main
Ray Publish 0.1.0 e37b309
{
  "slug": "lp4076espf",
  "version": "0.1.0",
  "type": "component",
  "description": "LOWPOWER(微源半导体) Battery Management, ESOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "lp4076espf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lp4076espf.kicad_sym",
    "lp4076espf.kicad_mod",
    "lp4076espf.glb",
    "lp4076espf.step",
    "lp4076espf.lbr",
    "docs/hero.png",
    "docs/lp4076espf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lp4076espf-hero.glb",
    "lp4076espf-hero.overlay.json",
    "lp4076espf-etched.glb"
  ],
  "component": {
    "mpn": "LP4076ESPF",
    "manufacturer": "LOWPOWER(微源半导体)",
    "package": "ESOP-8",
    "pin_count": 9,
    "category": "Power Management (PMIC)",
    "subcategory": "Battery Management",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603187454065192960",
    "parts": {
      "symbol": "lp4076espf.kicad_sym",
      "footprint": "lp4076espf.kicad_mod",
      "model_3d": "lp4076espf-hero.glb",
      "model_3d_plain": "lp4076espf-etched.glb",
      "model_3d_step": "lp4076espf-etched.step",
      "model_3d_step_plain": "lp4076espf.step",
      "lbr": "lp4076espf.lbr"
    },
    "distributor_links": {
      "lcsc": "C41375865"
    },
    "distributor_check": {
      "checked_at": "2026-11-07T04:16:55Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "TS",
        "type": "input",
        "description": "Battery temperature sense thermistor input that compares the TS voltage against the VIN-referenced hot threshold (30% VIN) and cold threshold (60% VIN), suspending charge when the battery temperature is out of range."
      },
      {
        "number": "2",
        "name": "ISET",
        "type": "input",
        "description": "Fast charge current program pin, connected to GND through an external resistor RISET where ICC = 1V × 1700 / RISET, with better than 1% precision recommended for RISET; the pin voltage is limited to 0.3V to 6.5V absolute maximum."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground; connect to the system ground."
      },
      {
        "number": "4",
        "name": "IN",
        "type": "power_in",
        "description": "Positive supply input with 4.5V to 6V recommended operating voltage and 36V absolute maximum rating, requiring a 4.7Ω resistor and a 1-10µF ceramic capacitor in series from IN to GND placed as close to the IC as possible."
      },
      {
        "number": "5",
        "name": "BAT",
        "type": "power_out",
        "description": "Battery connection that charges the single-cell Li-Ion or Li-Polymer battery, with a 1-10µF capacitor typically needed and a -5V to 14V absolute maximum rating to GND."
      },
      {
        "number": "6",
        "name": "FULL",
        "type": "output",
        "description": "Open-drain status output that is pulled low by an internal NMOS when the charge cycle is complete and is high-impedance while charging, with a -0.3V to 28V absolute maximum rating to GND."
      },
      {
        "number": "7",
        "name": "CHRG",
        "type": "output",
        "description": "Open-drain charge status output that is pulled low by an internal NMOS (about 5mA sink) while charging and is high-impedance when charging is terminated, with a -0.3V to 28V absolute maximum rating to GND."
      },
      {
        "number": "8",
        "name": "EN",
        "type": "input",
        "description": "Active-low charge enable input for the LP4076ESPF: a level below 0.4V or a floating pin enables charging, a level above 1.4V puts the device in shutdown, and the absolute maximum rating is 6.5V to GND."
      },
      {
        "number": "9",
        "name": "PAD",
        "type": "power_in",
        "description": "Exposed thermal pad that serves as the ground reference for the device and conducts heat to the PCB; adding vias under it helps lower the maximum junction temperature."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: MPN LP4076ESPF is the EN variant, so pin 8 is EN. The datasheet's LP4076SPF variant uses pin 8 as NC"
        ],
        "pages_sent": 16,
        "cost_usd": 0.0815,
        "at": "2026-11-07T04:16:41"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603187454065192960",
        "pages": 16,
        "sha256": "7b569ec21d5a561a",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lp4076espf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.9,
          4.9,
          1.65
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f1718a42c5ea007e8e2dd672ac39a1bb358ee4849bd53c42e21ce83e0e5df7a9",
        "checked": "2026-11-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lp4076espf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.9,
          4.9,
          1.65
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "89b583b1363e59c4107c73a0101b2296415abc779e46402310e373376a172cee",
        "checked": "2026-11-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}