main
History Download
Ray Publish 0.1.0 d8eeab0

LP5569ARTWR

Texas Instruments · LED Drivers · WQFN-24-EP(4x4)

LP5569ARTWR from Texas Instruments, in a WQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C2+ passive Positive pin of charge-pump flying capacitor 2; must be left floating if the charge pump is not used.
2 C1+ passive Positive pin of charge-pump flying capacitor 1; must be left floating if the charge pump is not used.
3 VIN power_in Input power (2.5 V to 5.5 V); a 1-µF capacitor must be connected between PGND and this pin.
4 AGND power_in Analog and digital ground; connect to PGND, exposed thermal pad, and common ground plane.
5 EN/PWM input Chip enable and PWM input pin.
6 CLK bidirectional Clock input/output (open-drain), a clock input by default; if not used it must be connected to GND or VIN.
7 GPIO/TRIG/INT bidirectional General-purpose input or open-drain output, trigger input or open-drain output, or interrupt open-drain output configured in I2C registers; defaults to open-drain general-purpose output and can be left floating if not used.
8 SDA bidirectional I2C bus data line (open-drain); if not used it must be connected to GND or VIN.
9 SCL input I2C bus clock line; if not used it must be connected to GND or VIN.
10 V1P8 power_in Input power for digital circuitry (1.65 V to 1.95 V recommended).
11 LED8 passive LED current sink 8; can be left floating if not used.
12 LED7 passive LED current sink 7; can be left floating if not used.
13 LED6 passive LED current sink 6; can be left floating if not used.
14 LED5 passive LED current sink 5; can be left floating if not used.
15 LED4 passive LED current sink 4; can be left floating if not used.
16 LED3 passive LED current sink 3; can be left floating if not used.
17 LED2 passive LED current sink 2; can be left floating if not used.
18 LED1 passive LED current sink 1; can be left floating if not used.
19 LED0 passive LED current sink 0; can be left floating if not used.
20 ADDR input I2C slave-address selection pin; must not be left floating.
21 PGND power_in Charge-pump power ground; connect to AGND, exposed thermal pad, and common ground plane.
22 VOUT passive Charge-pump output voltage; a 1-µF capacitor to PGND is required if the charge pump is used, and can be omitted if unused or in 1× mode only.
23 C2- passive Negative pin of charge-pump flying capacitor 2; must be left floating if the charge pump is not used.
24 C1- passive Negative pin of charge-pump flying capacitor 1; must be left floating if the charge pump is not used.
25 Exposed thermal pad power_in Must be connected to AGND (pin 4), PGND (pin 21), and common ground plane, and soldered for power dissipation and mechanical reliability.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WQFN-24-EP(4x4)
Category Nixie Tube Driver/LED Driver
Pins 25

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage on VIN, CLK, ADDR, EN/PWM, GPIO/TRIG/INT, SCL, SDA, VOUT -0.3 6 V 5
Voltage on LED0 to LED8, C1-, C2-, C1+, C2+ -0.3 6 V VVIN + 0.3 V with 6 V max 5
Voltage on V1P8 -0.3 2 V 5
Junction temperature TJ-MAX -40 125 °C 5
Storage temperature Tstg -65 150 °C 5
ESD HBM V(ESD) -2500 2500 V ANSI/ESDA/JEDEC JS-001 5
ESD CDM V(ESD) -250 250 V JESD22-C101 5
Input voltage on VIN VVIN 2.5 5.5 V 5
Voltage on LED0 to LED8, C1-, C2-, C1+, C2+, VOUT 0 V max is VVIN 5
Voltage on CLK, ADDR, EN/PWM, GPIO/TRIG/INT, SDA, SCL 0 V max is VVIN 5
Input voltage on V1P8 V1P8 1.65 1.95 V 5
Output current on VOUT 0 160 mA 5
Operating ambient temperature TA -40 85 °C 5
Junction-to-ambient thermal resistance RθJA 35.8 °C/W RTW (WQFN) 24 pins 5
Junction-to-case (top) thermal resistance RθJC(top) 26.7 °C/W 5
Junction-to-board thermal resistance RθJB 13.1 °C/W 5
Junction-to-top characterization parameter ψJT 0.4 °C/W 5
Junction-to-board characterization parameter ψJB 13.1 °C/W 5
Junction-to-case (bottom) thermal resistance RθJC(bot) 4.6 °C/W 5
VIN standby supply current IVIN 0.2 1 µA VEN/PWM = 0 V, chip_en (bit) = 0 6
VIN standby supply current IVIN 1 2 µA VEN/PWM = 3.3 V, chip_en (bit) = 0, external CLK not running 6
VIN standby supply current IVIN 2 4 µA VEN/PWM = 3.3 V, chip_en (bit) = 0, external CLK running 6
VIN normal-mode supply current IVIN 56 70 µA External CLK running, charge pump and current sinks disabled 6
VIN normal-mode supply current IVIN 65 90 µA Charge pump in 1× mode, no load, current sinks disabled 6
VIN normal-mode supply current IVIN 1.8 mA Charge pump in 1.5× mode, no load, current-sink outputs disabled 6
VIN power-save mode supply current IVIN 10 15 µA External CLK running, see Automatic Power-Save Mode 6
V1P8 standby supply current IV1P8 0.2 1 µA VEN/PWM = 0 V, chip_en(bit) = 0 6
V1P8 standby supply current IV1P8 0.2 2 µA VEN/PWM = 3.3 V, chip_en (bit) = 0, external CLK not running 6
V1P8 standby supply current IV1P8 1 4 µA VEN/PWM = 3.3 V, chip_en (bit) = 0, external CLK running 6
V1P8 normal-mode supply current IV1P8 174 190 µA External CLK running, charge pump and current sinks disabled 6
V1P8 normal-mode supply current IV1P8 180 µA Charge pump in 1.5× mode, no load, current-sink outputs disabled 6
V1P8 power-save mode supply current IV1P8 1 5 µA External CLK running 6
32-kHz internal oscillator frequency accuracy ƒOSC -10 10 % TA = 25°C 6
10-MHz internal oscillator frequency accuracy ƒOSC -7 7 % 6
Undervoltage lockout VUVLO 2.2 V VVIN falling 6
Undervoltage lockout VUVLO 2.3 V VVIN rising 6
Charge-pump output voltage VOUT 4.41 4.5 4.59 V VVIN = 3.7 V, IOUT = 160 mA, gain = 1.5× 6
Charge-pump output resistance ROUT 1 Ω Gain = 1×, VVIN = 4.2 V 6
Charge-pump output resistance ROUT 3.5 Ω Gain = 1.5×, VVIN = 3.7 V 6
Switching frequency ƒSW 1.25 MHz 6
Output current limit ICL 600 mA VOUT = 0 V, VVIN = 3.7 V, CP_CONFIG = 0xFF 6
Maximum output current IOUT 200 mA VVIN > 3.1 V, VOUT dropped 10%, gain = 1.5× 6
Maximum output current IOUT 150 mA VIN > 2.5 V, VOUT dropped 10%, gain = 1.5× 6
Maximum sink current IMAX 24.5 25.5 26.5 mA 7
Sink current accuracy ILED_ACC -4.5 4.5 % Current set to 17.5 mA. PWM = 100% 7
Matching ILED_MATCH 1 2.5 % Current set to 17.5 mA 7
Saturation voltage VSAT 90 110 mV Output current set to 25.5 mA 7
Leakage current (LED0 to LED8) ILEAKAGE 1 µA PWM = 0%, VLED = 5 V 7
LED switching frequency ƒLED 19.5 kHz 7
Input low level (EN/PWM, SCL, ADDR) VIL 0.4 V 7
Input high level (EN/PWM, SCL, ADDR) VIH 1.25 V 7
Input leakage current (EN/PWM, SCL, ADDR) Ilkg -1 1 µA VI ≤ VVIN 7
Input low level (SDA, GPIO/TRIG/INT, CLK) VIL 0.4 V Pin configured as input 7
Input high level (SDA, GPIO/TRIG/INT, CLK) VIH 1.25 V Pin configured as input 7
Input leakage current (SDA, GPIO/TRIG/INT, CLK) Ilkg -1 1 µA Pin configured as input, VVIN = 5.5 V, VI ≤ VVIN 7
Output low level VOL 0.2 0.5 V IPULLUP = 3 mA 7
Output leakage current IL 1 µA Pin configured as output, Hi-Z state 7
I2C clock frequency ƒSCL 0 400 kHz I2C fast mode 8

CAD (KiCad official)

  • Symbol: LP5569ARTWR
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
  • 3D model: WQFN-24-EP(4x4) (KiCad packages3D, STEP)
  • 3D model files: lp5569artwr-etched.step / lp5569artwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp5569artwr.step / lp5569artwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (93 pp, sha256 ebce5fc0c509be9a, retrieved 2026-10-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF