main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lp3872emp-2-5: viewers · Ray
lp3872emp-2-5-etched.glb Publish 0.1.0 · Ray
lp3872emp-2-5-etched.step lp3872emp-2-5: factory component page (tier=mfr) · Ray
lp3872emp-2-5-hero.glb lp3872emp-2-5: hero GLB from the etched model (keeps the MPN mark) · Ray
lp3872emp-2-5-hero.overlay.json Publish 0.1.0 · Ray
lp3872emp-2-5.glb Publish 0.1.0 · Ray
lp3872emp-2-5.kicad_mod Publish 0.1.0 · Ray
lp3872emp-2-5.kicad_sym Publish 0.1.0 · Ray
lp3872emp-2-5.lbr Publish 0.1.0 · Ray
lp3872emp-2-5.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

LP3872EMP-2.5

Texas Instruments · Linear Voltage Regulators (LDO) · SOT-223-5

LP3872EMP-2.5 from Texas Instruments, in a SOT-223-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SD input Shutdown pin; must be pulled high through a 10-kΩ pullup resistor, and the part draws typically 10-nA quiescent current when SD is pulled low.
2 IN input Input supply pin; operates from a 2.5-V to 7-V input supply, with VIN maximum of 7 V and absolute maximum of 7.5 V.
3 GND power_in Ground pin; reference for the IN, SD, OUT and ERROR/SENSE pin voltage ratings.
4 OUT power_out Regulated output voltage pin; ensured output current of 1.5 A DC, short-circuit protected.
5 ERROR/SENSE passive Pin 5 function is ambiguous in the pin table: ERROR flag (LP3872) goes low when the output drops 10% below nominal, or remote voltage SENSE (LP3875); confirm against the datasheet.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-223-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage tolerance VOUT -1.5 0 1.5 % VOUT +1 V ≤ VIN ≤ 7 V, 10 mA ≤ IL ≤ 1.5 A 5
Output voltage tolerance over temperature VOUT -3 3 % VOUT +1 V ≤ VIN ≤ 7 V, 10 mA ≤ IL ≤ 1.5 A, -40°C ≤ TJ ≤ 125°C 5
Dropout voltage VIN-VOUT 38 50 mV IL = 150 mA 5
Dropout voltage over temperature VIN-VOUT 60 mV IL = 150 mA, -40°C ≤ TJ ≤ 125°C 5
Dropout voltage VIN-VOUT 380 450 mV IL = 1.5 A 5
Dropout voltage over temperature VIN-VOUT 550 mV IL = 1.5 A, -40°C ≤ TJ ≤ 125°C 5
Ground pin current in normal operation mode IGND 5 9 mA IL = 150 mA 5
Ground pin current in normal operation mode over temperature IGND 10 mA IL = 150 mA, -40°C ≤ TJ ≤ 125°C 5
Ground pin current in normal operation mode IGND 6 14 mA IL = 1.5 A 5
Ground pin current in normal operation mode over temperature IGND 15 mA IL = 1.5 A, -40°C ≤ TJ ≤ 125°C 5
Ground pin current in shutdown mode IGND 0.01 10 µA VSD ≤ 0.3 V 5
Ground pin current in shutdown mode over temperature IGND 50 µA -40°C ≤ TJ ≤ 85°C 5
Peak output current IO(PK) 1.8 A VOUT ≥ VO(NOM), 4% 5
Short-circuit current ISC 3.2 A 5
Shutdown threshold, output high VSDT 2 V Output = High, -40°C ≤ TJ ≤ 125°C 5
Shutdown threshold, output low VSDT 0 V Output = Low 5
Shutdown threshold, output low over temperature VSDT 0.3 V Output = Low, -40°C ≤ TJ ≤ 125°C 5
Turnoff delay TdOFF 20 µs IL = 1.5 A 5
Turnon delay TdON 25 µs IL = 1.5 A 5
SD input current ISD 1 nA VSD = VIN 5
ERROR flag threshold VT 10 % of VOUT See ERROR Flag Operation 5
ERROR flag threshold over temperature VT 5 16 % of VOUT -40°C ≤ TJ ≤ 125°C 5
ERROR flag threshold hysteresis VTH 5 % of VOUT See ERROR Flag Operation 5
ERROR flag threshold hysteresis over temperature VTH 2 8 % of VOUT -40°C ≤ TJ ≤ 125°C 5
ERROR flag saturation voltage VEF(Sat) 0.02 V Isink = 100 µA 5
ERROR flag saturation voltage over temperature VEF(Sat) 0.1 V Isink = 100 µA, -40°C ≤ TJ ≤ 125°C 5
Flag reset delay Td 1 µs 5
ERROR flag pin leakage current Ilk 1 nA 5
ERROR flag pin sink current Imax 1 mA VError = 0.5 V 5
Ripple rejection PSRR 73 dB VIN = VOUT + 1 V, COUT = 10 µF, VOUT = 3.3 V, f = 120 Hz 6
Ripple rejection PSRR 57 dB VIN = VOUT + 0.5 V, COUT = 10 µF, VOUT = 3.3 V, f = 120 Hz 6
Output noise voltage en 150 µV BW = 10 Hz, 100 kHz, VOUT = 2.5 V 6
Input supply voltage VIN 2.5 7 V 4
Shutdown (SD) voltage VSD -0.3 7 V 4
Maximum operating current (DC) IOUT 1.5 A 4
Junction temperature TJ -40 125 °C 4
Lead temperature (soldering, 5 sec.) 260 °C soldering, 5 sec. 4
IN pin to GND pin voltage VIN -0.3 7.5 V 4
Shutdown (SD) pin to GND pin voltage VSD -0.3 7.5 V 4
OUT pin to GND pin voltage VOUT -0.3 6 V 4
Storage temperature Tstg -65 150 °C 4
ESD human body model V(ESD) -2000 2000 V Human body model (HBM), per ANSI/ESDA/JEDEC JS-001 4
Junction-to-ambient thermal resistance (SOT-223, NDC) RθJA 65.2 °C/W NDC (SOT-223) 5 pins 4
Junction-to-case (top) thermal resistance (SOT-223, NDC) RθJC(top) 47.2 °C/W NDC (SOT-223) 5 pins 4
Junction-to-board thermal resistance (SOT-223, NDC) RθJB 9.9 °C/W NDC (SOT-223) 5 pins 4
Junction-to-top characterization parameter (SOT-223, NDC) ψJT 3.4 °C/W NDC (SOT-223) 5 pins 4
Junction-to-board characterization parameter (SOT-223, NDC) ψJB 9.7 °C/W NDC (SOT-223) 5 pins 4

CAD (KiCad official)

  • Symbol: LP3872EMP-2.5
  • Footprint: Package_TO_SOT_SMD:SOT-223-5
  • 3D model: SOT-223-5 (KiCad packages3D, STEP)
  • 3D model files: lp3872emp-2-5-etched.step / lp3872emp-2-5-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp3872emp-2-5.step / lp3872emp-2-5.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (29 pp, sha256 2f9a4693db342387, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF