← Commit history

Initial commit: component/lp55231sqe

Ray ·868856a412 ·
2 files changed +319
README.mdadded+62
@@ -0,0 +1,62 @@+# LP55231SQE++**Texas Instruments** · LED Drivers · WQFN-24-EP(4x4)++LP55231SQE from Texas Instruments, in a WQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | C2+ | tri_state | Flying capacitor 2 positive terminal; connect to 0.47 µF ceramic capacitor. |+| 2 | C1+ | tri_state | Flying capacitor 1 positive terminal; connect to 0.47 µF ceramic capacitor. |+| 3 | VDD | power_in | Power supply input, 2.7 V to 5.5 V operating range. |+| 4 | GND | power_in | Ground reference pin. |+| 5 | EN | input | Enable input; pull high to enable device operation, low for standby mode. |+| 6 | CLK | input | 32 kHz clock input for program execution; connect to GND if not used. |+| 7 | INT | tri_state | Open-drain interrupt output for microcontroller to signal program completion; can be left unconnected. |+| 8 | SDA | tri_state | I²C serial data line, open-drain with external pullup; 0 V to VEN logic levels. |+| 9 | SCL | input | I²C serial clock line, input only; 0 V to VEN logic levels. |+| 10 | TRIG | tri_state | Open-drain trigger input/output for device synchronization; connect to GND if not used. |+| 11 | D9 | output | Current source output 9 powered from VDD, 0 to 25.5 mA maximum. |+| 12 | D8 | output | Current source output 8 powered from VDD, 0 to 25.5 mA maximum. |+| 13 | D7 | output | Current source output 7 powered from VDD, 0 to 25.5 mA maximum. |+| 14 | D6 | output | Current source output 6 powered from VOUT, 0 to 25.5 mA maximum. |+| 15 | D5 | output | Current source output 5 powered from VOUT, 0 to 25.5 mA maximum. |+| 16 | D4 | output | Current source output 4 powered from VOUT, 0 to 25.5 mA maximum. |+| 17 | D3 | output | Current source output 3 powered from VOUT, 0 to 25.5 mA maximum. |+| 18 | D2 | output | Current source output 2 powered from VOUT, 0 to 25.5 mA maximum. |+| 19 | D1 | output | Current source output 1 powered from VOUT, 0 to 25.5 mA maximum. |+| 20 | ASEL0 | input | Address select input 0; set with ASEL0 and ASEL1 to define I²C slave address (GND/GND = 0x32). |+| 21 | ASEL1 | input | Address select input 1; set with ASEL0 and ASEL1 to define I²C slave address (GND/GND = 0x32). |+| 22 | VOUT | power_out | Charge pump output, regulated to 4.5 V typical in 1.5x mode or VDD in 1x mode. |+| 23 | C2− | tri_state | Flying capacitor 2 negative terminal; connect to 0.47 µF ceramic capacitor. |+| 24 | C1− | tri_state | Flying capacitor 1 negative terminal; connect to 0.47 µF ceramic capacitor. |+| 25 | DAP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WQFN-24-EP(4x4) |+| Category | LED Drivers |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `LP55231SQE`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm`+- 3D model: WQFN-24-EP(4x4) (KiCad packages3D, STEP)+- 3D model files: `lp55231sqe-etched.step` / `lp55231sqe-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lp55231sqe.step` / `lp55231sqe.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lp55231) (58 pp, sha256 `e7be81a7ed929d56`, retrieved 2026-09-27, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lp55231sqe-datasheet.pdf)
page.jsonadded+257
@@ -0,0 +1,257 @@+{+  "slug": "lp55231sqe",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments LED Drivers, WQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "led drivers",+    "lp55231sqe",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lp55231sqe.kicad_sym",+    "lp55231sqe.kicad_mod",+    "lp55231sqe.glb",+    "lp55231sqe.step",+    "lp55231sqe.lbr",+    "docs/hero.png",+    "docs/lp55231sqe-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LP55231SQE",+    "manufacturer": "Texas Instruments",+    "package": "WQFN-24-EP(4x4)",+    "pin_count": 25,+    "category": "LED Drivers",+    "subcategory": "LED Drivers",+    "datasheet": "https://www.ti.com/cn/lit/gpn/lp55231",+    "parts": {+      "symbol": "lp55231sqe.kicad_sym",+      "footprint": "lp55231sqe.kicad_mod",+      "model_3d": "lp55231sqe-etched.glb",+      "model_3d_plain": "lp55231sqe.glb",+      "model_3d_step": "lp55231sqe-etched.step",+      "model_3d_step_plain": "lp55231sqe.step",+      "lbr": "lp55231sqe.lbr"+    },+    "distributor_links": {+      "lcsc": "C701963"+    },+    "distributor_check": {+      "checked_at": "2026-09-27T04:40:14Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": null,+        "status": "no match"+      },+      "mouser": {+        "pn": null,+        "status": "no match"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "C2+",+        "type": "tri_state",+        "description": "Flying capacitor 2 positive terminal; connect to 0.47 µF ceramic capacitor."+      },+      {+        "number": "2",+        "name": "C1+",+        "type": "tri_state",+        "description": "Flying capacitor 1 positive terminal; connect to 0.47 µF ceramic capacitor."+      },+      {+        "number": "3",+        "name": "VDD",+        "type": "power_in",+        "description": "Power supply input, 2.7 V to 5.5 V operating range."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference pin."+      },+      {+        "number": "5",+        "name": "EN",+        "type": "input",+        "description": "Enable input; pull high to enable device operation, low for standby mode."+      },+      {+        "number": "6",+        "name": "CLK",+        "type": "input",+        "description": "32 kHz clock input for program execution; connect to GND if not used."+      },+      {+        "number": "7",+        "name": "INT",+        "type": "tri_state",+        "description": "Open-drain interrupt output for microcontroller to signal program completion; can be left unconnected."+      },+      {+        "number": "8",+        "name": "SDA",+        "type": "tri_state",+        "description": "I²C serial data line, open-drain with external pullup; 0 V to VEN logic levels."+      },+      {+        "number": "9",+        "name": "SCL",+        "type": "input",+        "description": "I²C serial clock line, input only; 0 V to VEN logic levels."+      },+      {+        "number": "10",+        "name": "TRIG",+        "type": "tri_state",+        "description": "Open-drain trigger input/output for device synchronization; connect to GND if not used."+      },+      {+        "number": "11",+        "name": "D9",+        "type": "output",+        "description": "Current source output 9 powered from VDD, 0 to 25.5 mA maximum."+      },+      {+        "number": "12",+        "name": "D8",+        "type": "output",+        "description": "Current source output 8 powered from VDD, 0 to 25.5 mA maximum."+      },+      {+        "number": "13",+        "name": "D7",+        "type": "output",+        "description": "Current source output 7 powered from VDD, 0 to 25.5 mA maximum."+      },+      {+        "number": "14",+        "name": "D6",+        "type": "output",+        "description": "Current source output 6 powered from VOUT, 0 to 25.5 mA maximum."+      },+      {+        "number": "15",+        "name": "D5",+        "type": "output",+        "description": "Current source output 5 powered from VOUT, 0 to 25.5 mA maximum."+      },+      {+        "number": "16",+        "name": "D4",+        "type": "output",+        "description": "Current source output 4 powered from VOUT, 0 to 25.5 mA maximum."+      },+      {+        "number": "17",+        "name": "D3",+        "type": "output",+        "description": "Current source output 3 powered from VOUT, 0 to 25.5 mA maximum."+      },+      {+        "number": "18",+        "name": "D2",+        "type": "output",+        "description": "Current source output 2 powered from VOUT, 0 to 25.5 mA maximum."+      },+      {+        "number": "19",+        "name": "D1",+        "type": "output",+        "description": "Current source output 1 powered from VOUT, 0 to 25.5 mA maximum."+      },+      {+        "number": "20",+        "name": "ASEL0",+        "type": "input",+        "description": "Address select input 0; set with ASEL0 and ASEL1 to define I²C slave address (GND/GND = 0x32)."+      },+      {+        "number": "21",+        "name": "ASEL1",+        "type": "input",+        "description": "Address select input 1; set with ASEL0 and ASEL1 to define I²C slave address (GND/GND = 0x32)."+      },+      {+        "number": "22",+        "name": "VOUT",+        "type": "power_out",+        "description": "Charge pump output, regulated to 4.5 V typical in 1.5x mode or VDD in 1x mode."+      },+      {+        "number": "23",+        "name": "C2−",+        "type": "tri_state",+        "description": "Flying capacitor 2 negative terminal; connect to 0.47 µF ceramic capacitor."+      },+      {+        "number": "24",+        "name": "C1−",+        "type": "tri_state",+        "description": "Flying capacitor 1 negative terminal; connect to 0.47 µF ceramic capacitor."+      },+      {+        "number": "25",+        "name": "DAP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 25 added from the footprint"+        ],+        "pages_sent": 58,+        "cost_usd": 0.5846,+        "at": "2026-09-27T04:39:57"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/lp55231",+        "pages": 58,+        "sha256": "e7be81a7ed929d56",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 25,+        "described": 25,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file