3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLP3855EMP-3.3
Texas Instruments · Linear Voltage Regulators (LDO) · SOT-223-5
LP3855EMP-3.3 from Texas Instruments, in a SOT-223-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SD | input | Shutdown input, must be pulled high through a 10-kΩ pull-up resistor, with recommended voltage of −0.3 V to 7 V. |
| 2 | IN | power_in | Input supply, recommended 2.5 V to 7 V (survival rating 7.5 V). |
| 3 | OUT | power_out | Regulated 3.3 V output voltage, specified for up to 1.5 A DC output current. |
| 4 | SENSE | input | Remote sense pin that improves regulation at remote loads, with maximum voltage of VOUT. |
| 5 | GND | power_in | Ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-223-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage tolerance | VOUT | -1.5 | 0 | 1.5 | % | VOUT+1 V ≤ VIN ≤ 7 V, 10 mA ≤ IOUT ≤ 1.5 A | 6 |
| Output voltage tolerance over temperature | VOUT | -3 | 3 | % | VOUT+1 V ≤ VIN ≤ 7 V, 10 mA ≤ IOUT ≤ 1.5 A, -40°C ≤ TJ ≤ 125°C | 6 | |
| Dropout voltage SOT, 150 mA | VIN - VOUT | 26 | 35 | mV | IOUT = 150 mA | 6 | |
| Dropout voltage SOT, 150 mA over temperature | VIN - VOUT | 45 | mV | IOUT = 150 mA, -40°C ≤ TJ ≤ 125°C | 6 | ||
| Dropout voltage SOT, 1.5 A | VIN - VOUT | 260 | 320 | mV | IOUT = 1.5 A | 6 | |
| Dropout voltage SOT, 1.5 A over temperature | VIN - VOUT | 435 | mV | IOUT = 1.5 A, -40°C ≤ TJ ≤ 125°C | 6 | ||
| Ground pin current, 150 mA | IGND | 3 | 9 | mA | IOUT = 150 mA | 6 | |
| Ground pin current, 150 mA over temperature | IGND | 10 | mA | IOUT = 150 mA, -40°C ≤ TJ ≤ 125°C | 6 | ||
| Ground pin current, 1.5 A | IGND | 3 | 9 | mA | IOUT = 1.5 A | 6 | |
| Ground pin current, 1.5 A over temperature | IGND | 10 | mA | IOUT = 1.5 A, -40°C ≤ TJ ≤ 125°C | 6 | ||
| Ground pin current in shutdown | IGND | 0.01 | 10 | µA | VSD ≤ 0.3 V | 6 | |
| Ground pin current in shutdown over temperature | IGND | 50 | µA | -40°C ≤ TJ ≤ 85°C | 6 | ||
| Shutdown threshold, output ON | VSDT | 1.3 | 2 | V | Rising from 0.3 V, Output = ON, -40°C ≤ TJ ≤ 125°C | 6 | |
| Shutdown threshold, output OFF | VSDT | 0.3 | 1.3 | V | Falling from 2 V, Output = OFF, -40°C ≤ TJ ≤ 125°C | 6 | |
| Output voltage line regulation | ΔVOUT/ΔVIN | 0.02 | % | VOUT+1 V ≤ VIN ≤ 7 V | 6 | ||
| Output voltage load regulation | ΔVOUT/ΔIOUT | 0.06 | % | 10 mA ≤ IOUT ≤ 1.5 A | 6 | ||
| Peak output current | IOUT(PK) | 1.8 | A | VO ≥ VO(NOM), 4% | 6 | ||
| Short circuit current | ISC | 3.2 | A | 6 | |||
| Turnoff delay | TdOFF | 20 | µs | IOUT = 1.5 A | 6 | ||
| Turnon delay | TdON | 25 | µs | IOUT = 1.5 A | 6 | ||
| SD input current | ISD | 1 | nA | VSD = VIN | 6 | ||
| Ripple rejection | PSRR | 73 | dB | VIN = VOUT + 1 V, COUT = 10 µF, VOUT = 3.3V, f = 120 Hz | 7 | ||
| Ripple rejection | PSRR | 57 | dB | VIN = VOUT + 0.5 V, COUT = 10 µF, VOUT = 3.3V, f = 120 Hz | 7 | ||
| Output noise density | ρn(l/f) | 0.8 | µV | f = 120 Hz | 7 | ||
| Output noise voltage | en | 150 | µV (rms) | BW = 10Hz, 100 kHz, VOUT = 2.5 V | 7 | ||
| Output noise voltage | en | 100 | µV (rms) | BW = 300 Hz, 300 kHz, VOUT = 2.5 V | 7 | ||
| Input supply voltage (survival) | -0.3 | 7.5 | V | 5 | |||
| Shutdown input voltage (survival) | -0.3 | 7.5 | V | 5 | |||
| Output voltage (survival) | -0.3 | 6 | V | 5 | |||
| Lead temperature (soldering, 5 sec.) | 260 | °C | 5 | ||||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| ESD HBM | V(ESD) | -2000 | 2000 | V | Human-body model, ANSI/ESDA/JEDEC JS-001 | 5 | |
| Input supply voltage | VIN | 2.5 | 7 | V | 5 | ||
| Shutdown input voltage | VSD | -0.3 | 7 | V | 5 | ||
| Maximum operating current (DC) | 1.5 | A | 5 | ||||
| Junction temperature | TJ | -40 | 125 | °C | 5 | ||
| Junction-to-ambient thermal resistance, High-K | RθJA | 65.2 | °C/W | NDC (SOT-223) 5 pins | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 47.2 | °C/W | NDC 5 pins | 5 | ||
| Junction-to-board thermal resistance | RθJB | 9.9 | °C/W | NDC 5 pins | 5 | ||
| Junction-to-top characterization parameter | ψJT | 3.4 | °C/W | NDC 5 pins | 5 | ||
| Junction-to-board characterization parameter | ψJB | 9.7 | °C/W | NDC 5 pins | 5 |
CAD (KiCad official)
- Symbol:
LP3855EMP-3.3 - Footprint:
Package_TO_SOT_SMD:SOT-223-5 - 3D model: SOT-223-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.45 mm nominal SOT height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
lp3855emp-3-3-etched.step/lp3855emp-3-3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp3855emp-3-3.step/lp3855emp-3-3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (33 pp, sha256
70f996638bd5e2ad, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).