main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lp5864rsmr: viewers · Ray
lp5864rsmr-etched.glb Publish 0.1.0 · Ray
lp5864rsmr-etched.step lp5864rsmr: factory component page (tier=lcsc) · Ray
lp5864rsmr-hero.glb lp5864rsmr: hero GLB from the etched model (keeps the MPN mark) · Ray
lp5864rsmr-hero.overlay.json Publish 0.1.0 · Ray
lp5864rsmr.glb Publish 0.1.0 · Ray
lp5864rsmr.kicad_mod Publish 0.1.0 · Ray
lp5864rsmr.kicad_sym Publish 0.1.0 · Ray
lp5864rsmr.lbr Publish 0.1.0 · Ray
lp5864rsmr.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 33 pins · Ray

LP5864RSMR

Texas Instruments · LED Drivers · VQFN-32(4x4)

LP5864RSMR from Texas Instruments, in a VQFN-32(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Device supply (2.7 V to 5.5 V); a 1 µF capacitor must be connected between this pin and GND, placed as close to the device as possible.
2 CS0 output Current sink 0; must be left floating if unused.
3 CS1 output Current sink 1; must be left floating if unused.
4 CS2 output Current sink 2; must be left floating if unused.
5 CS3 output Current sink 3; must be left floating if unused.
6 CS4 output Current sink 4; must be left floating if unused.
7 CS5 output Current sink 5; must be left floating if unused.
8 CS6 output Current sink 6; must be left floating if unused.
9 CS7 output Current sink 7; must be left floating if unused.
10 CS8 output Current sink 8; must be left floating if unused.
11 SW0 output High-side PMOS switch output 0; must be left floating if unused.
12 SW1 output High-side PMOS switch output 1; must be left floating if unused.
13 SW2 output High-side PMOS switch output 2; must be left floating if unused.
14 SW3 output High-side PMOS switch output 3; must be left floating if unused.
15 VLED power_in Power supply input for the high-side switches (2.7 V to 5.5 V).
16 CS9 output Current sink 9; must be left floating if unused.
17 CS10 output Current sink 10; must be left floating if unused.
18 CS11 output Current sink 11; must be left floating if unused.
19 CS12 output Current sink 12; must be left floating if unused.
20 CS13 output Current sink 13; must be left floating if unused.
21 CS14 output Current sink 14; must be left floating if unused.
22 CS15 output Current sink 15; must be left floating if unused.
23 CS16 output Current sink 16; must be left floating if unused.
24 CS17 output Current sink 17; must be left floating if unused.
25 VCAP power_out Internal LDO output; a 1 µF capacitor must be connected between this pin and GND, placed as close to the device as possible.
26 IFS input Interface select: low selects I2C, high selects SPI; a resistor must be connected between VIO and this pin.
27 VSYNC input External synchronization signal for display modes 2 and 3.
28 SCL_SCLK input I2C clock input or SPI clock input; pulled up to VIO when configured as I2C.
29 SDA_MOSI bidirectional I2C data or SPI leader-out follower-in; pulled up to VIO when configured as I2C.
30 ADDR0_MISO bidirectional I2C address select 0 or SPI leader-in follower-out.
31 ADDR1_SS input I2C address select 1 or SPI follower select.
32 VIO_EN power_in Digital circuit supply (1.65 V to 5.5 V) and chip enable; a 1 nF capacitor must be connected between this pin and GND, placed as close to the device as possible.
33 GND power_in Exposed thermal pad, common ground plane; must be well soldered to the board.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-32(4x4)
Category Nixie Tube Driver/LED Driver
Pins 33

CAD (KiCad official)

  • Symbol: LP5864RSMR
  • Footprint: Package_DFN_QFN:QFN-32-1EP_4x4mm_P0.4mm_EP2.9x2.9mm
  • 3D model: VQFN-32(4x4) (KiCad packages3D, STEP)
  • 3D model files: lp5864rsmr-etched.step / lp5864rsmr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp5864rsmr.step / lp5864rsmr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (41 pp, sha256 509a1307a3ae4344, retrieved 2026-11-09, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF