main
Ray Publish 0.1.0 686ce72
{
  "slug": "lpc1342fhn33",
  "version": "0.1.0",
  "type": "component",
  "description": "NXP Semicon NXP MCU, QFN-32-EP(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "embedded processors & controllers",
    "lpc1342fhn33",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lpc1342fhn33.kicad_sym",
    "lpc1342fhn33.kicad_mod",
    "lpc1342fhn33.glb",
    "lpc1342fhn33.step",
    "lpc1342fhn33.lbr",
    "docs/hero.png",
    "docs/lpc1342fhn33-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lpc1342fhn33-hero.glb",
    "lpc1342fhn33-hero.overlay.json"
  ],
  "component": {
    "mpn": "LPC1342FHN33",
    "manufacturer": "NXP Semicon",
    "package": "QFN-32-EP(7x7)",
    "pin_count": 33,
    "category": "Embedded Processors & Controllers",
    "subcategory": "NXP MCU",
    "datasheet": "https://www.nxp.com/docs/en/data-sheet/LPC1311_13_42_43.pdf",
    "parts": {
      "symbol": "lpc1342fhn33.kicad_sym",
      "footprint": "lpc1342fhn33.kicad_mod",
      "model_3d": "lpc1342fhn33-hero.glb",
      "model_3d_plain": "lpc1342fhn33.glb",
      "model_3d_step": "lpc1342fhn33-etched.step",
      "model_3d_step_plain": "lpc1342fhn33.step",
      "lbr": "lpc1342fhn33.lbr"
    },
    "distributor_links": {
      "lcsc": "C1338177",
      "digikey": "2156-LPC1342FHN33,551-ND",
      "mouser": "771-LPC1342FHN33551"
    },
    "distributor_check": {
      "checked_at": "2026-11-12T19:46:07Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "2156-LPC1342FHN33,551-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "771-LPC1342FHN33551",
        "status": "found"
      },
      "matched_as": "LPC1342FHN33,551"
    },
    "pins": [
      {
        "number": "1",
        "name": "PIO2_0/DTR",
        "type": "bidirectional",
        "description": "General purpose digital I/O pin PIO2_0 with alternate output DTR (Data Terminal Ready for UART); internal pull-up enabled at reset, 5 V tolerant pad."
      },
      {
        "number": "2",
        "name": "RESET/PIO0_0",
        "type": "input",
        "description": "External reset input with 20 ns glitch filter, where a LOW-going pulse as short as 50 ns resets the device; 5 V tolerant pad, and RESET is not available in Deep power-down mode (use WAKEUP instead)."
      },
      {
        "number": "3",
        "name": "PIO0_1/CLKOUT/CT32B0_MAT2/USB_FTOGGLE",
        "type": "bidirectional",
        "description": "General purpose I/O PIO0_1 with alternate outputs CLKOUT, CT32B0_MAT2 and USB_FTOGGLE (USB 1 ms start-of-frame, LPC1342/43 only); a LOW level during reset starts the ISP command handler or USB enumeration."
      },
      {
        "number": "4",
        "name": "XTALIN",
        "type": "input",
        "description": "Input to the oscillator circuit and internal clock generator; input voltage must not exceed 1.8 V, and it may be left floating or grounded (grounding preferred) when the system oscillator is not used."
      },
      {
        "number": "5",
        "name": "XTALOUT",
        "type": "output",
        "description": "Output from the oscillator amplifier; it should be left floating when the system oscillator is not used."
      },
      {
        "number": "6",
        "name": "VDD",
        "type": "power_in",
        "description": "3.3 V supply voltage to the internal regulator, the external rail and the ADC, also used as the ADC reference voltage."
      },
      {
        "number": "7",
        "name": "PIO1_8/CT16B1_CAP0",
        "type": "bidirectional",
        "description": "General purpose digital I/O pin PIO1_8 with CT16B1_CAP0 capture input 0 for 16-bit timer 1; 5 V tolerant pad."
      },
      {
        "number": "8",
        "name": "PIO0_2/SSEL0/CT16B0_CAP0",
        "type": "bidirectional",
        "description": "General purpose digital I/O pin PIO0_2 with SSEL0 slave select for SSP0 and CT16B0_CAP0 capture input 0 for 16-bit timer 0; 5 V tolerant pad."
      },
      {
        "number": "9",
        "name": "PIO0_3/USB_VBUS",
        "type": "bidirectional",
        "description": "General purpose digital I/O pin PIO0_3 that, on LPC1342/43, monitors USB bus power (USB_VBUS) and selects ISP (LOW) or USB enumeration (HIGH) when sampled during reset; 5 V tolerant pad."
      },
      {
        "number": "10",
        "name": "PIO0_4/SCL",
        "type": "bidirectional",
        "description": "Open-drain general purpose I/O pin PIO0_4 and I2C-bus clock SCL, compliant with I2C standard mode and Fast-mode Plus, with high-current sink only when Fast-mode Plus is selected."
      },
      {
        "number": "11",
        "name": "PIO0_5/SDA",
        "type": "bidirectional",
        "description": "Open-drain general purpose I/O pin PIO0_5 and I2C-bus data SDA, compliant with I2C standard mode and Fast-mode Plus, with high-current sink only when Fast-mode Plus is selected."
      },
      {
        "number": "12",
        "name": "PIO1_9/CT16B1_MAT0",
        "type": "bidirectional",
        "description": "General purpose digital I/O pin PIO1_9 with CT16B1_MAT0 match output 0 for 16-bit timer 1; 5 V tolerant pad."
      },
      {
        "number": "13",
        "name": "USB_DM",
        "type": "bidirectional",
        "description": "USB bidirectional D- line (LPC1342/43 only), designed to USB 2.0 Full-speed and Low-speed specifications and not 5 V tolerant."
      },
      {
        "number": "14",
        "name": "USB_DP",
        "type": "bidirectional",
        "description": "USB bidirectional D+ line (LPC1342/43 only), designed to USB 2.0 Full-speed and Low-speed specifications and not 5 V tolerant."
      },
      {
        "number": "15",
        "name": "PIO0_6/USB_CONNECT/SCK0",
        "type": "bidirectional",
        "description": "General purpose digital I/O pin PIO0_6 with USB_CONNECT output to switch an external 1.5 kΩ resistor for SoftConnect (LPC1342/43) and SCK0 serial clock for SSP0; 5 V tolerant pad."
      },
      {
        "number": "16",
        "name": "PIO0_7/CTS",
        "type": "bidirectional",
        "description": "General purpose digital I/O pin PIO0_7 with high-current output driver and CTS (Clear To Send) input for UART; 5 V tolerant pad."
      },
      {
        "number": "17",
        "name": "PIO0_8/MISO0/CT16B0_MAT0",
        "type": "bidirectional",
        "description": "General purpose digital I/O pin PIO0_8 with MISO0 (Master In Slave Out) for SSP0 and CT16B0_MAT0 match output 0 for 16-bit timer 0; 5 V tolerant pad."
      },
      {
        "number": "18",
        "name": "PIO0_9/MOSI0/CT16B0_MAT1/SWO",
        "type": "bidirectional",
        "description": "General purpose digital I/O pin PIO0_9 with MOSI0 (Master Out Slave In) for SSP0, CT16B0_MAT1 match output and SWO serial wire trace output; 5 V tolerant pad."
      },
      {
        "number": "19",
        "name": "SWCLK/PIO0_10/SCK0/CT16B0_MAT2",
        "type": "input",
        "description": "Serial wire clock SWCLK input (internal pull-up at reset) that is multiplexed with general purpose I/O PIO0_10, SCK0 serial clock for SSP0 and CT16B0_MAT2 output; 5 V tolerant pad."
      },
      {
        "number": "20",
        "name": "PIO1_10/AD6/CT16B1_MAT1",
        "type": "bidirectional",
        "description": "General purpose digital I/O pin PIO1_10 with A/D converter input 6 and CT16B1_MAT1 output; when used as ADC input the digital section is disabled and the pin is not 5 V tolerant."
      },
      {
        "number": "21",
        "name": "R/PIO0_11/AD0/CT32B0_MAT3",
        "type": "bidirectional",
        "description": "Reserved (R) in default state and must be configured for an alternate function in the IOCONFIG block; general purpose I/O PIO0_11 with A/D converter input 0 and CT32B0_MAT3 output, not 5 V tolerant when used as ADC input."
      },
      {
        "number": "22",
        "name": "R/PIO1_0/AD1/CT32B1_CAP0",
        "type": "bidirectional",
        "description": "Reserved (R) in default state and must be configured for an alternate function in the IOCONFIG block; general purpose I/O PIO1_0 with A/D converter input 1 and CT32B1_CAP0 capture input 0 for 32-bit timer 1, not 5 V tolerant when used as ADC input."
      },
      {
        "number": "23",
        "name": "R/PIO1_1/AD2/CT32B1_MAT0",
        "type": "bidirectional",
        "description": "Reserved (R) in default state and must be configured for an alternate function in the IOCONFIG block; general purpose I/O PIO1_1 with A/D converter input 2 and CT32B1_MAT0 match output 0 for 32-bit timer 1, not 5 V tolerant when used as ADC input."
      },
      {
        "number": "24",
        "name": "R/PIO1_2/AD3/CT32B1_MAT1",
        "type": "bidirectional",
        "description": "Reserved (R) in default state and must be configured for an alternate function in the IOCONFIG block; general purpose I/O PIO1_2 with A/D converter input 3 and CT32B1_MAT1 match output 1 for 32-bit timer 1, not 5 V tolerant when used as ADC input."
      },
      {
        "number": "25",
        "name": "SWDIO/PIO1_3/AD4/CT32B1_MAT2",
        "type": "bidirectional",
        "description": "Serial wire debug I/O SWDIO multiplexed with general purpose I/O PIO1_3, A/D converter input 4 and CT32B1_MAT2 match output 2 for 32-bit timer 1; 5 V tolerant pad."
      },
      {
        "number": "26",
        "name": "PIO1_4/AD5/CT32B1_MAT3/WAKEUP",
        "type": "bidirectional",
        "description": "General purpose I/O PIO1_4 with A/D converter input 5, CT32B1_MAT3 output and WAKEUP pin with 20 ns glitch filter that must be pulled HIGH to enter and LOW to exit Deep power-down mode."
      },
      {
        "number": "27",
        "name": "PIO1_11/AD7",
        "type": "bidirectional",
        "description": "General purpose digital I/O pin PIO1_11 with A/D converter input 7; when used as ADC input the pin is not 5 V tolerant."
      },
      {
        "number": "28",
        "name": "PIO3_2",
        "type": "bidirectional",
        "description": "General purpose digital I/O pin PIO3_2 with internal pull-up at reset; 5 V tolerant pad with configurable pull-up/pull-down and hysteresis."
      },
      {
        "number": "29",
        "name": "VDD",
        "type": "power_in",
        "description": "3.3 V supply voltage to the internal regulator, the external rail and the ADC, also used as the ADC reference voltage."
      },
      {
        "number": "30",
        "name": "PIO1_5/RTS/CT32B0_CAP0",
        "type": "bidirectional",
        "description": "General purpose digital I/O pin PIO1_5 with RTS (Request To Send) output for UART and CT32B0_CAP0 capture input 0 for 32-bit timer 0; 5 V tolerant pad."
      },
      {
        "number": "31",
        "name": "PIO1_6/RXD/CT32B0_MAT0",
        "type": "bidirectional",
        "description": "General purpose digital I/O pin PIO1_6 with RXD receiver input for UART and CT32B0_MAT0 match output 0 for 32-bit timer 0; 5 V tolerant pad."
      },
      {
        "number": "32",
        "name": "PIO1_7/TXD/CT32B0_MAT1",
        "type": "bidirectional",
        "description": "General purpose digital I/O pin PIO1_7 with TXD transmitter output for UART and CT32B0_MAT1 match output 1 for 32-bit timer 0; 5 V tolerant pad."
      },
      {
        "number": "33",
        "name": "VSS",
        "type": "power_in",
        "description": "Thermal pad that must be connected to ground."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Package hint mismatch: the requested hint 'QFN-32-EP(7x7)' does not appear in the datasheet. Table 1; Pins 13 and 14 are shared in the datasheet: PIO3_4 and PIO3_5 are listed for LPC1311/13 only, while ; Pin 33 is the thermal pad and is the only VSS terminal listed for the HVQFN33 package in Table 4; th"
        ],
        "pages_sent": 17,
        "cost_usd": 0.0102,
        "at": "2026-11-12T19:45:55"
      },
      "datasheet": {
        "url": "https://www.nxp.com/docs/en/data-sheet/LPC1311_13_42_43.pdf",
        "pages": 74,
        "sha256": "0c5c7c6ec2d41fb4",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "model_3d_generated": {
        "generator": "factory/gen_pkg3d.py",
        "family": "QFN",
        "height_mm": 0.85,
        "height_basis": "datasheet A, nominal",
        "standoff_mm": 0.0
      },
      "pins": {
        "total": 33,
        "described": 33,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lpc1342fhn33.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.02,
          7.02,
          0.85
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c4404357498d5dd74b8e70cf5ad56721e2194567f2b2e32039eefc5ef8ce4c66",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lpc1342fhn33-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.02,
          7.02,
          0.85
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "8eff4ec0b456690367475aebb3523dd09c8b60608a1fd05fe997f776324fc814",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "HVQFN33",
      "source_page": 66,
      "D": {
        "nom_mm": 7.0,
        "range_mm": [
          6.9,
          7.1
        ]
      },
      "E1": {
        "nom_mm": 7.0,
        "range_mm": [
          6.9,
          7.1
        ]
      },
      "e": {
        "nom_mm": 0.65,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 0.85,
        "range_mm": [
          0.8,
          1.0
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "lpc1342fhn33.step",
        "verdict": "PASS",
        "reasons": [
          "height within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}