component
LP3982IMM-3.3
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, VSSOP-8-0.65mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/lp3982imm-3-3
eebc5c9
LP3982IMM-3.3
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · VSSOP-8-0.65mm
LP3982IMM-3.3 from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Regulated output voltage pin delivering up to 300 mA maximum output current at 3.3 V. |
| 2 | IN | power_in | Input power supply pin accepting 2.5 V to 6 V with 120 mV typical dropout voltage at 300 mA output current. |
| 3 | GND | power_in | Ground reference return pin for all internal and external circuits. |
| 4 | OUT | output | Regulated output voltage pin delivering up to 300 mA maximum output current at 3.3 V. |
| 5 | SET | unconnected | Internally disconnected in the LP3982IMM-3.3 fixed version; in adjustable versions, this input pin allows external resistor divider to program the regulated output voltage. |
| 6 | CC | passive | Noise reduction bypass capacitor connection to ground with optimum value of 33 nF for 37 μVRMS output noise reduction over 10 Hz to 100 kHz bandwidth. |
| 7 | SHDN | input | Shutdown control input requiring logic high minimum 2 V to enable the regulator or logic low maximum 0.4 V to power down to 1 nA typical quiescent current. |
| 8 | FAULT | tri_state | Active-low open-drain fault output that pulls low during out-of-regulation conditions including current limit, thermal shutdown above 160 °C, or when input-to-output differential approaches the 120 mV dropout threshold. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8-0.65mm |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
LP3982IMM-3.3 - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
- 3D model files:
lp3982imm-3-3-etched.step/lp3982imm-3-3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp3982imm-3-3.step/lp3982imm-3-3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
f8dc0ff43bb7195c, retrieved 2026-09-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LP3982IMM-3.3
**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · VSSOP-8-0.65mm
LP3982IMM-3.3 from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Regulated output voltage pin delivering up to 300 mA maximum output current at 3.3 V. |
| 2 | IN | power_in | Input power supply pin accepting 2.5 V to 6 V with 120 mV typical dropout voltage at 300 mA output current. |
| 3 | GND | power_in | Ground reference return pin for all internal and external circuits. |
| 4 | OUT | output | Regulated output voltage pin delivering up to 300 mA maximum output current at 3.3 V. |
| 5 | SET | unconnected | Internally disconnected in the LP3982IMM-3.3 fixed version; in adjustable versions, this input pin allows external resistor divider to program the regulated output voltage. |
| 6 | CC | passive | Noise reduction bypass capacitor connection to ground with optimum value of 33 nF for 37 μVRMS output noise reduction over 10 Hz to 100 kHz bandwidth. |
| 7 | SHDN | input | Shutdown control input requiring logic high minimum 2 V to enable the regulator or logic low maximum 0.4 V to power down to 1 nA typical quiescent current. |
| 8 | FAULT | tri_state | Active-low open-drain fault output that pulls low during out-of-regulation conditions including current limit, thermal shutdown above 160 °C, or when input-to-output differential approaches the 120 mV dropout threshold. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8-0.65mm |
| Category | Power Management (PMIC) |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `LP3982IMM-3.3`
- Footprint: `Package_SO:VSSOP-8_2.3x2mm_P0.5mm`
- 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
- 3D model files: `lp3982imm-3-3-etched.step` / `lp3982imm-3-3-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lp3982imm-3-3.step` / `lp3982imm-3-3.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lp3982) (30 pp, sha256 `f8dc0ff43bb7195c`, retrieved 2026-09-27, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lp3982imm-3-3-datasheet.pdf)