main
History Download
Ray Initial commit: component/lp55231sqe 868856a

LP55231SQE

Texas Instruments · LED Drivers · WQFN-24-EP(4x4)

LP55231SQE from Texas Instruments, in a WQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C2+ tri_state Flying capacitor 2 positive terminal; connect to 0.47 µF ceramic capacitor.
2 C1+ tri_state Flying capacitor 1 positive terminal; connect to 0.47 µF ceramic capacitor.
3 VDD power_in Power supply input, 2.7 V to 5.5 V operating range.
4 GND power_in Ground reference pin.
5 EN input Enable input; pull high to enable device operation, low for standby mode.
6 CLK input 32 kHz clock input for program execution; connect to GND if not used.
7 INT tri_state Open-drain interrupt output for microcontroller to signal program completion; can be left unconnected.
8 SDA tri_state I²C serial data line, open-drain with external pullup; 0 V to VEN logic levels.
9 SCL input I²C serial clock line, input only; 0 V to VEN logic levels.
10 TRIG tri_state Open-drain trigger input/output for device synchronization; connect to GND if not used.
11 D9 output Current source output 9 powered from VDD, 0 to 25.5 mA maximum.
12 D8 output Current source output 8 powered from VDD, 0 to 25.5 mA maximum.
13 D7 output Current source output 7 powered from VDD, 0 to 25.5 mA maximum.
14 D6 output Current source output 6 powered from VOUT, 0 to 25.5 mA maximum.
15 D5 output Current source output 5 powered from VOUT, 0 to 25.5 mA maximum.
16 D4 output Current source output 4 powered from VOUT, 0 to 25.5 mA maximum.
17 D3 output Current source output 3 powered from VOUT, 0 to 25.5 mA maximum.
18 D2 output Current source output 2 powered from VOUT, 0 to 25.5 mA maximum.
19 D1 output Current source output 1 powered from VOUT, 0 to 25.5 mA maximum.
20 ASEL0 input Address select input 0; set with ASEL0 and ASEL1 to define I²C slave address (GND/GND = 0x32).
21 ASEL1 input Address select input 1; set with ASEL0 and ASEL1 to define I²C slave address (GND/GND = 0x32).
22 VOUT power_out Charge pump output, regulated to 4.5 V typical in 1.5x mode or VDD in 1x mode.
23 C2− tri_state Flying capacitor 2 negative terminal; connect to 0.47 µF ceramic capacitor.
24 C1− tri_state Flying capacitor 1 negative terminal; connect to 0.47 µF ceramic capacitor.
25 DAP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WQFN-24-EP(4x4)
Category LED Drivers
Pins 25

CAD (KiCad official)

  • Symbol: LP55231SQE
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm
  • 3D model: WQFN-24-EP(4x4) (KiCad packages3D, STEP)
  • 3D model files: lp55231sqe-etched.step / lp55231sqe-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp55231sqe.step / lp55231sqe.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (58 pp, sha256 e7be81a7ed929d56, retrieved 2026-09-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF