Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LPC2131FBD64

NXP Semicon · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-64(10x10)

LPC2131FBD64 from NXP Semicon, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P0.21/PWM5/CAP1.3 bidirectional Port 0 bit 21 general-purpose 5 V tolerant I/O (TTL levels, hysteresis, 10 ns slew rate control), with PWM5 output and Timer 1 capture input CAP1.3.
2 P0.22/CAP0.0/MAT0.0 bidirectional Port 0 bit 22 general-purpose 5 V tolerant I/O (TTL levels, hysteresis), with Timer 0 capture input CAP0.0 and match output MAT0.0.
3 RTCX1 input Input to the RTC 32 kHz oscillator circuit; may be grounded or left floating when unused, and left floating for lowest power.
4 P1.19/TRACEPKT3 bidirectional Port 1 bit 19 standard I/O with internal pull-up (60 kΩ to 300 kΩ), with trace packet bit 3 output TRACEPKT3.
5 RTCX2 output Output from the RTC oscillator circuit; should be left floating.
6 VSS power_in Ground reference, 0 V.
7 VDDA power_in Analog 3.3 V supply, nominally equal to VDD but isolated to minimize noise; powers the on-chip PLL.
8 P1.18/TRACEPKT2 bidirectional Port 1 bit 18 standard I/O with internal pull-up (60 kΩ to 300 kΩ), with trace packet bit 2 output TRACEPKT2.
9 P0.25/AD0.4 bidirectional Port 0 bit 25 5 V tolerant I/O, with ADC 0 analog input AD0.4 (DAC output AOUT is not available on LPC2131).
10 P0.26/AD0.5 bidirectional Port 0 bit 26 5 V tolerant I/O (TTL levels, hysteresis), with ADC 0 analog input AD0.5 that is always connected to its pin.
11 P0.27/AD0.0/CAP0.1/MAT0.1 bidirectional Port 0 bit 27 5 V tolerant I/O, with ADC 0 analog input AD0.0, Timer 0 capture input CAP0.1 and match output MAT0.1.
12 P1.17/TRACEPKT1 bidirectional Port 1 bit 17 standard I/O with internal pull-up (60 kΩ to 300 kΩ), with trace packet bit 1 output TRACEPKT1.
13 P0.28/AD0.1/CAP0.2/MAT0.2 bidirectional Port 0 bit 28 5 V tolerant I/O, with ADC 0 analog input AD0.1, Timer 0 capture input CAP0.2 and match output MAT0.2.
14 P0.29/AD0.2/CAP0.3/MAT0.3 bidirectional Port 0 bit 29 5 V tolerant I/O, with ADC 0 analog input AD0.2, Timer 0 capture input CAP0.3 and match output MAT0.3.
15 P0.30/AD0.3/EINT3/CAP0.0 bidirectional Port 0 bit 30 5 V tolerant I/O, with ADC 0 analog input AD0.3, external interrupt 3 input EINT3 and Timer 0 capture input CAP0.0.
16 P1.16/TRACEPKT0 bidirectional Port 1 bit 16 standard I/O with internal pull-up (60 kΩ to 300 kΩ), with trace packet bit 0 output TRACEPKT0.
17 P0.31 output General-purpose digital output-only pin; must not be pulled LOW externally while RESET is LOW or the JTAG port will be disabled.
18 VSS power_in Ground reference, 0 V.
19 P0.0/TXD0/PWM1 bidirectional Port 0 bit 0 5 V tolerant I/O, with UART0 transmitter output TXD0 and PWM1 output.
20 P1.31/TRST bidirectional Port 1 bit 31 I/O pin with JTAG Test Reset input TRST; 5 V tolerant I/O.
21 P0.1/RXD0/PWM3/EINT0 bidirectional Port 0 bit 1 5 V tolerant I/O with glitch filter (pulses shorter than 3 ns blocked on input), with UART0 receiver input RXD0, PWM3 output and external interrupt 0 input EINT0.
22 P0.2/SCL0/CAP0.0 bidirectional Port 0 bit 2 open-drain 5 V tolerant I/O compliant with I2C-bus 400 kHz; requires external pull-up for output function, with I2C0 clock SCL0 and Timer 0 capture input CAP0.0.
23 VDD power_in 3.3 V power supply for the core and I/O ports (3.0 V to 3.6 V).
24 P1.26/RTCK bidirectional Port 1 bit 26 I/O with internal pull-up, with JTAG Returned Test Clock output RTCK; LOW on RTCK while RESET is LOW enables P1.31:26 as debug port.
25 VSS power_in Ground reference, 0 V.
26 P0.3/SDA0/MAT0.0/EINT1 bidirectional Port 0 bit 3 open-drain 5 V tolerant I/O compliant with I2C-bus 400 kHz; requires external pull-up for output function, with I2C0 data SDA0, Timer 0 match output MAT0.0 and external interrupt 1 input EINT1.
27 P0.4/SCK0/CAP0.1/AD0.6 bidirectional Port 0 bit 4 5 V tolerant I/O (TTL levels, hysteresis), with SPI0 serial clock SCK0, Timer 0 capture input CAP0.1 and ADC 0 analog input AD0.6.
28 P1.25/EXTIN0 bidirectional Port 1 bit 25 standard I/O with internal pull-up (60 kΩ to 300 kΩ), with external trigger input EXTIN0.
29 P0.5/MISO0/MAT0.1/AD0.7 bidirectional Port 0 bit 5 5 V tolerant I/O (TTL levels, hysteresis), with SPI0 data input/output MISO0, Timer 0 match output MAT0.1 and ADC 0 analog input AD0.7.
30 P0.6/MOSI0/CAP0.2 bidirectional Port 0 bit 6 5 V tolerant I/O (TTL levels, hysteresis), with SPI0 data MOSI0 and Timer 0 capture input CAP0.2 (AD1.0 not available on LPC2131).
31 P0.7/SSEL0/PWM2/EINT2 bidirectional Port 0 bit 7 5 V tolerant I/O (TTL levels, hysteresis), with SPI0 slave select SSEL0, PWM2 output and external interrupt 2 input EINT2.
32 P1.24/TRACECLK bidirectional Port 1 bit 24 standard I/O with internal pull-up (60 kΩ to 300 kΩ), with trace clock output TRACECLK.
33 P0.8/TXD1/PWM4 bidirectional Port 0 bit 8 5 V tolerant I/O (TTL levels, hysteresis), with UART1 transmitter output TXD1 and PWM4 output.
34 P0.9/RXD1/PWM6/EINT3 bidirectional Port 0 bit 9 5 V tolerant I/O with glitch filter (pulses shorter than 3 ns blocked on input), with UART1 receiver input RXD1, PWM6 output and external interrupt 3 input EINT3.
35 P0.10/CAP1.0 bidirectional Port 0 bit 10 5 V tolerant I/O (TTL levels, hysteresis), with Timer 1 capture input CAP1.0 (RTS1 and AD1.2 are not available on LPC2131).
36 P1.23/PIPESTAT2 bidirectional Port 1 bit 23 standard I/O with internal pull-up (60 kΩ to 300 kΩ), with pipeline status output PIPESTAT2.
37 P0.11/CAP1.1/SCL1 bidirectional Port 0 bit 11 open-drain 5 V tolerant I/O compliant with I2C-bus 400 kHz; requires external pull-up for output function, with Timer 1 capture input CAP1.1 and I2C1 clock SCL1.
38 P0.12/MAT1.0 bidirectional Port 0 bit 12 5 V tolerant I/O (TTL levels, hysteresis), with Timer 1 match output MAT1.0 (DSR1 and AD1.3 are not available on LPC2131).
39 P0.13/MAT1.1 bidirectional Port 0 bit 13 5 V tolerant I/O (TTL levels, hysteresis), with Timer 1 match output MAT1.1 (DTR1 and AD1.4 are not available on LPC2131).
40 P1.22/PIPESTAT1 bidirectional Port 1 bit 22 standard I/O with internal pull-up (60 kΩ to 300 kΩ), with pipeline status output PIPESTAT1.
41 P0.14/EINT1/SDA1 bidirectional Port 0 bit 14 open-drain 5 V tolerant I/O compliant with I2C-bus 400 kHz; requires external pull-up for output function, with external interrupt 1 input EINT1 and I2C1 data SDA1 (DCD1 is not available on LPC2131).
42 VSS power_in Ground reference, 0 V.
43 VDD power_in 3.3 V power supply for the core and I/O ports (3.0 V to 3.6 V).
44 P1.21/PIPESTAT0 bidirectional Port 1 bit 21 standard I/O with internal pull-up (60 kΩ to 300 kΩ), with pipeline status output PIPESTAT0.
45 P0.15/EINT2 bidirectional Port 0 bit 15 5 V tolerant I/O (TTL levels, hysteresis), with external interrupt 2 input EINT2 (RI1 and AD1.5 are not available on LPC2131).
46 P0.16/EINT0/MAT0.2/CAP0.2 bidirectional Port 0 bit 16 5 V tolerant I/O with glitch filter (pulses shorter than 3 ns blocked on input), with external interrupt 0 input EINT0, Timer 0 match output MAT0.2 and capture input CAP0.2.
47 P0.17/CAP1.2/SCK1/MAT1.2 bidirectional Port 0 bit 17 5 V tolerant I/O (TTL levels, hysteresis), with Timer 1 capture input CAP1.2, SSP serial clock SCK1 and Timer 1 match output MAT1.2.
48 P1.20/TRACESYNC bidirectional Port 1 bit 20 standard I/O with internal pull-up (60 kΩ to 300 kΩ); LOW on TRACESYNC while RESET is LOW enables P1.25:16 as trace port after reset.
49 VBAT power_in RTC power supply, 3.3 V (2.0 V to 3.6 V), supplies power to the RTC.
50 VSS power_in Ground reference, 0 V.
51 VDD power_in 3.3 V power supply for the core and I/O ports (3.0 V to 3.6 V).
52 P1.30/TMS bidirectional Port 1 bit 30 I/O with JTAG Test Mode Select input TMS; 5 V tolerant I/O.
53 P0.18/CAP1.3/MISO1/MAT1.3 bidirectional Port 0 bit 18 5 V tolerant I/O (TTL levels, hysteresis), with Timer 1 capture input CAP1.3, SSP data MISO1 and Timer 1 match output MAT1.3.
54 P0.19/MAT1.2/MOSI1/CAP1.2 bidirectional Port 0 bit 19 5 V tolerant I/O (TTL levels, hysteresis), with Timer 1 match output MAT1.2, SSP data MOSI1 and Timer 1 capture input CAP1.2.
55 P0.20/MAT1.3/SSEL1/EINT3 bidirectional Port 0 bit 20 5 V tolerant I/O (TTL levels, hysteresis), with Timer 1 match output MAT1.3, SSP slave select SSEL1 and external interrupt 3 input EINT3.
56 P1.29/TCK bidirectional Port 1 bit 29 I/O with JTAG Test Clock input TCK; 5 V tolerant I/O.
57 RESET input External reset input; a LOW resets the device to default states and execution starts at address 0 (Schmitt trigger with glitch filter, TTL with hysteresis, 5 V tolerant).
58 P0.23 bidirectional Port 0 bit 23 general-purpose digital I/O pin.
59 VSSA power_in Analog ground, 0 V; nominally the same as VSS but isolated to minimize noise and error.
60 P1.28/TDI bidirectional Port 1 bit 28 I/O with JTAG Test Data input TDI; 5 V tolerant I/O.
61 XTAL2 output Output from the on-chip oscillator amplifier; leave unconnected when XTAL1 is driven in slave mode.
62 XTAL1 input Input to the on-chip oscillator circuit and internal clock generator; input voltage limited to 1.8 V (crystal 1 MHz to 30 MHz or external clock up to 50 MHz).
63 VREF power_in ADC/DAC reference voltage, nominally equal to VDD (2.5 V to 3.6 V) and isolated to minimize noise.
64 P1.27/TDO bidirectional Port 1 bit 27 I/O with JTAG Test Data output TDO.

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package LQFP-64(10x10)
Category Single Chip Microcomputer/Microcontroller
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD supply voltage (core and external rail) VDD 3 3.3 3.6 V 27
VDDA analog 3.3 V pad supply voltage VDDA 2.5 3.3 3.6 V 27
Input voltage on pin VBAT Vi(VBAT) 2 3.3 3.6 V 27
Input voltage on pin VREF Vi(VREF) 2.5 3.3 3.6 V 27
VDD supply voltage (core and external rail) VDD -0.5 3.6 V 26
VDDA analog 3.3 V pad supply voltage VDDA -0.5 4.6 V 26
Input voltage on pin VBAT for the RTC Vi(VBAT) -0.5 4.6 V 26
Input voltage on pin VREF Vi(VREF) -0.5 4.6 V 26
Analog input voltage on ADC related pins VIA -0.5 5.1 V 26
Input voltage 5 V tolerant I/O pins VI -0.5 6 V 5 V tolerant I/O pins; only valid when the VDD supply voltage is present 26
Input voltage other I/O pins VI -0.5 V other I/O pins; max printed as VDD + 0.5 V 26
Supply current per supply pin IDD -100 mA per supply pin 26
Ground current per ground pin ISS -100 mA per ground pin 26
Sink current for I2C-bus Isink 20 mA DC; T = 85 °C 26
Storage temperature Tstg -40 125 °C 26
Total power dissipation (per package) Ptot(pack) 1.5 W based on package heat transfer, not device power consumption 26
Electrostatic discharge voltage, all pins VESD -4000 4000 V human body model 26
LOW-level input current (standard port pins, RESET, P1.26/RTCK) IIL 3 µA VI = 0 V; no pull-up 27
HIGH-level input current (standard port pins, RESET, P1.26/RTCK) IIH 3 µA VI = VDD; no pull-down 27
OFF-state output current IOZ -3 µA VO = 0 V; VO = VDD; no pull-up/down 27
I/O latch-up current Ilatch 100 mA (0.5VDD) < VI < (1.5VDD); Tj < 125 °C 27
Input voltage, pin configured to provide a digital function VI 0 5.5 V pin configured to provide a digital function 27
Output voltage VO 0 V output active; max printed as VDD 27
HIGH-level input voltage VIH 2 V 27
LOW-level input voltage VIL 0.8 V 27
Hysteresis voltage Vhys 0.4 V 27
LOW-level output voltage VOL -0.4 V IOL = 4 mA; max printed as -0.4 (verify, see review) 27
HIGH-level output current IOH 4 mA VOH = VDD − 0.4 V 27
LOW-level output current IOL 4 mA VOL = 0.4 V 27
HIGH-level short-circuit output current IOHS 45 mA VOH = 0 V 27
LOW-level short-circuit output current IOLS -50 mA VOL = VDDA; max printed as -50 (verify, see review) 27
Pull-down current Ipd 10 50 150 µA VI = 5 V 27
Pull-up current Ipu 15 50 85 µA VI = 0 V 27
Power-down mode supply current IDD(pd) 200 500 µA VDD = 3.3 V; Tamb = 85 °C 27
LOW-level output voltage (I2C-bus pins) VOL -0.4 V IOLS = 3 mA; max printed as -0.4 (verify, see review) 28
Input leakage current (I2C-bus pins) ILI 24 µA VI = VDD 28
Input leakage current (I2C-bus pins) ILI -10 22 µA VI = 5 V 28
Input voltage on pin XTAL1 Vi(XTAL1) -0.5 1.8 1.95 V 28
Output voltage on pin XTAL2 Vo(XTAL2) -0.5 1.8 1.95 V 28
Input voltage on pin RTCX1 Vi(RTCX1) -0.5 1.8 1.95 V 28
Output voltage on pin RTCX2 Vo(RTCX2) -0.5 1.8 1.95 V 28
External oscillator frequency fosc 10 25 MHz 29
Clock cycle time Tcy(clk) 40 100 ns 29
Clock rise time tCLCH 5 ns 29
Clock fall time tCHCL 5 ns 29
Analog input voltage VIA 0 V max printed as VDDA 32
Analog input capacitance Cia 1 pF 32
Differential linearity error ED 1 LSB 32
Integral non-linearity EL(adj) 2 LSB 32
Offset error EO 3 LSB 32
Gain error EG 0.5 % 32
Absolute error ET 4 LSB 32
Voltage source interface resistance Rvsi 40 kΩ 32

CAD (KiCad official)

  • Symbol: LPC2131FBD64
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: lpc2131fbd64-01-etched.step / lpc2131fbd64-01-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lpc2131fbd64-01.step / lpc2131fbd64-01.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (45 pp, sha256 b9ad6ab6361207ea, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF