main
Ray Publish 0.1.0 32dd189

LP2981AIM5X-3.3

Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-5

LP2981AIM5X-3.3 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN input Input voltage pin for the regulator.
2 GND power_in Common ground, connected to the device substrate.
3 ON/OFF input Logic high enable input; pulling this pin low puts the regulator into sleep mode with less than 1 µA quiescent current.
4 NC unconnected Do not connect; pin 4 is reserved for post-packaging test and calibration of the VOUT accuracy and must not be tied to any potential or to ground.
5 OUT output Regulated output voltage pin.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage tolerance ΔVO -0.75 0.75 %VNOM IL = 1 mA 5
Output voltage tolerance ΔVO -1 1 %VNOM 1 mA < IL < 100 mA 5
Output voltage tolerance ΔVO -2.5 2.5 %VNOM 1 mA < IL < 100 mA, -40°C ≤ TJ ≤ 125°C 5
Output voltage line regulation ΔVO/ΔVIN 0.007 0.014 %/V VO(NOM) + 1 V ≤ VIN ≤ 16 V 5
Output voltage line regulation ΔVO/ΔVIN 0.032 %/V VO(NOM) + 1 V ≤ VIN ≤ 16 V, -40°C ≤ TJ ≤ 125°C 5
Dropout voltage VIN, VO 1 3 mV IL = 0 mA 5
Dropout voltage VIN, VO 5 mV IL = 0 mA, -40°C ≤ TJ ≤ 125°C 5
Dropout voltage VIN, VO 7 10 mV IL = 1 mA 5
Dropout voltage VIN, VO 15 mV IL = 1 mA, -40°C ≤ TJ ≤ 125°C 5
Dropout voltage VIN, VO 70 100 mV IL = 25 mA 5
Dropout voltage VIN, VO 150 mV IL = 25 mA, -40°C ≤ TJ ≤ 125°C 5
Dropout voltage VIN, VO 200 250 mV IL = 100 mA 5
Dropout voltage VIN, VO 375 mV IL = 100 mA, -40°C ≤ TJ ≤ 125°C 5
Ground pin current IGND 65 95 µA IL = 0 mA 5
Ground pin current IGND 125 µA IL = 0 mA, -40°C ≤ TJ ≤ 125°C 5
Ground pin current IGND 80 110 µA IL = 1 mA 5
Ground pin current IGND 170 µA IL = 1 mA, -40°C ≤ TJ ≤ 125°C 5
Ground pin current IGND 200 300 µA IL = 25 mA 5
Ground pin current IGND 550 µA IL = 25 mA, -40°C ≤ TJ ≤ 125°C 5
Ground pin current IGND 600 800 µA IL = 100 mA 5
Ground pin current IGND 1500 µA IL = 100 mA, -40°C ≤ TJ ≤ 125°C 5
Shutdown current (parameter label not in extracted text) 0.01 0.8 µA VON/OFF < 0.3 V 5
Shutdown current (parameter label not in extracted text) 0.05 2 µA VON/OFF < 0.15 V, -40°C ≤ TJ ≤ 125°C 5
ON/OFF input voltage (high, output ON) VON/OFF 1.4 V High = O/P ON 6
ON/OFF input voltage (high, output ON) VON/OFF 1.6 V High = O/P ON, -40°C ≤ TJ ≤ 125°C 6
ON/OFF input voltage (low, output OFF) VON/OFF 0.5 V Low = O/P OFF 6
ON/OFF input voltage (low, output OFF) VON/OFF 0.15 V Low = O/P OFF, -40°C ≤ TJ ≤ 125°C 6
ON/OFF input current ION/OFF -1 µA VON/OFF = 0 V, -40°C ≤ TJ ≤ 125°C 6
ON/OFF input current ION/OFF 15 µA VON/OFF = 5 V, -40°C ≤ TJ ≤ 125°C 6
Peak output current IO(PK) 150 400 mA VOUT ≥ VO(NOM) − 5% 6
Operating junction temperature -40 125 °C 4
Input supply voltage (operating) 2.1 16 V 4
Operating junction temperature -40 125 °C 4
Input supply voltage (survival) -0.3 16 V 4
Input supply voltage (operating) 2.1 16 V 4
Shutdown input voltage (survival) -0.3 16 V 4
Output voltage (survival) -0.3 9 V 4
Input-output voltage (survival) -0.3 16 V 4
Storage temperature -65 150 °C 4
Junction-to-ambient thermal resistance (RθJA) RθJA 175.7 °C/W High-K, DBV (SOT-23) 5 pins 5
Junction-to-case (top) thermal resistance RθJC(top) 78 °C/W DBV (SOT-23) 5 pins 5
Junction-to-board thermal resistance RθJB 30.8 °C/W DBV (SOT-23) 5 pins 5
Junction-to-top characterization parameter ψJT 2.8 °C/W DBV (SOT-23) 5 pins 5
Junction-to-board characterization parameter ψJB 30.3 °C/W DBV (SOT-23) 5 pins 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper capacitors, and to the LDO ground pin as close to each other as possible, connected by a wide, component-side, copper surface. The use of vias and long traces to create LDO circuit connections is stro 20

CAD (KiCad official)

  • Symbol: LP2981AIM5X-3.3
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: lp2981aim5x-3-3-etched.step / lp2981aim5x-3-3-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp2981aim5x-3-3.step / lp2981aim5x-3-3.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (32 pp, sha256 fe678555da4f251f, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF