main
Ray Publish 0.1.0 da14bf8

LP2982IM5X-3.0

Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-5

LP2982IM5X-3.0 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 IN power_in Input voltage supply, operating range 2.1 V to 16 V (at least VOUT(NOM) + 1 V recommended), absolute maximum 16 V.
2 GND power_in Common ground (device substrate).
3 ON/OFF input Logic high enable input; pulling it low puts the device in sleep mode with less than 1 µA quiescent current, input range 0 V to 16 V.
4 BYPASS passive Bypass capacitor connection for low-noise operation, which reduces output noise to about 30 µV typical.
5 OUT power_out Regulated output voltage (3.0 V fixed for this version), with 50 mA ensured output current and short-circuit protection.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Management ICs
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage tolerance ΔVO -1.5 1.5 %VNOM IL = 1 mA 5
Output voltage tolerance ΔVO -2 2 %VNOM 1 mA < IL < 50 mA 5
Output voltage tolerance ΔVO -3.5 3.5 %VNOM 1 mA < IL < 50 mA, -40°C ≤ TJ ≤ 125°C 5
Output voltage line regulation ΔVO/ΔVIN 0.007 0.014 %/V VO(NOM) + 1 V ≤ VIN ≤ 16 V 5
Output voltage line regulation ΔVO/ΔVIN 0.032 %/V VO(NOM) + 1 V ≤ VIN ≤ 16 V, -40°C ≤ TJ ≤ 125°C 5
Dropout voltage VDO 1 3 mV IL = 0 mA 5
Dropout voltage VDO 5 mV IL = 0 mA, -40°C ≤ TJ ≤ 125°C 5
Dropout voltage VDO 7 10 mV IL = 1 mA 5
Dropout voltage VDO 15 mV IL = 1 mA, -40°C ≤ TJ ≤ 125°C 5
Dropout voltage VDO 40 60 mV IL = 10 mA 5
Dropout voltage VDO 90 mV IL = 10 mA, -40°C ≤ TJ ≤ 125°C 5
Dropout voltage VDO 120 150 mV IL = 50 mA 5
Dropout voltage VDO 225 mV IL = 50 mA, -40°C ≤ TJ ≤ 125°C 5
Dropout voltage VDO 180 225 mV IL = 80 mA 5
Dropout voltage VDO 325 mV IL = 80 mA, -40°C ≤ TJ ≤ 125°C 5
Ground pin current IGND 65 95 μA IL = 0 mA 5
Ground pin current IGND 125 μA IL = 0 mA, -40°C ≤ TJ ≤ 125°C 5
Ground pin current IGND 80 110 μA IL = 1 mA 5
Ground pin current IGND 170 μA IL = 1 mA, -40°C ≤ TJ ≤ 125°C 5
Ground pin current IGND 140 220 μA IL = 10 mA 5
Ground pin current IGND 460 μA IL = 10 mA, -40°C ≤ TJ ≤ 125°C 5
Ground pin current IGND 375 600 μA IL = 50 mA 5
Ground pin current IGND 1200 μA IL = 50 mA, -40°C ≤ TJ ≤ 125°C 5
Ground pin current IGND 525 750 μA IL = 80 mA 5
Ground pin current IGND 1400 μA IL = 80 mA, -40°C ≤ TJ ≤ 125°C 5
Ground pin current (shutdown) IGND 0.01 0.8 μA VON/OFF < 0.3 V 5
Ground pin current (shutdown) IGND 2 μA VON/OFF < 0.15 V, -40°C ≤ TJ ≤ 125°C 5
ON/OFF input voltage high (output ON) VON/OFF 1.4 V High = O/P ON 6
ON/OFF input voltage high (output ON) VON/OFF 1.6 V High = O/P ON, -40°C ≤ TJ ≤ 125°C 6
ON/OFF input voltage low (output OFF) VON/OFF 0.55 V Low = O/P OFF 6
ON/OFF input voltage low (output OFF) VON/OFF 0.15 V Low = O/P OFF, -40°C ≤ TJ ≤ 125°C 6
ON/OFF input current ION/OFF 0.01 μA VON/OFF = 0 V 6
ON/OFF input current ION/OFF -2 μA VON/OFF = 0 V, -40°C ≤ TJ ≤ 125°C 6
ON/OFF input current ION/OFF 5 μA VON/OFF = 5 V 6
ON/OFF input current ION/OFF 15 μA VON/OFF = 5 V, -40°C ≤ TJ ≤ 125°C 6
Peak output current IO(PK) 100 mA VOUT ≥ VO(NOM) − 5% 6
Output noise voltage (RMS) en 30 μV BW = 300 Hz to 50 kHz, COUT = 10 μF 6
Ripple rejection ΔVO/ΔVIN 45 dB ƒ = 1 kHz, COUT = 10 μF 6
Short-circuit current IO(MAX) 150 mA RL = 0 Ω (steady state) 6
Operating junction temperature TJ -40 125 °C 4
Input supply voltage VIN -0.3 16 V 4
Shutdown input voltage -0.3 16 V 4
Output voltage VOUT -0.3 9 V 4
Input-output voltage -0.3 16 V 4
Storage temperature Tstg -65 150 °C 4
ESD HBM V(ESD) -2000 2000 V Pins 1, 2 and 5 4
ESD HBM V(ESD) -1000 1000 V Pins 3 and 4 4
Operating junction temperature TJ -40 125 °C 4
Input supply voltage VIN 2.1 16 V 4
ON/OFF input voltage 0 16 V 4
Junction-to-ambient thermal resistance RθJA 175.7 °C/W DBV (SOT-23), High-K 5
Junction-to-case (top) thermal resistance RθJC(top) 121.8 °C/W DBV (SOT-23) 5
Junction-to-board thermal resistance RθJB 29.5 °C/W DBV (SOT-23) 5
Junction-to-top characterization parameter ψJT 16.1 °C/W DBV (SOT-23) 5
Junction-to-board characterization parameter ψJB 29 °C/W DBV (SOT-23) 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper On the LP2982 SOT-23 (DBV) package, the primary conduction path for heat is through the five leads to the PCB. The ground pin (pin 2) is attached directly to the back side of the die and should be acc 18

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LP2982IM5X-3.0
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lp2982im5x-3-0-etched.step / lp2982im5x-3-0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp2982im5x-3-0.step / lp2982im5x-3-0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (29 pp, sha256 596f49b125d578ad, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF