component
LPC2131FBD64/01
Public Made by Adomby adom
NXP Semicon Microcontroller Units (MCUs/MPUs/SOCs), LQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
2a0ecc5
LPC2131FBD64
NXP Semicon · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-64(10x10)
LPC2131FBD64 from NXP Semicon, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P0.21/PWM5/CAP1.3 | bidirectional | Port 0 bit 21 general-purpose 5 V tolerant I/O (TTL levels, hysteresis, 10 ns slew rate control), with PWM5 output and Timer 1 capture input CAP1.3. |
| 2 | P0.22/CAP0.0/MAT0.0 | bidirectional | Port 0 bit 22 general-purpose 5 V tolerant I/O (TTL levels, hysteresis), with Timer 0 capture input CAP0.0 and match output MAT0.0. |
| 3 | RTCX1 | input | Input to the RTC 32 kHz oscillator circuit; may be grounded or left floating when unused, and left floating for lowest power. |
| 4 | P1.19/TRACEPKT3 | bidirectional | Port 1 bit 19 standard I/O with internal pull-up (60 kΩ to 300 kΩ), with trace packet bit 3 output TRACEPKT3. |
| 5 | RTCX2 | output | Output from the RTC oscillator circuit; should be left floating. |
| 6 | VSS | power_in | Ground reference, 0 V. |
| 7 | VDDA | power_in | Analog 3.3 V supply, nominally equal to VDD but isolated to minimize noise; powers the on-chip PLL. |
| 8 | P1.18/TRACEPKT2 | bidirectional | Port 1 bit 18 standard I/O with internal pull-up (60 kΩ to 300 kΩ), with trace packet bit 2 output TRACEPKT2. |
| 9 | P0.25/AD0.4 | bidirectional | Port 0 bit 25 5 V tolerant I/O, with ADC 0 analog input AD0.4 (DAC output AOUT is not available on LPC2131). |
| 10 | P0.26/AD0.5 | bidirectional | Port 0 bit 26 5 V tolerant I/O (TTL levels, hysteresis), with ADC 0 analog input AD0.5 that is always connected to its pin. |
| 11 | P0.27/AD0.0/CAP0.1/MAT0.1 | bidirectional | Port 0 bit 27 5 V tolerant I/O, with ADC 0 analog input AD0.0, Timer 0 capture input CAP0.1 and match output MAT0.1. |
| 12 | P1.17/TRACEPKT1 | bidirectional | Port 1 bit 17 standard I/O with internal pull-up (60 kΩ to 300 kΩ), with trace packet bit 1 output TRACEPKT1. |
| 13 | P0.28/AD0.1/CAP0.2/MAT0.2 | bidirectional | Port 0 bit 28 5 V tolerant I/O, with ADC 0 analog input AD0.1, Timer 0 capture input CAP0.2 and match output MAT0.2. |
| 14 | P0.29/AD0.2/CAP0.3/MAT0.3 | bidirectional | Port 0 bit 29 5 V tolerant I/O, with ADC 0 analog input AD0.2, Timer 0 capture input CAP0.3 and match output MAT0.3. |
| 15 | P0.30/AD0.3/EINT3/CAP0.0 | bidirectional | Port 0 bit 30 5 V tolerant I/O, with ADC 0 analog input AD0.3, external interrupt 3 input EINT3 and Timer 0 capture input CAP0.0. |
| 16 | P1.16/TRACEPKT0 | bidirectional | Port 1 bit 16 standard I/O with internal pull-up (60 kΩ to 300 kΩ), with trace packet bit 0 output TRACEPKT0. |
| 17 | P0.31 | output | General-purpose digital output-only pin; must not be pulled LOW externally while RESET is LOW or the JTAG port will be disabled. |
| 18 | VSS | power_in | Ground reference, 0 V. |
| 19 | P0.0/TXD0/PWM1 | bidirectional | Port 0 bit 0 5 V tolerant I/O, with UART0 transmitter output TXD0 and PWM1 output. |
| 20 | P1.31/TRST | bidirectional | Port 1 bit 31 I/O pin with JTAG Test Reset input TRST; 5 V tolerant I/O. |
| 21 | P0.1/RXD0/PWM3/EINT0 | bidirectional | Port 0 bit 1 5 V tolerant I/O with glitch filter (pulses shorter than 3 ns blocked on input), with UART0 receiver input RXD0, PWM3 output and external interrupt 0 input EINT0. |
| 22 | P0.2/SCL0/CAP0.0 | bidirectional | Port 0 bit 2 open-drain 5 V tolerant I/O compliant with I2C-bus 400 kHz; requires external pull-up for output function, with I2C0 clock SCL0 and Timer 0 capture input CAP0.0. |
| 23 | VDD | power_in | 3.3 V power supply for the core and I/O ports (3.0 V to 3.6 V). |
| 24 | P1.26/RTCK | bidirectional | Port 1 bit 26 I/O with internal pull-up, with JTAG Returned Test Clock output RTCK; LOW on RTCK while RESET is LOW enables P1.31:26 as debug port. |
| 25 | VSS | power_in | Ground reference, 0 V. |
| 26 | P0.3/SDA0/MAT0.0/EINT1 | bidirectional | Port 0 bit 3 open-drain 5 V tolerant I/O compliant with I2C-bus 400 kHz; requires external pull-up for output function, with I2C0 data SDA0, Timer 0 match output MAT0.0 and external interrupt 1 input EINT1. |
| 27 | P0.4/SCK0/CAP0.1/AD0.6 | bidirectional | Port 0 bit 4 5 V tolerant I/O (TTL levels, hysteresis), with SPI0 serial clock SCK0, Timer 0 capture input CAP0.1 and ADC 0 analog input AD0.6. |
| 28 | P1.25/EXTIN0 | bidirectional | Port 1 bit 25 standard I/O with internal pull-up (60 kΩ to 300 kΩ), with external trigger input EXTIN0. |
| 29 | P0.5/MISO0/MAT0.1/AD0.7 | bidirectional | Port 0 bit 5 5 V tolerant I/O (TTL levels, hysteresis), with SPI0 data input/output MISO0, Timer 0 match output MAT0.1 and ADC 0 analog input AD0.7. |
| 30 | P0.6/MOSI0/CAP0.2 | bidirectional | Port 0 bit 6 5 V tolerant I/O (TTL levels, hysteresis), with SPI0 data MOSI0 and Timer 0 capture input CAP0.2 (AD1.0 not available on LPC2131). |
| 31 | P0.7/SSEL0/PWM2/EINT2 | bidirectional | Port 0 bit 7 5 V tolerant I/O (TTL levels, hysteresis), with SPI0 slave select SSEL0, PWM2 output and external interrupt 2 input EINT2. |
| 32 | P1.24/TRACECLK | bidirectional | Port 1 bit 24 standard I/O with internal pull-up (60 kΩ to 300 kΩ), with trace clock output TRACECLK. |
| 33 | P0.8/TXD1/PWM4 | bidirectional | Port 0 bit 8 5 V tolerant I/O (TTL levels, hysteresis), with UART1 transmitter output TXD1 and PWM4 output. |
| 34 | P0.9/RXD1/PWM6/EINT3 | bidirectional | Port 0 bit 9 5 V tolerant I/O with glitch filter (pulses shorter than 3 ns blocked on input), with UART1 receiver input RXD1, PWM6 output and external interrupt 3 input EINT3. |
| 35 | P0.10/CAP1.0 | bidirectional | Port 0 bit 10 5 V tolerant I/O (TTL levels, hysteresis), with Timer 1 capture input CAP1.0 (RTS1 and AD1.2 are not available on LPC2131). |
| 36 | P1.23/PIPESTAT2 | bidirectional | Port 1 bit 23 standard I/O with internal pull-up (60 kΩ to 300 kΩ), with pipeline status output PIPESTAT2. |
| 37 | P0.11/CAP1.1/SCL1 | bidirectional | Port 0 bit 11 open-drain 5 V tolerant I/O compliant with I2C-bus 400 kHz; requires external pull-up for output function, with Timer 1 capture input CAP1.1 and I2C1 clock SCL1. |
| 38 | P0.12/MAT1.0 | bidirectional | Port 0 bit 12 5 V tolerant I/O (TTL levels, hysteresis), with Timer 1 match output MAT1.0 (DSR1 and AD1.3 are not available on LPC2131). |
| 39 | P0.13/MAT1.1 | bidirectional | Port 0 bit 13 5 V tolerant I/O (TTL levels, hysteresis), with Timer 1 match output MAT1.1 (DTR1 and AD1.4 are not available on LPC2131). |
| 40 | P1.22/PIPESTAT1 | bidirectional | Port 1 bit 22 standard I/O with internal pull-up (60 kΩ to 300 kΩ), with pipeline status output PIPESTAT1. |
| 41 | P0.14/EINT1/SDA1 | bidirectional | Port 0 bit 14 open-drain 5 V tolerant I/O compliant with I2C-bus 400 kHz; requires external pull-up for output function, with external interrupt 1 input EINT1 and I2C1 data SDA1 (DCD1 is not available on LPC2131). |
| 42 | VSS | power_in | Ground reference, 0 V. |
| 43 | VDD | power_in | 3.3 V power supply for the core and I/O ports (3.0 V to 3.6 V). |
| 44 | P1.21/PIPESTAT0 | bidirectional | Port 1 bit 21 standard I/O with internal pull-up (60 kΩ to 300 kΩ), with pipeline status output PIPESTAT0. |
| 45 | P0.15/EINT2 | bidirectional | Port 0 bit 15 5 V tolerant I/O (TTL levels, hysteresis), with external interrupt 2 input EINT2 (RI1 and AD1.5 are not available on LPC2131). |
| 46 | P0.16/EINT0/MAT0.2/CAP0.2 | bidirectional | Port 0 bit 16 5 V tolerant I/O with glitch filter (pulses shorter than 3 ns blocked on input), with external interrupt 0 input EINT0, Timer 0 match output MAT0.2 and capture input CAP0.2. |
| 47 | P0.17/CAP1.2/SCK1/MAT1.2 | bidirectional | Port 0 bit 17 5 V tolerant I/O (TTL levels, hysteresis), with Timer 1 capture input CAP1.2, SSP serial clock SCK1 and Timer 1 match output MAT1.2. |
| 48 | P1.20/TRACESYNC | bidirectional | Port 1 bit 20 standard I/O with internal pull-up (60 kΩ to 300 kΩ); LOW on TRACESYNC while RESET is LOW enables P1.25:16 as trace port after reset. |
| 49 | VBAT | power_in | RTC power supply, 3.3 V (2.0 V to 3.6 V), supplies power to the RTC. |
| 50 | VSS | power_in | Ground reference, 0 V. |
| 51 | VDD | power_in | 3.3 V power supply for the core and I/O ports (3.0 V to 3.6 V). |
| 52 | P1.30/TMS | bidirectional | Port 1 bit 30 I/O with JTAG Test Mode Select input TMS; 5 V tolerant I/O. |
| 53 | P0.18/CAP1.3/MISO1/MAT1.3 | bidirectional | Port 0 bit 18 5 V tolerant I/O (TTL levels, hysteresis), with Timer 1 capture input CAP1.3, SSP data MISO1 and Timer 1 match output MAT1.3. |
| 54 | P0.19/MAT1.2/MOSI1/CAP1.2 | bidirectional | Port 0 bit 19 5 V tolerant I/O (TTL levels, hysteresis), with Timer 1 match output MAT1.2, SSP data MOSI1 and Timer 1 capture input CAP1.2. |
| 55 | P0.20/MAT1.3/SSEL1/EINT3 | bidirectional | Port 0 bit 20 5 V tolerant I/O (TTL levels, hysteresis), with Timer 1 match output MAT1.3, SSP slave select SSEL1 and external interrupt 3 input EINT3. |
| 56 | P1.29/TCK | bidirectional | Port 1 bit 29 I/O with JTAG Test Clock input TCK; 5 V tolerant I/O. |
| 57 | RESET | input | External reset input; a LOW resets the device to default states and execution starts at address 0 (Schmitt trigger with glitch filter, TTL with hysteresis, 5 V tolerant). |
| 58 | P0.23 | bidirectional | Port 0 bit 23 general-purpose digital I/O pin. |
| 59 | VSSA | power_in | Analog ground, 0 V; nominally the same as VSS but isolated to minimize noise and error. |
| 60 | P1.28/TDI | bidirectional | Port 1 bit 28 I/O with JTAG Test Data input TDI; 5 V tolerant I/O. |
| 61 | XTAL2 | output | Output from the on-chip oscillator amplifier; leave unconnected when XTAL1 is driven in slave mode. |
| 62 | XTAL1 | input | Input to the on-chip oscillator circuit and internal clock generator; input voltage limited to 1.8 V (crystal 1 MHz to 30 MHz or external clock up to 50 MHz). |
| 63 | VREF | power_in | ADC/DAC reference voltage, nominally equal to VDD (2.5 V to 3.6 V) and isolated to minimize noise. |
| 64 | P1.27/TDO | bidirectional | Port 1 bit 27 I/O with JTAG Test Data output TDO. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD supply voltage (core and external rail) | VDD | 3 | 3.3 | 3.6 | V | 27 | |
| VDDA analog 3.3 V pad supply voltage | VDDA | 2.5 | 3.3 | 3.6 | V | 27 | |
| Input voltage on pin VBAT | Vi(VBAT) | 2 | 3.3 | 3.6 | V | 27 | |
| Input voltage on pin VREF | Vi(VREF) | 2.5 | 3.3 | 3.6 | V | 27 | |
| VDD supply voltage (core and external rail) | VDD | -0.5 | 3.6 | V | 26 | ||
| VDDA analog 3.3 V pad supply voltage | VDDA | -0.5 | 4.6 | V | 26 | ||
| Input voltage on pin VBAT for the RTC | Vi(VBAT) | -0.5 | 4.6 | V | 26 | ||
| Input voltage on pin VREF | Vi(VREF) | -0.5 | 4.6 | V | 26 | ||
| Analog input voltage on ADC related pins | VIA | -0.5 | 5.1 | V | 26 | ||
| Input voltage 5 V tolerant I/O pins | VI | -0.5 | 6 | V | 5 V tolerant I/O pins; only valid when the VDD supply voltage is present | 26 | |
| Input voltage other I/O pins | VI | -0.5 | V | other I/O pins; max printed as VDD + 0.5 V | 26 | ||
| Supply current per supply pin | IDD | -100 | mA | per supply pin | 26 | ||
| Ground current per ground pin | ISS | -100 | mA | per ground pin | 26 | ||
| Sink current for I2C-bus | Isink | 20 | mA | DC; T = 85 °C | 26 | ||
| Storage temperature | Tstg | -40 | 125 | °C | 26 | ||
| Total power dissipation (per package) | Ptot(pack) | 1.5 | W | based on package heat transfer, not device power consumption | 26 | ||
| Electrostatic discharge voltage, all pins | VESD | -4000 | 4000 | V | human body model | 26 | |
| LOW-level input current (standard port pins, RESET, P1.26/RTCK) | IIL | 3 | µA | VI = 0 V; no pull-up | 27 | ||
| HIGH-level input current (standard port pins, RESET, P1.26/RTCK) | IIH | 3 | µA | VI = VDD; no pull-down | 27 | ||
| OFF-state output current | IOZ | -3 | µA | VO = 0 V; VO = VDD; no pull-up/down | 27 | ||
| I/O latch-up current | Ilatch | 100 | mA | (0.5VDD) < VI < (1.5VDD); Tj < 125 °C | 27 | ||
| Input voltage, pin configured to provide a digital function | VI | 0 | 5.5 | V | pin configured to provide a digital function | 27 | |
| Output voltage | VO | 0 | V | output active; max printed as VDD | 27 | ||
| HIGH-level input voltage | VIH | 2 | V | 27 | |||
| LOW-level input voltage | VIL | 0.8 | V | 27 | |||
| Hysteresis voltage | Vhys | 0.4 | V | 27 | |||
| LOW-level output voltage | VOL | -0.4 | V | IOL = 4 mA; max printed as -0.4 (verify, see review) | 27 | ||
| HIGH-level output current | IOH | 4 | mA | VOH = VDD − 0.4 V | 27 | ||
| LOW-level output current | IOL | 4 | mA | VOL = 0.4 V | 27 | ||
| HIGH-level short-circuit output current | IOHS | 45 | mA | VOH = 0 V | 27 | ||
| LOW-level short-circuit output current | IOLS | -50 | mA | VOL = VDDA; max printed as -50 (verify, see review) | 27 | ||
| Pull-down current | Ipd | 10 | 50 | 150 | µA | VI = 5 V | 27 |
| Pull-up current | Ipu | 15 | 50 | 85 | µA | VI = 0 V | 27 |
| Power-down mode supply current | IDD(pd) | 200 | 500 | µA | VDD = 3.3 V; Tamb = 85 °C | 27 | |
| LOW-level output voltage (I2C-bus pins) | VOL | -0.4 | V | IOLS = 3 mA; max printed as -0.4 (verify, see review) | 28 | ||
| Input leakage current (I2C-bus pins) | ILI | 24 | µA | VI = VDD | 28 | ||
| Input leakage current (I2C-bus pins) | ILI | -10 | 22 | µA | VI = 5 V | 28 | |
| Input voltage on pin XTAL1 | Vi(XTAL1) | -0.5 | 1.8 | 1.95 | V | 28 | |
| Output voltage on pin XTAL2 | Vo(XTAL2) | -0.5 | 1.8 | 1.95 | V | 28 | |
| Input voltage on pin RTCX1 | Vi(RTCX1) | -0.5 | 1.8 | 1.95 | V | 28 | |
| Output voltage on pin RTCX2 | Vo(RTCX2) | -0.5 | 1.8 | 1.95 | V | 28 | |
| External oscillator frequency | fosc | 10 | 25 | MHz | 29 | ||
| Clock cycle time | Tcy(clk) | 40 | 100 | ns | 29 | ||
| Clock rise time | tCLCH | 5 | ns | 29 | |||
| Clock fall time | tCHCL | 5 | ns | 29 | |||
| Analog input voltage | VIA | 0 | V | max printed as VDDA | 32 | ||
| Analog input capacitance | Cia | 1 | pF | 32 | |||
| Differential linearity error | ED | 1 | LSB | 32 | |||
| Integral non-linearity | EL(adj) | 2 | LSB | 32 | |||
| Offset error | EO | 3 | LSB | 32 | |||
| Gain error | EG | 0.5 | % | 32 | |||
| Absolute error | ET | 4 | LSB | 32 | |||
| Voltage source interface resistance | Rvsi | 40 | kΩ | 32 |
CAD (KiCad official)
- Symbol:
LPC2131FBD64 - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
lpc2131fbd64-01-etched.step/lpc2131fbd64-01-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lpc2131fbd64-01.step/lpc2131fbd64-01.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (45 pp, sha256
b9ad6ab6361207ea, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LPC2131FBD64
**NXP Semicon** · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-64(10x10)
LPC2131FBD64 from NXP Semicon, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P0.21/PWM5/CAP1.3 | bidirectional | Port 0 bit 21 general-purpose 5 V tolerant I/O (TTL levels, hysteresis, 10 ns slew rate control), with PWM5 output and Timer 1 capture input CAP1.3. |
| 2 | P0.22/CAP0.0/MAT0.0 | bidirectional | Port 0 bit 22 general-purpose 5 V tolerant I/O (TTL levels, hysteresis), with Timer 0 capture input CAP0.0 and match output MAT0.0. |
| 3 | RTCX1 | input | Input to the RTC 32 kHz oscillator circuit; may be grounded or left floating when unused, and left floating for lowest power. |
| 4 | P1.19/TRACEPKT3 | bidirectional | Port 1 bit 19 standard I/O with internal pull-up (60 kΩ to 300 kΩ), with trace packet bit 3 output TRACEPKT3. |
| 5 | RTCX2 | output | Output from the RTC oscillator circuit; should be left floating. |
| 6 | VSS | power_in | Ground reference, 0 V. |
| 7 | VDDA | power_in | Analog 3.3 V supply, nominally equal to VDD but isolated to minimize noise; powers the on-chip PLL. |
| 8 | P1.18/TRACEPKT2 | bidirectional | Port 1 bit 18 standard I/O with internal pull-up (60 kΩ to 300 kΩ), with trace packet bit 2 output TRACEPKT2. |
| 9 | P0.25/AD0.4 | bidirectional | Port 0 bit 25 5 V tolerant I/O, with ADC 0 analog input AD0.4 (DAC output AOUT is not available on LPC2131). |
| 10 | P0.26/AD0.5 | bidirectional | Port 0 bit 26 5 V tolerant I/O (TTL levels, hysteresis), with ADC 0 analog input AD0.5 that is always connected to its pin. |
| 11 | P0.27/AD0.0/CAP0.1/MAT0.1 | bidirectional | Port 0 bit 27 5 V tolerant I/O, with ADC 0 analog input AD0.0, Timer 0 capture input CAP0.1 and match output MAT0.1. |
| 12 | P1.17/TRACEPKT1 | bidirectional | Port 1 bit 17 standard I/O with internal pull-up (60 kΩ to 300 kΩ), with trace packet bit 1 output TRACEPKT1. |
| 13 | P0.28/AD0.1/CAP0.2/MAT0.2 | bidirectional | Port 0 bit 28 5 V tolerant I/O, with ADC 0 analog input AD0.1, Timer 0 capture input CAP0.2 and match output MAT0.2. |
| 14 | P0.29/AD0.2/CAP0.3/MAT0.3 | bidirectional | Port 0 bit 29 5 V tolerant I/O, with ADC 0 analog input AD0.2, Timer 0 capture input CAP0.3 and match output MAT0.3. |
| 15 | P0.30/AD0.3/EINT3/CAP0.0 | bidirectional | Port 0 bit 30 5 V tolerant I/O, with ADC 0 analog input AD0.3, external interrupt 3 input EINT3 and Timer 0 capture input CAP0.0. |
| 16 | P1.16/TRACEPKT0 | bidirectional | Port 1 bit 16 standard I/O with internal pull-up (60 kΩ to 300 kΩ), with trace packet bit 0 output TRACEPKT0. |
| 17 | P0.31 | output | General-purpose digital output-only pin; must not be pulled LOW externally while RESET is LOW or the JTAG port will be disabled. |
| 18 | VSS | power_in | Ground reference, 0 V. |
| 19 | P0.0/TXD0/PWM1 | bidirectional | Port 0 bit 0 5 V tolerant I/O, with UART0 transmitter output TXD0 and PWM1 output. |
| 20 | P1.31/TRST | bidirectional | Port 1 bit 31 I/O pin with JTAG Test Reset input TRST; 5 V tolerant I/O. |
| 21 | P0.1/RXD0/PWM3/EINT0 | bidirectional | Port 0 bit 1 5 V tolerant I/O with glitch filter (pulses shorter than 3 ns blocked on input), with UART0 receiver input RXD0, PWM3 output and external interrupt 0 input EINT0. |
| 22 | P0.2/SCL0/CAP0.0 | bidirectional | Port 0 bit 2 open-drain 5 V tolerant I/O compliant with I2C-bus 400 kHz; requires external pull-up for output function, with I2C0 clock SCL0 and Timer 0 capture input CAP0.0. |
| 23 | VDD | power_in | 3.3 V power supply for the core and I/O ports (3.0 V to 3.6 V). |
| 24 | P1.26/RTCK | bidirectional | Port 1 bit 26 I/O with internal pull-up, with JTAG Returned Test Clock output RTCK; LOW on RTCK while RESET is LOW enables P1.31:26 as debug port. |
| 25 | VSS | power_in | Ground reference, 0 V. |
| 26 | P0.3/SDA0/MAT0.0/EINT1 | bidirectional | Port 0 bit 3 open-drain 5 V tolerant I/O compliant with I2C-bus 400 kHz; requires external pull-up for output function, with I2C0 data SDA0, Timer 0 match output MAT0.0 and external interrupt 1 input EINT1. |
| 27 | P0.4/SCK0/CAP0.1/AD0.6 | bidirectional | Port 0 bit 4 5 V tolerant I/O (TTL levels, hysteresis), with SPI0 serial clock SCK0, Timer 0 capture input CAP0.1 and ADC 0 analog input AD0.6. |
| 28 | P1.25/EXTIN0 | bidirectional | Port 1 bit 25 standard I/O with internal pull-up (60 kΩ to 300 kΩ), with external trigger input EXTIN0. |
| 29 | P0.5/MISO0/MAT0.1/AD0.7 | bidirectional | Port 0 bit 5 5 V tolerant I/O (TTL levels, hysteresis), with SPI0 data input/output MISO0, Timer 0 match output MAT0.1 and ADC 0 analog input AD0.7. |
| 30 | P0.6/MOSI0/CAP0.2 | bidirectional | Port 0 bit 6 5 V tolerant I/O (TTL levels, hysteresis), with SPI0 data MOSI0 and Timer 0 capture input CAP0.2 (AD1.0 not available on LPC2131). |
| 31 | P0.7/SSEL0/PWM2/EINT2 | bidirectional | Port 0 bit 7 5 V tolerant I/O (TTL levels, hysteresis), with SPI0 slave select SSEL0, PWM2 output and external interrupt 2 input EINT2. |
| 32 | P1.24/TRACECLK | bidirectional | Port 1 bit 24 standard I/O with internal pull-up (60 kΩ to 300 kΩ), with trace clock output TRACECLK. |
| 33 | P0.8/TXD1/PWM4 | bidirectional | Port 0 bit 8 5 V tolerant I/O (TTL levels, hysteresis), with UART1 transmitter output TXD1 and PWM4 output. |
| 34 | P0.9/RXD1/PWM6/EINT3 | bidirectional | Port 0 bit 9 5 V tolerant I/O with glitch filter (pulses shorter than 3 ns blocked on input), with UART1 receiver input RXD1, PWM6 output and external interrupt 3 input EINT3. |
| 35 | P0.10/CAP1.0 | bidirectional | Port 0 bit 10 5 V tolerant I/O (TTL levels, hysteresis), with Timer 1 capture input CAP1.0 (RTS1 and AD1.2 are not available on LPC2131). |
| 36 | P1.23/PIPESTAT2 | bidirectional | Port 1 bit 23 standard I/O with internal pull-up (60 kΩ to 300 kΩ), with pipeline status output PIPESTAT2. |
| 37 | P0.11/CAP1.1/SCL1 | bidirectional | Port 0 bit 11 open-drain 5 V tolerant I/O compliant with I2C-bus 400 kHz; requires external pull-up for output function, with Timer 1 capture input CAP1.1 and I2C1 clock SCL1. |
| 38 | P0.12/MAT1.0 | bidirectional | Port 0 bit 12 5 V tolerant I/O (TTL levels, hysteresis), with Timer 1 match output MAT1.0 (DSR1 and AD1.3 are not available on LPC2131). |
| 39 | P0.13/MAT1.1 | bidirectional | Port 0 bit 13 5 V tolerant I/O (TTL levels, hysteresis), with Timer 1 match output MAT1.1 (DTR1 and AD1.4 are not available on LPC2131). |
| 40 | P1.22/PIPESTAT1 | bidirectional | Port 1 bit 22 standard I/O with internal pull-up (60 kΩ to 300 kΩ), with pipeline status output PIPESTAT1. |
| 41 | P0.14/EINT1/SDA1 | bidirectional | Port 0 bit 14 open-drain 5 V tolerant I/O compliant with I2C-bus 400 kHz; requires external pull-up for output function, with external interrupt 1 input EINT1 and I2C1 data SDA1 (DCD1 is not available on LPC2131). |
| 42 | VSS | power_in | Ground reference, 0 V. |
| 43 | VDD | power_in | 3.3 V power supply for the core and I/O ports (3.0 V to 3.6 V). |
| 44 | P1.21/PIPESTAT0 | bidirectional | Port 1 bit 21 standard I/O with internal pull-up (60 kΩ to 300 kΩ), with pipeline status output PIPESTAT0. |
| 45 | P0.15/EINT2 | bidirectional | Port 0 bit 15 5 V tolerant I/O (TTL levels, hysteresis), with external interrupt 2 input EINT2 (RI1 and AD1.5 are not available on LPC2131). |
| 46 | P0.16/EINT0/MAT0.2/CAP0.2 | bidirectional | Port 0 bit 16 5 V tolerant I/O with glitch filter (pulses shorter than 3 ns blocked on input), with external interrupt 0 input EINT0, Timer 0 match output MAT0.2 and capture input CAP0.2. |
| 47 | P0.17/CAP1.2/SCK1/MAT1.2 | bidirectional | Port 0 bit 17 5 V tolerant I/O (TTL levels, hysteresis), with Timer 1 capture input CAP1.2, SSP serial clock SCK1 and Timer 1 match output MAT1.2. |
| 48 | P1.20/TRACESYNC | bidirectional | Port 1 bit 20 standard I/O with internal pull-up (60 kΩ to 300 kΩ); LOW on TRACESYNC while RESET is LOW enables P1.25:16 as trace port after reset. |
| 49 | VBAT | power_in | RTC power supply, 3.3 V (2.0 V to 3.6 V), supplies power to the RTC. |
| 50 | VSS | power_in | Ground reference, 0 V. |
| 51 | VDD | power_in | 3.3 V power supply for the core and I/O ports (3.0 V to 3.6 V). |
| 52 | P1.30/TMS | bidirectional | Port 1 bit 30 I/O with JTAG Test Mode Select input TMS; 5 V tolerant I/O. |
| 53 | P0.18/CAP1.3/MISO1/MAT1.3 | bidirectional | Port 0 bit 18 5 V tolerant I/O (TTL levels, hysteresis), with Timer 1 capture input CAP1.3, SSP data MISO1 and Timer 1 match output MAT1.3. |
| 54 | P0.19/MAT1.2/MOSI1/CAP1.2 | bidirectional | Port 0 bit 19 5 V tolerant I/O (TTL levels, hysteresis), with Timer 1 match output MAT1.2, SSP data MOSI1 and Timer 1 capture input CAP1.2. |
| 55 | P0.20/MAT1.3/SSEL1/EINT3 | bidirectional | Port 0 bit 20 5 V tolerant I/O (TTL levels, hysteresis), with Timer 1 match output MAT1.3, SSP slave select SSEL1 and external interrupt 3 input EINT3. |
| 56 | P1.29/TCK | bidirectional | Port 1 bit 29 I/O with JTAG Test Clock input TCK; 5 V tolerant I/O. |
| 57 | RESET | input | External reset input; a LOW resets the device to default states and execution starts at address 0 (Schmitt trigger with glitch filter, TTL with hysteresis, 5 V tolerant). |
| 58 | P0.23 | bidirectional | Port 0 bit 23 general-purpose digital I/O pin. |
| 59 | VSSA | power_in | Analog ground, 0 V; nominally the same as VSS but isolated to minimize noise and error. |
| 60 | P1.28/TDI | bidirectional | Port 1 bit 28 I/O with JTAG Test Data input TDI; 5 V tolerant I/O. |
| 61 | XTAL2 | output | Output from the on-chip oscillator amplifier; leave unconnected when XTAL1 is driven in slave mode. |
| 62 | XTAL1 | input | Input to the on-chip oscillator circuit and internal clock generator; input voltage limited to 1.8 V (crystal 1 MHz to 30 MHz or external clock up to 50 MHz). |
| 63 | VREF | power_in | ADC/DAC reference voltage, nominally equal to VDD (2.5 V to 3.6 V) and isolated to minimize noise. |
| 64 | P1.27/TDO | bidirectional | Port 1 bit 27 I/O with JTAG Test Data output TDO. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD supply voltage (core and external rail) | VDD | 3 | 3.3 | 3.6 | V | | 27 |
| VDDA analog 3.3 V pad supply voltage | VDDA | 2.5 | 3.3 | 3.6 | V | | 27 |
| Input voltage on pin VBAT | Vi(VBAT) | 2 | 3.3 | 3.6 | V | | 27 |
| Input voltage on pin VREF | Vi(VREF) | 2.5 | 3.3 | 3.6 | V | | 27 |
| VDD supply voltage (core and external rail) | VDD | -0.5 | | 3.6 | V | | 26 |
| VDDA analog 3.3 V pad supply voltage | VDDA | -0.5 | | 4.6 | V | | 26 |
| Input voltage on pin VBAT for the RTC | Vi(VBAT) | -0.5 | | 4.6 | V | | 26 |
| Input voltage on pin VREF | Vi(VREF) | -0.5 | | 4.6 | V | | 26 |
| Analog input voltage on ADC related pins | VIA | -0.5 | | 5.1 | V | | 26 |
| Input voltage 5 V tolerant I/O pins | VI | -0.5 | | 6 | V | 5 V tolerant I/O pins; only valid when the VDD supply voltage is present | 26 |
| Input voltage other I/O pins | VI | -0.5 | | | V | other I/O pins; max printed as VDD + 0.5 V | 26 |
| Supply current per supply pin | IDD | -100 | | | mA | per supply pin | 26 |
| Ground current per ground pin | ISS | -100 | | | mA | per ground pin | 26 |
| Sink current for I2C-bus | Isink | | | 20 | mA | DC; T = 85 °C | 26 |
| Storage temperature | Tstg | -40 | | 125 | °C | | 26 |
| Total power dissipation (per package) | Ptot(pack) | | | 1.5 | W | based on package heat transfer, not device power consumption | 26 |
| Electrostatic discharge voltage, all pins | VESD | -4000 | | 4000 | V | human body model | 26 |
| LOW-level input current (standard port pins, RESET, P1.26/RTCK) | IIL | | | 3 | µA | VI = 0 V; no pull-up | 27 |
| HIGH-level input current (standard port pins, RESET, P1.26/RTCK) | IIH | | | 3 | µA | VI = VDD; no pull-down | 27 |
| OFF-state output current | IOZ | -3 | | | µA | VO = 0 V; VO = VDD; no pull-up/down | 27 |
| I/O latch-up current | Ilatch | | | 100 | mA | (0.5VDD) < VI < (1.5VDD); Tj < 125 °C | 27 |
| Input voltage, pin configured to provide a digital function | VI | 0 | | 5.5 | V | pin configured to provide a digital function | 27 |
| Output voltage | VO | 0 | | | V | output active; max printed as VDD | 27 |
| HIGH-level input voltage | VIH | 2 | | | V | | 27 |
| LOW-level input voltage | VIL | | | 0.8 | V | | 27 |
| Hysteresis voltage | Vhys | 0.4 | | | V | | 27 |
| LOW-level output voltage | VOL | | | -0.4 | V | IOL = 4 mA; max printed as -0.4 (verify, see review) | 27 |
| HIGH-level output current | IOH | 4 | | | mA | VOH = VDD − 0.4 V | 27 |
| LOW-level output current | IOL | 4 | | | mA | VOL = 0.4 V | 27 |
| HIGH-level short-circuit output current | IOHS | | | 45 | mA | VOH = 0 V | 27 |
| LOW-level short-circuit output current | IOLS | | | -50 | mA | VOL = VDDA; max printed as -50 (verify, see review) | 27 |
| Pull-down current | Ipd | 10 | 50 | 150 | µA | VI = 5 V | 27 |
| Pull-up current | Ipu | 15 | 50 | 85 | µA | VI = 0 V | 27 |
| Power-down mode supply current | IDD(pd) | | 200 | 500 | µA | VDD = 3.3 V; Tamb = 85 °C | 27 |
| LOW-level output voltage (I2C-bus pins) | VOL | | | -0.4 | V | IOLS = 3 mA; max printed as -0.4 (verify, see review) | 28 |
| Input leakage current (I2C-bus pins) | ILI | | | 24 | µA | VI = VDD | 28 |
| Input leakage current (I2C-bus pins) | ILI | -10 | | 22 | µA | VI = 5 V | 28 |
| Input voltage on pin XTAL1 | Vi(XTAL1) | -0.5 | 1.8 | 1.95 | V | | 28 |
| Output voltage on pin XTAL2 | Vo(XTAL2) | -0.5 | 1.8 | 1.95 | V | | 28 |
| Input voltage on pin RTCX1 | Vi(RTCX1) | -0.5 | 1.8 | 1.95 | V | | 28 |
| Output voltage on pin RTCX2 | Vo(RTCX2) | -0.5 | 1.8 | 1.95 | V | | 28 |
| External oscillator frequency | fosc | 10 | | 25 | MHz | | 29 |
| Clock cycle time | Tcy(clk) | 40 | | 100 | ns | | 29 |
| Clock rise time | tCLCH | | | 5 | ns | | 29 |
| Clock fall time | tCHCL | | | 5 | ns | | 29 |
| Analog input voltage | VIA | 0 | | | V | max printed as VDDA | 32 |
| Analog input capacitance | Cia | | | 1 | pF | | 32 |
| Differential linearity error | ED | | | 1 | LSB | | 32 |
| Integral non-linearity | EL(adj) | | | 2 | LSB | | 32 |
| Offset error | EO | | | 3 | LSB | | 32 |
| Gain error | EG | | | 0.5 | % | | 32 |
| Absolute error | ET | | | 4 | LSB | | 32 |
| Voltage source interface resistance | Rvsi | | | 40 | kΩ | | 32 |
## CAD (KiCad official)
- Symbol: `LPC2131FBD64`
- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`
- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files: `lpc2131fbd64-01-etched.step` / `lpc2131fbd64-01-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lpc2131fbd64-01.step` / `lpc2131fbd64-01.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [NXP Semicon datasheet](https://www.nxp.com/docs/en/data-sheet/LPC2131FBD64.pdf) (45 pp, sha256 `b9ad6ab6361207ea`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lpc2131fbd64-01-datasheet.pdf)