LP6230CMSF

{
  "slug": "lp6230cmsf",
  "version": "0.1.0",
  "type": "component",
  "description": "LOWPOWER DC-DC Converters, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "lp6230cmsf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lp6230cmsf.kicad_sym",
    "lp6230cmsf.kicad_mod",
    "lp6230cmsf.glb",
    "lp6230cmsf.step",
    "lp6230cmsf.lbr",
    "docs/hero.png",
    "docs/lp6230cmsf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lp6230cmsf-hero.glb",
    "lp6230cmsf-hero.overlay.json",
    "lp6230cmsf-etched.glb"
  ],
  "component": {
    "mpn": "LP6230CMSF",
    "manufacturer": "LOWPOWER",
    "package": "MSOP-8",
    "pin_count": 8,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588912616928923648",
    "parts": {
      "symbol": "lp6230cmsf.kicad_sym",
      "footprint": "lp6230cmsf.kicad_mod",
      "model_3d": "lp6230cmsf-hero.glb",
      "model_3d_plain": "lp6230cmsf-etched.glb",
      "model_3d_step": "lp6230cmsf-etched.step",
      "model_3d_step_plain": "lp6230cmsf.step",
      "lbr": "lp6230cmsf.lbr"
    },
    "distributor_links": {
      "lcsc": "C517057"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T02:00:44Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected (the datasheet lists this pin as 'No Connector')."
      },
      {
        "number": "2",
        "name": "FB",
        "type": "input",
        "description": "Regulation feedback input; connect an external resistive divider from VOUT to FB to set the output voltage, with VFB of 1.22 V to 1.28 V (1.25 V typical)."
      },
      {
        "number": "3",
        "name": "EN",
        "type": "input",
        "description": "Regulator on/off control input: logic high (VEN > 1.4 V) enables the regulator and logic low (VEN < 0.4 V) puts the device into low-current shutdown."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "5",
        "name": "SW",
        "type": "output",
        "description": "Switching pin, the internal power MOSFET drain/switch node; the datasheet limits SW to GND at -0.3 V to 30 V."
      },
      {
        "number": "6",
        "name": "VIN",
        "type": "power_in",
        "description": "Power supply pin; operating range is 2.2 V to 6 V, with VIN to GND absolute maximum of -0.3 V to 6.5 V."
      },
      {
        "number": "7",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected (the datasheet lists this pin as 'No Connector')."
      },
      {
        "number": "8",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected (the datasheet lists this pin as 'No Connector')."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The 'Package Type Pin Configurations' drawing on page 2 lists the pin-position labels in the order N; The datasheet only says 'Switching pin' for SW and does not give its pin type; 'output' was chosen a; The datasheet names these pins 'NC' with description 'No Connector'. The description is taken as pri"
        ],
        "pages_sent": 7,
        "cost_usd": 0.0361,
        "at": "2026-10-19T01:58:44"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588912616928923648",
        "pages": 7,
        "sha256": "d1bf9c60f5131ba8",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lp6230cmsf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "847c4c5023fe1603fbd36900a5dcc4bd3901ba473f71d42c9a469f0236eaadf3",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lp6230cmsf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c411d70a216bd95c5fb520d7b41b44197bf22312627a418ca56980b5f34b552d",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}