main
Ray lp3983sab5f-08: specified limits as data (metadata.characteristics, 30 rows from the datasheet) fcae05e

LP3983SAB5F-08

LOWPOWER · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5

LP3983SAB5F-08 from LOWPOWER, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Power input voltage. Recommended operating range 2 V to 6 V (absolute max 7 V). Decouple with a ≥1 µF (typ. 2.2 µF) low-ESR ceramic capacitor placed within 0.5 inch of this pin and returned to a clean analog ground.
2 GND power_in Device ground. Return for the internal reference, bandgap, and pass element; connect to a clean analog ground plane.
3 EN input Chip enable, active high. VIH ≥ 1.4 V turns the regulator on; VIL ≤ 0.4 V places it into shutdown (<0.1 µA typ). An integrated 1 MΩ pull-down to GND holds the part off when EN is floating. Tie to VIN for always-on operation. Absolute max: -0.3 V to VIN+0.3 V.
4 ADJ input Adjustable feedback input. Connect the midpoint of an external R1/R2 divider from VOUT to GND to set the output: Vout = VFB × (1 + R1/R2), with VFB = 0.8 V (typ). A small 22 pF / 47 pF feed-forward capacitor across R1 reduces output ripple and improves transient response.
5 VOUT power_out Regulated output. Delivers up to 300 mA continuous (550 mA current limit). Requires a low-ESR ceramic output capacitor of ≥1 µF (typ. 2.2 µF, ESR > 25 mΩ recommended) placed within 0.5 inch of this pin for stability.

Key specifications

Parameter Value
Manufacturer LOWPOWER
Package SOT-23-5
Category PMIC
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • LP3983SAB5F-08

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Loading Current ILOAD 300 mA VEN=VIN, VIN>2.5V 4
Adjustable voltage reference VFB 0.784 0.8 0.816 V IOUT=1mA 4
Current Limit ILIM 550 mA RLOAD = 1Ω 4
Quiescent Current IQ 100 130 μA VEN ≥ 1.2V, IOUT = 0mA 4
Dropout Voltage VDROP 140 180 mV IOUT = 200mA, VOUT > 2.8V 4
Dropout Voltage VDROP 210 270 mV IOUT = 300mA, VOUT > 2.8V 4
Line Regulation ΔVLINE 0.2 % VIN = (VOUT + 1V) to 5.5V, IOUT = 1mA 4
Load Regulation ΔVLOAD 2 % 1mA < IOUT < 300mA 4
Standby Current ISTBY 0.1 1 μA VEN = GND, Shutdown 4
EN Input Bias Current IIBSD 5 uA VEN = GND or VIN 4
EN Logic-Low Voltage VIL 0.4 V VIN=3V to 5.5V, Shutdown 4
EN Logic-High Voltage VIH 1.4 V VIN=3V to 5.5V, Start-Up 4
Output Noise Voltage 300 uVRMS 10Hz to 100kHz, IOUT=200mA, COUT=1µF 4
Power Supply Rejection Rate PSRR -70 dB f = 217Hz, IOUT = 100mA 4
Power Supply Rejection Rate PSRR -58 dB f = 1kHz 4
Thermal Shutdown Temperature TSD 150 °C 4
EN integrated pull-low resistor (to GND) R 1 MΩ 2
Supply Input Voltage 7 V 3
EN Pin Voltage -0.3 V 3
Maximum Power Dissipation PD 0.5 W TA = 25°C 3
Maximum Junction Temperature 150 °C 3
Maximum Soldering Temperature (at leads) 260 °C 10 sec 3
Storage Temperature Range -65 165 °C 3
ESD Susceptibility HBM 2 kV Human Body Model 3
ESD Susceptibility MM 200 V Machine Model 3
Supply Input Voltage 2 6 V 3
Operation Junction Temperature Range -40 125 °C 3
Operation Ambient Temperature Range -40 85 °C 3
Thermal Resistance (JA) 195 °C/W 3
Thermal Resistance (JC) 60 °C/W 3

CAD (KiCad official)

  • Symbol: LP3983SAB5F-08
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: lp3983sab5f-08-etched.step / lp3983sab5f-08-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp3983sab5f-08.step / lp3983sab5f-08.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
lp3983sab5f-08.step 85 KB You want the bare part, or you mark your own boards.
lp3983sab5f-08-etched.step 3.0 MB You want the part with LP3983SAB5F-08 already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 705 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: LOWPOWER datasheet (8 pp, sha256 093db1b43b089814, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF