Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LP3982IMMX-1.8

Texas Instruments · Linear Voltage Regulators (LDO) · VSSOP-8-0.65mm

LP3982IMMX-1.8 from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Regulated output voltage supporting maximum load current of 300 mA with ±2% output voltage tolerance.
2 IN power_in Input supply voltage ranging from 2.5 V to 6 V with dropout voltage from 0.4 mV at 1 mA to 120 mV at 300 mA.
3 GND power_in Ground reference connection.
4 OUT output Regulated output voltage supporting maximum load current of 300 mA with ±2% output voltage tolerance.
5 SET unconnected Output voltage adjustment pin (internally disconnected and non-functional in this fixed 1.8 V version).
6 CC passive Noise bypass capacitor connection to ground with optimum value of 33 nF achieving 37 μVRMS output noise (10 Hz to 100 kHz).
7 SHDN input Shutdown control input with logic threshold VIH 2 V to enable and VIL 0.4 V to disable, drawing 1 nA typical in shutdown.
8 FAULT output Active-low open-drain fault detection output asserting during over-current condition (330 mA limit), thermal shutdown (160°C typical), or dropout approach.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8-0.65mm
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage (absolute maximum: VIN, VOUT, VSHDN, VSET, VCC, VFAULT) VIN, VOUT, VSHDN, VSET, VCC, VFAULT -0.3 6.5 V Over operating free-air temperature range; voltages with respect to GND pin 4
Fault sink current 20 mA Over operating free-air temperature range 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 160 °C 4
Operating temperature -40 85 °C 4
Supply voltage 2.5 6 V 4
Input voltage VIN 2.5 6 V For operating temperature extremes: −40°C to 85°C 5
Output voltage tolerance ΔVOUT -2 2 % of VOUT (NOM) 100 μA ≤ IOUT ≤ 300 mA; VIN = VOUT + 0.5 V 5
Output voltage tolerance over temperature VOUT -3 3 % of VOUT (NOM) For operating temperature extremes: −40°C to 85°C 5
Maximum output current IOUT 300 mA Average DC current rating; for operating temperature extremes: −40°C and 85°C 5
Output current limit over temperature ILIMIT 330 mA For operating temperature extremes: −40°C to 85°C 5
Supply current at IOUT = 0 mA over temperature IQ 270 μA IOUT = 0 mA; for operating temperature extremes: −40°C to 85°C 5
Shutdown supply current 0.001 1 μA VO = 0 V, SHDN = GND 5
Line regulation over temperature ΔVOUT -0.1 0.1 %/V IOUT = 1 mA, (VOUT + 0.5 V) ≤ VI ≤ 6 V; for operating temperature extremes: −40°C to 85°C 5
SHDN input high threshold VIH 2 V (VOUT + 0.5 V) ≤ VIN ≤ 6 V; for operating temperature extremes: −40°C to 85°C 5
SHDN input low threshold VIL 0.4 V (VOUT + 0.5 V) ≤ VIN ≤ 6 V; for operating temperature extremes: −40°C to 85°C 5
SHDN input bias current ISHDN 0.1 100 nA SHDN = GND or IN 5
FAULT output low voltage over temperature 0.25 V ISINK = 2 mA; for operating temperature extremes: −40°C to 85°C 6
FAULT off-leakage current IFAULT 0.1 100 nA FAULT = 3.6 V, SHDN = 0 V 6
Output current limit ILIMIT 770 mA 5
Supply current IQ 90 μA IOUT = 0 mA 5
Supply current at 300 mA IQ 225 μA IOUT = 300 mA 5
Line regulation ΔVOUT 0.01 %/V IOUT = 1 mA, (VOUT + 0.5 V) ≤ VI ≤ 6 V 5
Load regulation 0.002 %/mA 100 μA ≤ IOUT ≤ 300 mA 5
Output voltage noise en 37 μVRMS IOUT = 10 mA, 10 Hz ≤ f ≤ 100 kHz 5
Output voltage noise density 190 nV/√Hz 10 Hz ≤ f ≤ 100 kHz, COUT = 10 μF 5
FAULT output low voltage 0.115 V ISINK = 2 mA 6
Thermal shutdown temperature TSD 160 °C 6
Thermal shutdown hysteresis 10 °C 6
Start-up time TON 120 μs COUT = 10 μF, VOUT at 90% of final value 6
Junction-to-ambient thermal resistance (High-K) RθJA 175.2 °C/W High-K JEDEC PCB (JESD51-7); DGK (VSSOP) 8-pin package 4
Junction-to-case (top) thermal resistance RθJC(top) 66 °C/W DGK (VSSOP) 8-pin package 4
Junction-to-board thermal resistance RθJB 95.6 °C/W DGK (VSSOP) 8-pin package 4
Junction-to-top characterization parameter ψJT 9.7 °C/W DGK (VSSOP) 8-pin package 4
Junction-to-board characterization parameter ψJB 94.2 °C/W DGK (VSSOP) 8-pin package 4

CAD (KiCad official)

  • Symbol: LP3982IMMX-1.8
  • Footprint: Package_SO:VSSOP-8_2.3x2mm_P0.5mm
  • 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
  • 3D model files: lp3982immx-1-8-etched.step / lp3982immx-1-8-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp3982immx-1-8.step / lp3982immx-1-8.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 f8dc0ff43bb7195c, retrieved 2026-09-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF