 85 C | 27 | |
| LOW-level output voltage (I2C-bus pins) | VOL | 0.4 | V | IOLS = 3 mA | 28 | ||
| input leakage current (I2C-bus pins) | ILI | 24 | µA | VI =VDD | 28 | ||
| input leakage current (I2C-bus pins) | ILI | -10 | 22 | µA | VI =5V | 28 | |
| input voltage on pin XTAL1 | Vi(XTAL1) | -0.5 | 1.8 | 1.95 | V | 28 | |
| output voltage on pin XTAL2 | Vo(XTAL2) | -0.5 | 1.8 | 1.95 | V | 28 | |
| input voltage on pin RTCX1 | Vi(RTCX1) | -0.5 | 1.8 | 1.95 | V | 28 | |
| output voltage on pin RTCX2 | Vo(RTCX2) | -0.5 | 1.8 | 1.95 | V | 28 | |
| oscillator frequency | fosc | 10 | 25 | MHz | 29 | ||
| clock cycle time | Tcy(clk) | 40 | 100 | ns | 29 | ||
| clock rise time | tCLCH | 5 | ns | 29 | |||
| clock fall time | tCHCL | 5 | ns | 29 | |||
| analog input voltage | VIA | 0 | V | 32 | |||
| analog input capacitance | Cia | 1 | pF | 32 | |||
| differential linearity error | ED | 1 | LSB | 32 | |||
| integral non-linearity | EL(adj) | 2 | LSB | 32 | |||
| offset error | EO | 3 | LSB | 32 | |||
| gain error | EG | 0.5 | % | 32 | |||
| absolute error | ET | 4 | LSB | 32 | |||
| voltage source interface resistance | Rvsi | 40 | kΩ | 32 | |||
| load resistance | RL | 1 | kΩ | 35 |
CAD (KiCad official)
- Symbol:
LPC2134FBD64 - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
lpc2134fbd64-01-etched.step/lpc2134fbd64-01-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lpc2134fbd64-01.step/lpc2134fbd64-01.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (45 pp, sha256
b9ad6ab6361207ea, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).