main
History Download
Ray Publish 0.1.0 bf0f51d

LP3855EMP-3.3

Texas Instruments · Linear Voltage Regulators (LDO) · SOT-223-5

LP3855EMP-3.3 from Texas Instruments, in a SOT-223-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SD input Shutdown input, must be pulled high through a 10-kΩ pull-up resistor, with recommended voltage of −0.3 V to 7 V.
2 IN power_in Input supply, recommended 2.5 V to 7 V (survival rating 7.5 V).
3 OUT power_out Regulated 3.3 V output voltage, specified for up to 1.5 A DC output current.
4 SENSE input Remote sense pin that improves regulation at remote loads, with maximum voltage of VOUT.
5 GND power_in Ground.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-223-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage tolerance VOUT -1.5 0 1.5 % VOUT+1 V ≤ VIN ≤ 7 V, 10 mA ≤ IOUT ≤ 1.5 A 6
Output voltage tolerance over temperature VOUT -3 3 % VOUT+1 V ≤ VIN ≤ 7 V, 10 mA ≤ IOUT ≤ 1.5 A, -40°C ≤ TJ ≤ 125°C 6
Dropout voltage SOT, 150 mA VIN - VOUT 26 35 mV IOUT = 150 mA 6
Dropout voltage SOT, 150 mA over temperature VIN - VOUT 45 mV IOUT = 150 mA, -40°C ≤ TJ ≤ 125°C 6
Dropout voltage SOT, 1.5 A VIN - VOUT 260 320 mV IOUT = 1.5 A 6
Dropout voltage SOT, 1.5 A over temperature VIN - VOUT 435 mV IOUT = 1.5 A, -40°C ≤ TJ ≤ 125°C 6
Ground pin current, 150 mA IGND 3 9 mA IOUT = 150 mA 6
Ground pin current, 150 mA over temperature IGND 10 mA IOUT = 150 mA, -40°C ≤ TJ ≤ 125°C 6
Ground pin current, 1.5 A IGND 3 9 mA IOUT = 1.5 A 6
Ground pin current, 1.5 A over temperature IGND 10 mA IOUT = 1.5 A, -40°C ≤ TJ ≤ 125°C 6
Ground pin current in shutdown IGND 0.01 10 µA VSD ≤ 0.3 V 6
Ground pin current in shutdown over temperature IGND 50 µA -40°C ≤ TJ ≤ 85°C 6
Shutdown threshold, output ON VSDT 1.3 2 V Rising from 0.3 V, Output = ON, -40°C ≤ TJ ≤ 125°C 6
Shutdown threshold, output OFF VSDT 0.3 1.3 V Falling from 2 V, Output = OFF, -40°C ≤ TJ ≤ 125°C 6
Output voltage line regulation ΔVOUT/ΔVIN 0.02 % VOUT+1 V ≤ VIN ≤ 7 V 6
Output voltage load regulation ΔVOUT/ΔIOUT 0.06 % 10 mA ≤ IOUT ≤ 1.5 A 6
Peak output current IOUT(PK) 1.8 A VO ≥ VO(NOM), 4% 6
Short circuit current ISC 3.2 A 6
Turnoff delay TdOFF 20 µs IOUT = 1.5 A 6
Turnon delay TdON 25 µs IOUT = 1.5 A 6
SD input current ISD 1 nA VSD = VIN 6
Ripple rejection PSRR 73 dB VIN = VOUT + 1 V, COUT = 10 µF, VOUT = 3.3V, f = 120 Hz 7
Ripple rejection PSRR 57 dB VIN = VOUT + 0.5 V, COUT = 10 µF, VOUT = 3.3V, f = 120 Hz 7
Output noise density ρn(l/f) 0.8 µV f = 120 Hz 7
Output noise voltage en 150 µV (rms) BW = 10Hz, 100 kHz, VOUT = 2.5 V 7
Output noise voltage en 100 µV (rms) BW = 300 Hz, 300 kHz, VOUT = 2.5 V 7
Input supply voltage (survival) -0.3 7.5 V 5
Shutdown input voltage (survival) -0.3 7.5 V 5
Output voltage (survival) -0.3 6 V 5
Lead temperature (soldering, 5 sec.) 260 °C 5
Storage temperature Tstg -65 150 °C 5
ESD HBM V(ESD) -2000 2000 V Human-body model, ANSI/ESDA/JEDEC JS-001 5
Input supply voltage VIN 2.5 7 V 5
Shutdown input voltage VSD -0.3 7 V 5
Maximum operating current (DC) 1.5 A 5
Junction temperature TJ -40 125 °C 5
Junction-to-ambient thermal resistance, High-K RθJA 65.2 °C/W NDC (SOT-223) 5 pins 5
Junction-to-case (top) thermal resistance RθJC(top) 47.2 °C/W NDC 5 pins 5
Junction-to-board thermal resistance RθJB 9.9 °C/W NDC 5 pins 5
Junction-to-top characterization parameter ψJT 3.4 °C/W NDC 5 pins 5
Junction-to-board characterization parameter ψJB 9.7 °C/W NDC 5 pins 5

CAD (KiCad official)

  • Symbol: LP3855EMP-3.3
  • Footprint: Package_TO_SOT_SMD:SOT-223-5
  • 3D model: SOT-223-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.45 mm nominal SOT height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
  • 3D model files: lp3855emp-3-3-etched.step / lp3855emp-3-3-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp3855emp-3-3.step / lp3855emp-3-3.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (33 pp, sha256 70f996638bd5e2ad, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF