Generated by kicad-footprint-generator · KiCad file format 20260206
LP2982IM5X-3.0
Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-5
LP2982IM5X-3.0 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input voltage supply, operating range 2.1 V to 16 V (at least VOUT(NOM) + 1 V recommended), absolute maximum 16 V. |
| 2 | GND | power_in | Common ground (device substrate). |
| 3 | ON/OFF | input | Logic high enable input; pulling it low puts the device in sleep mode with less than 1 µA quiescent current, input range 0 V to 16 V. |
| 4 | BYPASS | passive | Bypass capacitor connection for low-noise operation, which reduces output noise to about 30 µV typical. |
| 5 | OUT | power_out | Regulated output voltage (3.0 V fixed for this version), with 50 mA ensured output current and short-circuit protection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage tolerance | ΔVO | -1.5 | 1.5 | %VNOM | IL = 1 mA | 5 | |
| Output voltage tolerance | ΔVO | -2 | 2 | %VNOM | 1 mA < IL < 50 mA | 5 | |
| Output voltage tolerance | ΔVO | -3.5 | 3.5 | %VNOM | 1 mA < IL < 50 mA, -40°C ≤ TJ ≤ 125°C | 5 | |
| Output voltage line regulation | ΔVO/ΔVIN | 0.007 | 0.014 | %/V | VO(NOM) + 1 V ≤ VIN ≤ 16 V | 5 | |
| Output voltage line regulation | ΔVO/ΔVIN | 0.032 | %/V | VO(NOM) + 1 V ≤ VIN ≤ 16 V, -40°C ≤ TJ ≤ 125°C | 5 | ||
| Dropout voltage | VDO | 1 | 3 | mV | IL = 0 mA | 5 | |
| Dropout voltage | VDO | 5 | mV | IL = 0 mA, -40°C ≤ TJ ≤ 125°C | 5 | ||
| Dropout voltage | VDO | 7 | 10 | mV | IL = 1 mA | 5 | |
| Dropout voltage | VDO | 15 | mV | IL = 1 mA, -40°C ≤ TJ ≤ 125°C | 5 | ||
| Dropout voltage | VDO | 40 | 60 | mV | IL = 10 mA | 5 | |
| Dropout voltage | VDO | 90 | mV | IL = 10 mA, -40°C ≤ TJ ≤ 125°C | 5 | ||
| Dropout voltage | VDO | 120 | 150 | mV | IL = 50 mA | 5 | |
| Dropout voltage | VDO | 225 | mV | IL = 50 mA, -40°C ≤ TJ ≤ 125°C | 5 | ||
| Dropout voltage | VDO | 180 | 225 | mV | IL = 80 mA | 5 | |
| Dropout voltage | VDO | 325 | mV | IL = 80 mA, -40°C ≤ TJ ≤ 125°C | 5 | ||
| Ground pin current | IGND | 65 | 95 | μA | IL = 0 mA | 5 | |
| Ground pin current | IGND | 125 | μA | IL = 0 mA, -40°C ≤ TJ ≤ 125°C | 5 | ||
| Ground pin current | IGND | 80 | 110 | μA | IL = 1 mA | 5 | |
| Ground pin current | IGND | 170 | μA | IL = 1 mA, -40°C ≤ TJ ≤ 125°C | 5 | ||
| Ground pin current | IGND | 140 | 220 | μA | IL = 10 mA | 5 | |
| Ground pin current | IGND | 460 | μA | IL = 10 mA, -40°C ≤ TJ ≤ 125°C | 5 | ||
| Ground pin current | IGND | 375 | 600 | μA | IL = 50 mA | 5 | |
| Ground pin current | IGND | 1200 | μA | IL = 50 mA, -40°C ≤ TJ ≤ 125°C | 5 | ||
| Ground pin current | IGND | 525 | 750 | μA | IL = 80 mA | 5 | |
| Ground pin current | IGND | 1400 | μA | IL = 80 mA, -40°C ≤ TJ ≤ 125°C | 5 | ||
| Ground pin current (shutdown) | IGND | 0.01 | 0.8 | μA | VON/OFF < 0.3 V | 5 | |
| Ground pin current (shutdown) | IGND | 2 | μA | VON/OFF < 0.15 V, -40°C ≤ TJ ≤ 125°C | 5 | ||
| ON/OFF input voltage high (output ON) | VON/OFF | 1.4 | V | High = O/P ON | 6 | ||
| ON/OFF input voltage high (output ON) | VON/OFF | 1.6 | V | High = O/P ON, -40°C ≤ TJ ≤ 125°C | 6 | ||
| ON/OFF input voltage low (output OFF) | VON/OFF | 0.55 | V | Low = O/P OFF | 6 | ||
| ON/OFF input voltage low (output OFF) | VON/OFF | 0.15 | V | Low = O/P OFF, -40°C ≤ TJ ≤ 125°C | 6 | ||
| ON/OFF input current | ION/OFF | 0.01 | μA | VON/OFF = 0 V | 6 | ||
| ON/OFF input current | ION/OFF | -2 | μA | VON/OFF = 0 V, -40°C ≤ TJ ≤ 125°C | 6 | ||
| ON/OFF input current | ION/OFF | 5 | μA | VON/OFF = 5 V | 6 | ||
| ON/OFF input current | ION/OFF | 15 | μA | VON/OFF = 5 V, -40°C ≤ TJ ≤ 125°C | 6 | ||
| Peak output current | IO(PK) | 100 | mA | VOUT ≥ VO(NOM) − 5% | 6 | ||
| Output noise voltage (RMS) | en | 30 | μV | BW = 300 Hz to 50 kHz, COUT = 10 μF | 6 | ||
| Ripple rejection | ΔVO/ΔVIN | 45 | dB | ƒ = 1 kHz, COUT = 10 μF | 6 | ||
| Short-circuit current | IO(MAX) | 150 | mA | RL = 0 Ω (steady state) | 6 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Input supply voltage | VIN | -0.3 | 16 | V | 4 | ||
| Shutdown input voltage | -0.3 | 16 | V | 4 | |||
| Output voltage | VOUT | -0.3 | 9 | V | 4 | ||
| Input-output voltage | -0.3 | 16 | V | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| ESD HBM | V(ESD) | -2000 | 2000 | V | Pins 1, 2 and 5 | 4 | |
| ESD HBM | V(ESD) | -1000 | 1000 | V | Pins 3 and 4 | 4 | |
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Input supply voltage | VIN | 2.1 | 16 | V | 4 | ||
| ON/OFF input voltage | 0 | 16 | V | 4 | |||
| Junction-to-ambient thermal resistance | RθJA | 175.7 | °C/W | DBV (SOT-23), High-K | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 121.8 | °C/W | DBV (SOT-23) | 5 | ||
| Junction-to-board thermal resistance | RθJB | 29.5 | °C/W | DBV (SOT-23) | 5 | ||
| Junction-to-top characterization parameter | ψJT | 16.1 | °C/W | DBV (SOT-23) | 5 | ||
| Junction-to-board characterization parameter | ψJB | 29 | °C/W | DBV (SOT-23) | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | On the LP2982 SOT-23 (DBV) package, the primary conduction path for heat is through the five leads to the PCB. The ground pin (pin 2) is attached directly to the back side of the die and should be acc | 18 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LP2982IM5X-3.0 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lp2982im5x-3-0-etched.step/lp2982im5x-3-0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp2982im5x-3-0.step/lp2982im5x-3-0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (29 pp, sha256
596f49b125d578ad, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).