Generated by kicad-footprint-generator · KiCad file format 20260206
LP8545SQX
Texas Instruments · LED Drivers · WQFN-24-EP(4x4)
LP8545SQX from Texas Instruments, in a WQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND_SW | power_in | Boost switch ground. |
| 2 | PWM | input | PWM dimming input; this pin must be connected to GND if not used. |
| 3 | ISET | passive | Set resistor for LED current; this pin can be left floating if not used. |
| 4 | EN | input | Enable input pin. |
| 5 | FSET | passive | PWM frequency set resistor; this pin can be left floating if not used. |
| 6 | GD | output | Gate driver for external FET; can be left floating if not used. |
| 7 | FAULT | output | Open-drain fault indication output; can be left floating if not used. |
| 8 | VDDIO | power_in | Digital IO reference voltage for the I2C interface, 1.65V to 5V; can be connected to GND if brightness is controlled by the PWM input only. |
| 9 | GND_S | power_in | Signal ground. |
| 10 | SCLK | input | Serial clock; this pin must be connected to GND if not used. |
| 11 | SDA | bidirectional | Serial data; this pin must be connected to GND if not used. |
| 12 | OUT1 | passive | Current sink output. |
| 13 | OUT2 | passive | Current sink output. |
| 14 | OUT3 | passive | Current sink output. |
| 15 | GND_L | power_in | LED ground. |
| 16 | OUT4 | passive | Current sink output. |
| 17 | OUT5 | passive | Current sink output. |
| 18 | OUT6 | passive | Current sink output. |
| 19 | VSYNC | input | VSYNC input; this pin must be connected to GND if not used. |
| 20 | FILTER | passive | Low pass filter for PLL; this pin can be left floating if not used. |
| 21 | FB | passive | Boost feedback input. |
| 22 | VLDO | power_out | LDO output voltage; an external 5V rail can be connected to this pin in low voltage applications. |
| 23 | VIN | power_in | Input power supply up to 22V; if 2.7V <= VBATT < 5.5V then an external 5V rail must be used for VLDO and VIN. |
| 24 | SW | passive | Boost switch; with an external FET this pin acts as a current sense. |
| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-24-EP(4x4) |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 25 |
CAD (KiCad official)
- Symbol:
LP8545SQX - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm - 3D model: WQFN-24-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
lp8545sqx-etched.step/lp8545sqx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp8545sqx.step/lp8545sqx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (46 pp, sha256
b0eeda4236eba86f, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).