component
LP6230CMSF
Public Made by Adomby adom
LOWPOWER DC-DC Converters, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 20d ago |
| viewers | 20d ago |
| lp6230cmsf-etched.glb | 20d ago |
| lp6230cmsf-etched.step | 20d ago |
| lp6230cmsf-hero.glb | 20d ago |
| lp6230cmsf-hero.overlay.json | 20d ago |
| lp6230cmsf.glb | 20d ago |
| lp6230cmsf.kicad_mod | 20d ago |
| lp6230cmsf.kicad_sym | 20d ago |
| lp6230cmsf.lbr | 20d ago |
| lp6230cmsf.step | 20d ago |
| package.json | 20d ago |
| page.json | 20d ago |
| README.md | 20d ago |
LP6230CMSF
LOWPOWER · DC-DC Converters · MSOP-8
LP6230CMSF from LOWPOWER, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not connected (the datasheet lists this pin as 'No Connector'). |
| 2 | FB | input | Regulation feedback input; connect an external resistive divider from VOUT to FB to set the output voltage, with VFB of 1.22 V to 1.28 V (1.25 V typical). |
| 3 | EN | input | Regulator on/off control input: logic high (VEN > 1.4 V) enables the regulator and logic low (VEN < 0.4 V) puts the device into low-current shutdown. |
| 4 | GND | power_in | Ground. |
| 5 | SW | output | Switching pin, the internal power MOSFET drain/switch node; the datasheet limits SW to GND at -0.3 V to 30 V. |
| 6 | VIN | power_in | Power supply pin; operating range is 2.2 V to 6 V, with VIN to GND absolute maximum of -0.3 V to 6.5 V. |
| 7 | NC | unconnected | Not connected (the datasheet lists this pin as 'No Connector'). |
| 8 | NC | unconnected | Not connected (the datasheet lists this pin as 'No Connector'). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LOWPOWER |
| Package | MSOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operation voltage range | VIN | 2.2 | 6 | V | 3 | ||
| Feedback voltage | VFB | 1.22 | 1.25 | 1.28 | V | 3 | |
| Shut down current | ISD | 0.1 | 1 | μA | VEN=0V | 3 | |
| Shut down voltage | VEN(OFF) | 0.4 | V | 3 | |||
| Enable on voltage | VEN(ON) | 1.4 | V | 3 | |||
| SW current limit | ILM | 2 | A | 3 | |||
| VIN to GND | VIN | -0.3 | 6.5 | V | 3 | ||
| SW to GND | SW | -0.3 | 30 | V | 3 | ||
| Other pin to GND | -0.3 | 6 | V | 3 | |||
| Maximum junction temperature | 150 | °C | 3 | ||||
| Operating ambient temperature range | -20 | 85 | °C | 3 | |||
| Maximum soldering temperature | 260 | °C | at leads, 10 sec | 3 | |||
| Maximum power dissipation | PD | 900 | mW | MSOP8, TA=25℃ | 3 | ||
| Thermal resistance (junction to ambient) | θJA | 165 | ℃/W | 3 | |||
| Recommended inductor value | L | 2.2 | 10 | μH | 5 |
CAD (KiCad official)
- Symbol:
LP6230CMSF - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
lp6230cmsf-etched.step/lp6230cmsf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp6230cmsf.step/lp6230cmsf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LOWPOWER datasheet (7 pp, sha256
d1bf9c60f5131ba8, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).