3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownLP3983SAB5F-08
LOWPOWER · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
LP3983SAB5F-08 from LOWPOWER, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input voltage. Recommended operating range 2 V to 6 V (absolute max 7 V). Decouple with a ≥1 µF (typ. 2.2 µF) low-ESR ceramic capacitor placed within 0.5 inch of this pin and returned to a clean analog ground. |
| 2 | GND | power_in | Device ground. Return for the internal reference, bandgap, and pass element; connect to a clean analog ground plane. |
| 3 | EN | input | Chip enable, active high. VIH ≥ 1.4 V turns the regulator on; VIL ≤ 0.4 V places it into shutdown (<0.1 µA typ). An integrated 1 MΩ pull-down to GND holds the part off when EN is floating. Tie to VIN for always-on operation. Absolute max: -0.3 V to VIN+0.3 V. |
| 4 | ADJ | input | Adjustable feedback input. Connect the midpoint of an external R1/R2 divider from VOUT to GND to set the output: Vout = VFB × (1 + R1/R2), with VFB = 0.8 V (typ). A small 22 pF / 47 pF feed-forward capacitor across R1 reduces output ripple and improves transient response. |
| 5 | VOUT | power_out | Regulated output. Delivers up to 300 mA continuous (550 mA current limit). Requires a low-ESR ceramic output capacitor of ≥1 µF (typ. 2.2 µF, ESR > 25 mΩ recommended) placed within 0.5 inch of this pin for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LOWPOWER |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
LP3983SAB5F-08
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Loading Current | ILOAD | 300 | mA | VEN=VIN, VIN>2.5V | 4 | ||
| Adjustable voltage reference | VFB | 0.784 | 0.8 | 0.816 | V | IOUT=1mA | 4 |
| Current Limit | ILIM | 550 | mA | RLOAD = 1Ω | 4 | ||
| Quiescent Current | IQ | 100 | 130 | μA | VEN ≥ 1.2V, IOUT = 0mA | 4 | |
| Dropout Voltage | VDROP | 140 | 180 | mV | IOUT = 200mA, VOUT > 2.8V | 4 | |
| Dropout Voltage | VDROP | 210 | 270 | mV | IOUT = 300mA, VOUT > 2.8V | 4 | |
| Line Regulation | ΔVLINE | 0.2 | % | VIN = (VOUT + 1V) to 5.5V, IOUT = 1mA | 4 | ||
| Load Regulation | ΔVLOAD | 2 | % | 1mA < IOUT < 300mA | 4 | ||
| Standby Current | ISTBY | 0.1 | 1 | μA | VEN = GND, Shutdown | 4 | |
| EN Input Bias Current | IIBSD | 5 | uA | VEN = GND or VIN | 4 | ||
| EN Logic-Low Voltage | VIL | 0.4 | V | VIN=3V to 5.5V, Shutdown | 4 | ||
| EN Logic-High Voltage | VIH | 1.4 | V | VIN=3V to 5.5V, Start-Up | 4 | ||
| Output Noise Voltage | 300 | uVRMS | 10Hz to 100kHz, IOUT=200mA, COUT=1µF | 4 | |||
| Power Supply Rejection Rate | PSRR | -70 | dB | f = 217Hz, IOUT = 100mA | 4 | ||
| Power Supply Rejection Rate | PSRR | -58 | dB | f = 1kHz | 4 | ||
| Thermal Shutdown Temperature | TSD | 150 | °C | 4 | |||
| EN integrated pull-low resistor (to GND) | R | 1 | MΩ | 2 | |||
| Supply Input Voltage | 7 | V | 3 | ||||
| EN Pin Voltage | -0.3 | V | 3 | ||||
| Maximum Power Dissipation | PD | 0.5 | W | TA = 25°C | 3 | ||
| Maximum Junction Temperature | 150 | °C | 3 | ||||
| Maximum Soldering Temperature (at leads) | 260 | °C | 10 sec | 3 | |||
| Storage Temperature Range | -65 | 165 | °C | 3 | |||
| ESD Susceptibility HBM | 2 | kV | Human Body Model | 3 | |||
| ESD Susceptibility MM | 200 | V | Machine Model | 3 | |||
| Supply Input Voltage | 2 | 6 | V | 3 | |||
| Operation Junction Temperature Range | -40 | 125 | °C | 3 | |||
| Operation Ambient Temperature Range | -40 | 85 | °C | 3 | |||
| Thermal Resistance (JA) | 195 | °C/W | 3 | ||||
| Thermal Resistance (JC) | 60 | °C/W | 3 |
CAD (KiCad official)
- Symbol:
LP3983SAB5F-08 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
lp3983sab5f-08-etched.step/lp3983sab5f-08-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp3983sab5f-08.step/lp3983sab5f-08.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
lp3983sab5f-08.step |
85 KB | You want the bare part, or you mark your own boards. |
lp3983sab5f-08-etched.step |
3.0 MB | You want the part with LP3983SAB5F-08 already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 705 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LOWPOWER datasheet (8 pp, sha256
093db1b43b089814, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).