component
LP2981AIM5X-3.3
Public Made by Adomby adom
Texas Instruments Linear Voltage Regulators (LDO), SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
LP2981AIM5X-3.3
Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-5
LP2981AIM5X-3.3 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | input | Input voltage pin for the regulator. |
| 2 | GND | power_in | Common ground, connected to the device substrate. |
| 3 | ON/OFF | input | Logic high enable input; pulling this pin low puts the regulator into sleep mode with less than 1 µA quiescent current. |
| 4 | NC | unconnected | Do not connect; pin 4 is reserved for post-packaging test and calibration of the VOUT accuracy and must not be tied to any potential or to ground. |
| 5 | OUT | output | Regulated output voltage pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage tolerance | ΔVO | -0.75 | 0.75 | %VNOM | IL = 1 mA | 5 | |
| Output voltage tolerance | ΔVO | -1 | 1 | %VNOM | 1 mA < IL < 100 mA | 5 | |
| Output voltage tolerance | ΔVO | -2.5 | 2.5 | %VNOM | 1 mA < IL < 100 mA, -40°C ≤ TJ ≤ 125°C | 5 | |
| Output voltage line regulation | ΔVO/ΔVIN | 0.007 | 0.014 | %/V | VO(NOM) + 1 V ≤ VIN ≤ 16 V | 5 | |
| Output voltage line regulation | ΔVO/ΔVIN | 0.032 | %/V | VO(NOM) + 1 V ≤ VIN ≤ 16 V, -40°C ≤ TJ ≤ 125°C | 5 | ||
| Dropout voltage | VIN, VO | 1 | 3 | mV | IL = 0 mA | 5 | |
| Dropout voltage | VIN, VO | 5 | mV | IL = 0 mA, -40°C ≤ TJ ≤ 125°C | 5 | ||
| Dropout voltage | VIN, VO | 7 | 10 | mV | IL = 1 mA | 5 | |
| Dropout voltage | VIN, VO | 15 | mV | IL = 1 mA, -40°C ≤ TJ ≤ 125°C | 5 | ||
| Dropout voltage | VIN, VO | 70 | 100 | mV | IL = 25 mA | 5 | |
| Dropout voltage | VIN, VO | 150 | mV | IL = 25 mA, -40°C ≤ TJ ≤ 125°C | 5 | ||
| Dropout voltage | VIN, VO | 200 | 250 | mV | IL = 100 mA | 5 | |
| Dropout voltage | VIN, VO | 375 | mV | IL = 100 mA, -40°C ≤ TJ ≤ 125°C | 5 | ||
| Ground pin current | IGND | 65 | 95 | µA | IL = 0 mA | 5 | |
| Ground pin current | IGND | 125 | µA | IL = 0 mA, -40°C ≤ TJ ≤ 125°C | 5 | ||
| Ground pin current | IGND | 80 | 110 | µA | IL = 1 mA | 5 | |
| Ground pin current | IGND | 170 | µA | IL = 1 mA, -40°C ≤ TJ ≤ 125°C | 5 | ||
| Ground pin current | IGND | 200 | 300 | µA | IL = 25 mA | 5 | |
| Ground pin current | IGND | 550 | µA | IL = 25 mA, -40°C ≤ TJ ≤ 125°C | 5 | ||
| Ground pin current | IGND | 600 | 800 | µA | IL = 100 mA | 5 | |
| Ground pin current | IGND | 1500 | µA | IL = 100 mA, -40°C ≤ TJ ≤ 125°C | 5 | ||
| Shutdown current (parameter label not in extracted text) | 0.01 | 0.8 | µA | VON/OFF < 0.3 V | 5 | ||
| Shutdown current (parameter label not in extracted text) | 0.05 | 2 | µA | VON/OFF < 0.15 V, -40°C ≤ TJ ≤ 125°C | 5 | ||
| ON/OFF input voltage (high, output ON) | VON/OFF | 1.4 | V | High = O/P ON | 6 | ||
| ON/OFF input voltage (high, output ON) | VON/OFF | 1.6 | V | High = O/P ON, -40°C ≤ TJ ≤ 125°C | 6 | ||
| ON/OFF input voltage (low, output OFF) | VON/OFF | 0.5 | V | Low = O/P OFF | 6 | ||
| ON/OFF input voltage (low, output OFF) | VON/OFF | 0.15 | V | Low = O/P OFF, -40°C ≤ TJ ≤ 125°C | 6 | ||
| ON/OFF input current | ION/OFF | -1 | µA | VON/OFF = 0 V, -40°C ≤ TJ ≤ 125°C | 6 | ||
| ON/OFF input current | ION/OFF | 15 | µA | VON/OFF = 5 V, -40°C ≤ TJ ≤ 125°C | 6 | ||
| Peak output current | IO(PK) | 150 | 400 | mA | VOUT ≥ VO(NOM) − 5% | 6 | |
| Operating junction temperature | -40 | 125 | °C | 4 | |||
| Input supply voltage (operating) | 2.1 | 16 | V | 4 | |||
| Operating junction temperature | -40 | 125 | °C | 4 | |||
| Input supply voltage (survival) | -0.3 | 16 | V | 4 | |||
| Input supply voltage (operating) | 2.1 | 16 | V | 4 | |||
| Shutdown input voltage (survival) | -0.3 | 16 | V | 4 | |||
| Output voltage (survival) | -0.3 | 9 | V | 4 | |||
| Input-output voltage (survival) | -0.3 | 16 | V | 4 | |||
| Storage temperature | -65 | 150 | °C | 4 | |||
| Junction-to-ambient thermal resistance (RθJA) | RθJA | 175.7 | °C/W | High-K, DBV (SOT-23) 5 pins | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 78 | °C/W | DBV (SOT-23) 5 pins | 5 | ||
| Junction-to-board thermal resistance | RθJB | 30.8 | °C/W | DBV (SOT-23) 5 pins | 5 | ||
| Junction-to-top characterization parameter | ψJT | 2.8 | °C/W | DBV (SOT-23) 5 pins | 5 | ||
| Junction-to-board characterization parameter | ψJB | 30.3 | °C/W | DBV (SOT-23) 5 pins | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | capacitors, and to the LDO ground pin as close to each other as possible, connected by a wide, component-side, copper surface. The use of vias and long traces to create LDO circuit connections is stro | 20 |
CAD (KiCad official)
- Symbol:
LP2981AIM5X-3.3 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
lp2981aim5x-3-3-etched.step/lp2981aim5x-3-3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp2981aim5x-3-3.step/lp2981aim5x-3-3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
fe678555da4f251f, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).