main
Ray
Publish 0.1.0
90af867
LP5864RSMR
Texas Instruments · LED Drivers · VQFN-32(4x4)
LP5864RSMR from Texas Instruments, in a VQFN-32(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Device supply (2.7 V to 5.5 V); a 1 µF capacitor must be connected between this pin and GND, placed as close to the device as possible. |
| 2 | CS0 | output | Current sink 0; must be left floating if unused. |
| 3 | CS1 | output | Current sink 1; must be left floating if unused. |
| 4 | CS2 | output | Current sink 2; must be left floating if unused. |
| 5 | CS3 | output | Current sink 3; must be left floating if unused. |
| 6 | CS4 | output | Current sink 4; must be left floating if unused. |
| 7 | CS5 | output | Current sink 5; must be left floating if unused. |
| 8 | CS6 | output | Current sink 6; must be left floating if unused. |
| 9 | CS7 | output | Current sink 7; must be left floating if unused. |
| 10 | CS8 | output | Current sink 8; must be left floating if unused. |
| 11 | SW0 | output | High-side PMOS switch output 0; must be left floating if unused. |
| 12 | SW1 | output | High-side PMOS switch output 1; must be left floating if unused. |
| 13 | SW2 | output | High-side PMOS switch output 2; must be left floating if unused. |
| 14 | SW3 | output | High-side PMOS switch output 3; must be left floating if unused. |
| 15 | VLED | power_in | Power supply input for the high-side switches (2.7 V to 5.5 V). |
| 16 | CS9 | output | Current sink 9; must be left floating if unused. |
| 17 | CS10 | output | Current sink 10; must be left floating if unused. |
| 18 | CS11 | output | Current sink 11; must be left floating if unused. |
| 19 | CS12 | output | Current sink 12; must be left floating if unused. |
| 20 | CS13 | output | Current sink 13; must be left floating if unused. |
| 21 | CS14 | output | Current sink 14; must be left floating if unused. |
| 22 | CS15 | output | Current sink 15; must be left floating if unused. |
| 23 | CS16 | output | Current sink 16; must be left floating if unused. |
| 24 | CS17 | output | Current sink 17; must be left floating if unused. |
| 25 | VCAP | power_out | Internal LDO output; a 1 µF capacitor must be connected between this pin and GND, placed as close to the device as possible. |
| 26 | IFS | input | Interface select: low selects I2C, high selects SPI; a resistor must be connected between VIO and this pin. |
| 27 | VSYNC | input | External synchronization signal for display modes 2 and 3. |
| 28 | SCL_SCLK | input | I2C clock input or SPI clock input; pulled up to VIO when configured as I2C. |
| 29 | SDA_MOSI | bidirectional | I2C data or SPI leader-out follower-in; pulled up to VIO when configured as I2C. |
| 30 | ADDR0_MISO | bidirectional | I2C address select 0 or SPI leader-in follower-out. |
| 31 | ADDR1_SS | input | I2C address select 1 or SPI follower select. |
| 32 | VIO_EN | power_in | Digital circuit supply (1.65 V to 5.5 V) and chip enable; a 1 nF capacitor must be connected between this pin and GND, placed as close to the device as possible. |
| 33 | GND | power_in | Exposed thermal pad, common ground plane; must be well soldered to the board. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-32(4x4) |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 33 |
CAD (KiCad official)
- Symbol:
LP5864RSMR - Footprint:
Package_DFN_QFN:QFN-32-1EP_4x4mm_P0.4mm_EP2.9x2.9mm - 3D model: VQFN-32(4x4) (KiCad packages3D, STEP)
- 3D model files:
lp5864rsmr-etched.step/lp5864rsmr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp5864rsmr.step/lp5864rsmr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (41 pp, sha256
509a1307a3ae4344, retrieved 2026-11-09, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LP5864RSMR
**Texas Instruments** · LED Drivers · VQFN-32(4x4)
LP5864RSMR from Texas Instruments, in a VQFN-32(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Device supply (2.7 V to 5.5 V); a 1 µF capacitor must be connected between this pin and GND, placed as close to the device as possible. |
| 2 | CS0 | output | Current sink 0; must be left floating if unused. |
| 3 | CS1 | output | Current sink 1; must be left floating if unused. |
| 4 | CS2 | output | Current sink 2; must be left floating if unused. |
| 5 | CS3 | output | Current sink 3; must be left floating if unused. |
| 6 | CS4 | output | Current sink 4; must be left floating if unused. |
| 7 | CS5 | output | Current sink 5; must be left floating if unused. |
| 8 | CS6 | output | Current sink 6; must be left floating if unused. |
| 9 | CS7 | output | Current sink 7; must be left floating if unused. |
| 10 | CS8 | output | Current sink 8; must be left floating if unused. |
| 11 | SW0 | output | High-side PMOS switch output 0; must be left floating if unused. |
| 12 | SW1 | output | High-side PMOS switch output 1; must be left floating if unused. |
| 13 | SW2 | output | High-side PMOS switch output 2; must be left floating if unused. |
| 14 | SW3 | output | High-side PMOS switch output 3; must be left floating if unused. |
| 15 | VLED | power_in | Power supply input for the high-side switches (2.7 V to 5.5 V). |
| 16 | CS9 | output | Current sink 9; must be left floating if unused. |
| 17 | CS10 | output | Current sink 10; must be left floating if unused. |
| 18 | CS11 | output | Current sink 11; must be left floating if unused. |
| 19 | CS12 | output | Current sink 12; must be left floating if unused. |
| 20 | CS13 | output | Current sink 13; must be left floating if unused. |
| 21 | CS14 | output | Current sink 14; must be left floating if unused. |
| 22 | CS15 | output | Current sink 15; must be left floating if unused. |
| 23 | CS16 | output | Current sink 16; must be left floating if unused. |
| 24 | CS17 | output | Current sink 17; must be left floating if unused. |
| 25 | VCAP | power_out | Internal LDO output; a 1 µF capacitor must be connected between this pin and GND, placed as close to the device as possible. |
| 26 | IFS | input | Interface select: low selects I2C, high selects SPI; a resistor must be connected between VIO and this pin. |
| 27 | VSYNC | input | External synchronization signal for display modes 2 and 3. |
| 28 | SCL_SCLK | input | I2C clock input or SPI clock input; pulled up to VIO when configured as I2C. |
| 29 | SDA_MOSI | bidirectional | I2C data or SPI leader-out follower-in; pulled up to VIO when configured as I2C. |
| 30 | ADDR0_MISO | bidirectional | I2C address select 0 or SPI leader-in follower-out. |
| 31 | ADDR1_SS | input | I2C address select 1 or SPI follower select. |
| 32 | VIO_EN | power_in | Digital circuit supply (1.65 V to 5.5 V) and chip enable; a 1 nF capacitor must be connected between this pin and GND, placed as close to the device as possible. |
| 33 | GND | power_in | Exposed thermal pad, common ground plane; must be well soldered to the board. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-32(4x4) |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 33 |
## CAD (KiCad official)
- Symbol: `LP5864RSMR`
- Footprint: `Package_DFN_QFN:QFN-32-1EP_4x4mm_P0.4mm_EP2.9x2.9mm`
- 3D model: VQFN-32(4x4) (KiCad packages3D, STEP)
- 3D model files: `lp5864rsmr-etched.step` / `lp5864rsmr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lp5864rsmr.step` / `lp5864rsmr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lp5864) (41 pp, sha256 `509a1307a3ae4344`, retrieved 2026-11-09, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lp5864rsmr-datasheet.pdf)