Generated by kicad-footprint-generator · KiCad file format 20260206
LP3982IMMX-1.8
Texas Instruments · Linear Voltage Regulators (LDO) · VSSOP-8-0.65mm
LP3982IMMX-1.8 from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Regulated output voltage supporting maximum load current of 300 mA with ±2% output voltage tolerance. |
| 2 | IN | power_in | Input supply voltage ranging from 2.5 V to 6 V with dropout voltage from 0.4 mV at 1 mA to 120 mV at 300 mA. |
| 3 | GND | power_in | Ground reference connection. |
| 4 | OUT | output | Regulated output voltage supporting maximum load current of 300 mA with ±2% output voltage tolerance. |
| 5 | SET | unconnected | Output voltage adjustment pin (internally disconnected and non-functional in this fixed 1.8 V version). |
| 6 | CC | passive | Noise bypass capacitor connection to ground with optimum value of 33 nF achieving 37 μVRMS output noise (10 Hz to 100 kHz). |
| 7 | SHDN | input | Shutdown control input with logic threshold VIH 2 V to enable and VIL 0.4 V to disable, drawing 1 nA typical in shutdown. |
| 8 | FAULT | output | Active-low open-drain fault detection output asserting during over-current condition (330 mA limit), thermal shutdown (160°C typical), or dropout approach. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8-0.65mm |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage (absolute maximum: VIN, VOUT, VSHDN, VSET, VCC, VFAULT) | VIN, VOUT, VSHDN, VSET, VCC, VFAULT | -0.3 | 6.5 | V | Over operating free-air temperature range; voltages with respect to GND pin | 4 | |
| Fault sink current | 20 | mA | Over operating free-air temperature range | 4 | |||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 160 | °C | 4 | ||
| Operating temperature | -40 | 85 | °C | 4 | |||
| Supply voltage | 2.5 | 6 | V | 4 | |||
| Input voltage | VIN | 2.5 | 6 | V | For operating temperature extremes: −40°C to 85°C | 5 | |
| Output voltage tolerance | ΔVOUT | -2 | 2 | % of VOUT (NOM) | 100 μA ≤ IOUT ≤ 300 mA; VIN = VOUT + 0.5 V | 5 | |
| Output voltage tolerance over temperature | VOUT | -3 | 3 | % of VOUT (NOM) | For operating temperature extremes: −40°C to 85°C | 5 | |
| Maximum output current | IOUT | 300 | mA | Average DC current rating; for operating temperature extremes: −40°C and 85°C | 5 | ||
| Output current limit over temperature | ILIMIT | 330 | mA | For operating temperature extremes: −40°C to 85°C | 5 | ||
| Supply current at IOUT = 0 mA over temperature | IQ | 270 | μA | IOUT = 0 mA; for operating temperature extremes: −40°C to 85°C | 5 | ||
| Shutdown supply current | 0.001 | 1 | μA | VO = 0 V, SHDN = GND | 5 | ||
| Line regulation over temperature | ΔVOUT | -0.1 | 0.1 | %/V | IOUT = 1 mA, (VOUT + 0.5 V) ≤ VI ≤ 6 V; for operating temperature extremes: −40°C to 85°C | 5 | |
| SHDN input high threshold | VIH | 2 | V | (VOUT + 0.5 V) ≤ VIN ≤ 6 V; for operating temperature extremes: −40°C to 85°C | 5 | ||
| SHDN input low threshold | VIL | 0.4 | V | (VOUT + 0.5 V) ≤ VIN ≤ 6 V; for operating temperature extremes: −40°C to 85°C | 5 | ||
| SHDN input bias current | ISHDN | 0.1 | 100 | nA | SHDN = GND or IN | 5 | |
| FAULT output low voltage over temperature | 0.25 | V | ISINK = 2 mA; for operating temperature extremes: −40°C to 85°C | 6 | |||
| FAULT off-leakage current | IFAULT | 0.1 | 100 | nA | FAULT = 3.6 V, SHDN = 0 V | 6 | |
| Output current limit | ILIMIT | 770 | mA | 5 | |||
| Supply current | IQ | 90 | μA | IOUT = 0 mA | 5 | ||
| Supply current at 300 mA | IQ | 225 | μA | IOUT = 300 mA | 5 | ||
| Line regulation | ΔVOUT | 0.01 | %/V | IOUT = 1 mA, (VOUT + 0.5 V) ≤ VI ≤ 6 V | 5 | ||
| Load regulation | 0.002 | %/mA | 100 μA ≤ IOUT ≤ 300 mA | 5 | |||
| Output voltage noise | en | 37 | μVRMS | IOUT = 10 mA, 10 Hz ≤ f ≤ 100 kHz | 5 | ||
| Output voltage noise density | 190 | nV/√Hz | 10 Hz ≤ f ≤ 100 kHz, COUT = 10 μF | 5 | |||
| FAULT output low voltage | 0.115 | V | ISINK = 2 mA | 6 | |||
| Thermal shutdown temperature | TSD | 160 | °C | 6 | |||
| Thermal shutdown hysteresis | 10 | °C | 6 | ||||
| Start-up time | TON | 120 | μs | COUT = 10 μF, VOUT at 90% of final value | 6 | ||
| Junction-to-ambient thermal resistance (High-K) | RθJA | 175.2 | °C/W | High-K JEDEC PCB (JESD51-7); DGK (VSSOP) 8-pin package | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 66 | °C/W | DGK (VSSOP) 8-pin package | 4 | ||
| Junction-to-board thermal resistance | RθJB | 95.6 | °C/W | DGK (VSSOP) 8-pin package | 4 | ||
| Junction-to-top characterization parameter | ψJT | 9.7 | °C/W | DGK (VSSOP) 8-pin package | 4 | ||
| Junction-to-board characterization parameter | ψJB | 94.2 | °C/W | DGK (VSSOP) 8-pin package | 4 |
CAD (KiCad official)
- Symbol:
LP3982IMMX-1.8 - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
- 3D model files:
lp3982immx-1-8-etched.step/lp3982immx-1-8-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp3982immx-1-8.step/lp3982immx-1-8.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
f8dc0ff43bb7195c, retrieved 2026-09-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).