main
History Download
Ray Publish 0.1.0 3e8e00d

LP8545SQX

Texas Instruments · LED Drivers · WQFN-24-EP(4x4)

LP8545SQX from Texas Instruments, in a WQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND_SW power_in Boost switch ground.
2 PWM input PWM dimming input; this pin must be connected to GND if not used.
3 ISET passive Set resistor for LED current; this pin can be left floating if not used.
4 EN input Enable input pin.
5 FSET passive PWM frequency set resistor; this pin can be left floating if not used.
6 GD output Gate driver for external FET; can be left floating if not used.
7 FAULT output Open-drain fault indication output; can be left floating if not used.
8 VDDIO power_in Digital IO reference voltage for the I2C interface, 1.65V to 5V; can be connected to GND if brightness is controlled by the PWM input only.
9 GND_S power_in Signal ground.
10 SCLK input Serial clock; this pin must be connected to GND if not used.
11 SDA bidirectional Serial data; this pin must be connected to GND if not used.
12 OUT1 passive Current sink output.
13 OUT2 passive Current sink output.
14 OUT3 passive Current sink output.
15 GND_L power_in LED ground.
16 OUT4 passive Current sink output.
17 OUT5 passive Current sink output.
18 OUT6 passive Current sink output.
19 VSYNC input VSYNC input; this pin must be connected to GND if not used.
20 FILTER passive Low pass filter for PLL; this pin can be left floating if not used.
21 FB passive Boost feedback input.
22 VLDO power_out LDO output voltage; an external 5V rail can be connected to this pin in low voltage applications.
23 VIN power_in Input power supply up to 22V; if 2.7V <= VBATT < 5.5V then an external 5V rail must be used for VLDO and VIN.
24 SW passive Boost switch; with an external FET this pin acts as a current sense.
25 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WQFN-24-EP(4x4)
Category Nixie Tube Driver/LED Driver
Pins 25

CAD (KiCad official)

  • Symbol: LP8545SQX
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
  • 3D model: WQFN-24-EP(4x4) (KiCad packages3D, STEP)
  • 3D model files: lp8545sqx-etched.step / lp8545sqx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp8545sqx.step / lp8545sqx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (46 pp, sha256 b0eeda4236eba86f, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF