main
Ray Publish 0.1.0 2379e53
{
  "slug": "lp8867qpwprq1",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments LED Drivers, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "nixie tube driver-led driver",
    "lp8867qpwprq1",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lp8867qpwprq1.kicad_sym",
    "lp8867qpwprq1.kicad_mod",
    "lp8867qpwprq1.glb",
    "lp8867qpwprq1.step",
    "lp8867qpwprq1.lbr",
    "docs/hero.png",
    "docs/lp8867qpwprq1-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lp8867qpwprq1-hero.glb",
    "lp8867qpwprq1-hero.overlay.json",
    "lp8867qpwprq1-etched.glb"
  ],
  "component": {
    "mpn": "LP8867QPWPRQ1",
    "manufacturer": "Texas Instruments",
    "package": "HTSSOP-20-EP",
    "pin_count": 21,
    "category": "Nixie Tube Driver/LED Driver",
    "subcategory": "LED Drivers",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lp8867-q1",
    "parts": {
      "symbol": "lp8867qpwprq1.kicad_sym",
      "footprint": "lp8867qpwprq1.kicad_mod",
      "model_3d": "lp8867qpwprq1-hero.glb",
      "model_3d_plain": "lp8867qpwprq1-etched.glb",
      "model_3d_step": "lp8867qpwprq1-etched.step",
      "model_3d_step_plain": "lp8867qpwprq1.step",
      "lbr": "lp8867qpwprq1.lbr"
    },
    "distributor_links": {
      "lcsc": "C701990",
      "mouser": "595-LP8867QPWPRQ1"
    },
    "distributor_check": {
      "checked_at": "2026-10-22T23:08:45Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "deferred",
        "error": "shared DigiKey quota guard: 698 calls left today"
      },
      "mouser": {
        "pn": "595-LP8867QPWPRQ1",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VIN",
        "type": "power_in",
        "description": "Input power pin, also the input voltage OVP detection pin and input current sense positive input."
      },
      {
        "number": "2",
        "name": "LDO",
        "type": "power_out",
        "description": "Output of internal LDO; connect a 1-μF decoupling capacitor between this pin and noise-free ground, placed as close to the chip as possible."
      },
      {
        "number": "3",
        "name": "FSET",
        "type": "passive",
        "description": "DC-DC switching frequency setting pin; a resistor from 24 kΩ to 219 kΩ must be connected between this pin and ground for normal operation."
      },
      {
        "number": "4",
        "name": "VDDIO/EN",
        "type": "power_in",
        "description": "Enable input for the device as well as supply input (VDDIO) for the digital pins."
      },
      {
        "number": "5",
        "name": "FAULT",
        "type": "output",
        "description": "Open-drain fault signal output; may be left floating if unused."
      },
      {
        "number": "6",
        "name": "SYNC",
        "type": "input",
        "description": "Input for synchronizing the DC-DC converter; if unused, connect to ground to disable spread spectrum or to VDDIO/EN to enable spread spectrum."
      },
      {
        "number": "7",
        "name": "PWM",
        "type": "input",
        "description": "PWM dimming input."
      },
      {
        "number": "8",
        "name": "TSENSE",
        "type": "input",
        "description": "Input for NTC resistor divider for external temperature sensing; must be left floating if unused."
      },
      {
        "number": "9",
        "name": "TSET",
        "type": "input",
        "description": "Input for NTC resistor divider for external temperature sensing; must be connected to GND if unused."
      },
      {
        "number": "10",
        "name": "ISET",
        "type": "passive",
        "description": "LED current setting pin; a resistor from 20 kΩ to 129 kΩ must be connected between this pin and ground for normal operation."
      },
      {
        "number": "11",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "12",
        "name": "OUT4",
        "type": "passive",
        "description": "Current sink output 4 on LP8867-Q1 (GND pin on LP8869-Q1); must be connected to ground if not used."
      },
      {
        "number": "13",
        "name": "OUT3",
        "type": "passive",
        "description": "Current sink output 3; must be connected to ground if not used."
      },
      {
        "number": "14",
        "name": "OUT2",
        "type": "passive",
        "description": "Current sink output 2; must be connected to ground if not used."
      },
      {
        "number": "15",
        "name": "OUT1",
        "type": "passive",
        "description": "Current sink output 1; must be connected to ground if not used."
      },
      {
        "number": "16",
        "name": "FB",
        "type": "input",
        "description": "DC-DC feedback input; connect to the middle of a resistor divider between VOUT and ground using feedback resistor values greater than 5 kΩ."
      },
      {
        "number": "17",
        "name": "PGND",
        "type": "power_in",
        "description": "DC-DC (boost or SEPIC) power ground."
      },
      {
        "number": "18",
        "name": "SW",
        "type": "passive",
        "description": "DC-DC (boost or SEPIC) switch pin."
      },
      {
        "number": "19",
        "name": "SD",
        "type": "output",
        "description": "Power-line FET control, open-drain (current sink type) output; may be left floating if unused."
      },
      {
        "number": "20",
        "name": "VSENSE_N",
        "type": "input",
        "description": "Input current sense negative input; connect to the VIN pin when an input current sense resistor is not used."
      },
      {
        "number": "21",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The package drawing shows an exposed pad (EP) but the pin function table gives no number or connecti; Pin 12 is OUT4 on LP8867-Q1 (this MPN) but GND on LP8869-Q1; OUT4 was chosen for this MPN. Pin types"
        ],
        "pages_sent": 8,
        "cost_usd": 0.112,
        "at": "2026-10-22T23:08:17"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lp8867-q1",
        "pages": 44,
        "sha256": "4ed821b4063c8430",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 21,
        "described": 21,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lp8867qpwprq1.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.41,
          6.5,
          1.2
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "591b48b2cf432f941e527a1dbc86d8a608e1e71846853a13329b32e3e50ddc14",
        "checked": "2026-10-22",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lp8867qpwprq1-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.41,
          6.5,
          1.2
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a094c2873e779504d63a677e4bd1e8e668597e7591eb9bd7e52e84a548458def",
        "checked": "2026-10-22",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}