main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lp2980aim5-2-5: viewers · Ray
lp2980aim5-2-5-etched.glb Publish 0.1.0 · Ray
lp2980aim5-2-5-etched.step lp2980aim5-2-5: factory component page (tier=mfr) · Ray
lp2980aim5-2-5-hero.glb lp2980aim5-2-5: hero GLB from the etched model (keeps the MPN mark) · Ray
lp2980aim5-2-5-hero.overlay.json Publish 0.1.0 · Ray
lp2980aim5-2-5.glb Publish 0.1.0 · Ray
lp2980aim5-2-5.kicad_mod Publish 0.1.0 · Ray
lp2980aim5-2-5.kicad_sym Publish 0.1.0 · Ray
lp2980aim5-2-5.lbr Publish 0.1.0 · Ray
lp2980aim5-2-5.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 5 pins · Ray

LP2980AIM5-2.5

Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-5

LP2980AIM5-2.5 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Input voltage pin supplying the regulator, with an input supply range of 2.1 V to 16 V.
2 GND power_in Common ground connection, tied to the device substrate.
3 ON/OFF input Logic high enable input that switches the regulator on when driven high.
4 N/C unconnected Reserved for factory calibration and must be left floating, not connected to any potential or to ground.
5 OUT power_out Regulated output voltage pin.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage tolerance ΔVO -0.5 0.5 %VNOM IL = 1 mA 5
Output voltage tolerance ΔVO -0.75 0.75 %VNOM 1 mA < IL < 50 mA 5
Output voltage tolerance ΔVO -2.5 2.5 %VNOM 1 mA < IL < 50 mA, -40°C ≤ TJ ≤ 125°C 5
Output voltage line regulation 0.007 0.014 %/V VO(NOM) + 1 V ≤ VIN ≤ 16 V 5
Output voltage line regulation 0.007 0.032 %/V VO(NOM) + 1 V ≤ VIN ≤ 16 V, -40°C ≤ TJ ≤ 125°C 5
Dropout voltage VIN, VO 1 3 mV IL = 0 mA 5
Dropout voltage VIN, VO 1 5 mV IL = 0 mA, -40°C ≤ TJ ≤ 125°C 5
Dropout voltage VIN, VO 7 10 mV IL = 1 mA 5
Dropout voltage VIN, VO 7 15 mV IL = 1 mA, -40°C ≤ TJ ≤ 125°C 5
Dropout voltage VIN, VO 40 60 mV IL = 10 mA 5
Dropout voltage VIN, VO 40 90 mV IL = 10 mA, -40°C ≤ TJ ≤ 125°C 5
Dropout voltage VIN, VO 120 150 mV IL = 50 mA 5
Dropout voltage VIN, VO 120 225 mV IL = 50 mA, -40°C ≤ TJ ≤ 125°C 5
Ground pin current IGND 65 95 μA IL = 0 mA 5
Ground pin current IGND 65 125 μA IL = 0 mA, -40°C ≤ TJ ≤ 125°C 5
Ground pin current IGND 80 110 μA IL = 1 mA 5
Ground pin current IGND 80 170 μA IL = 1 mA, -40°C ≤ TJ ≤ 125°C 5
Ground pin current IGND 140 220 μA IL = 10 mA 5
Ground pin current IGND 140 460 μA IL = 10 mA, -40°C ≤ TJ ≤ 125°C 5
Ground pin current IGND 375 600 μA IL = 50 mA 5
Ground pin current IGND 375 1200 μA IL = 50 mA, -40°C ≤ TJ ≤ 125°C 5
ON/OFF input voltage high (output on) VON/OFF 1.6 V High = O/P ON 5
ON/OFF input voltage high (output on) VON/OFF 1.4 V High = O/P ON, -40°C ≤ TJ ≤ 125°C 5
ON/OFF input voltage low (output off) VON/OFF 0.55 V Low = O/P OFF 5
ON/OFF input voltage low (output off) VON/OFF 0.18 V Low = O/P OFF, -40°C ≤ TJ ≤ 125°C 5
Peak output current IO(PK) 100 150 mA VOUT ≥ VO(NOM) − 5% 6
Output noise voltage (RMS) en 160 μV BW = 300 Hz to 50 kHz, COUT = 10 μF 6
Ripple rejection ΔVOUT/ΔVIN 63 dB f = 1 kHz, COUT = 10 μF 6
Short-circuit current IO(MAX) 150 mA RL = 0 Ω (steady state) 7
Operating junction temperature TJ -40 125 °C 5
Input supply voltage VIN -0.3 16 V 5
Shutdown input voltage VON/OFF -0.3 16 V 5
Output voltage VOUT -0.3 9 V 5
Input-output voltage VIN, VOUT -0.3 16 V 5
Storage temperature Tstg -65 150 °C 5
Operating junction temperature TJ -40 125 °C 5
Input supply voltage VIN 2.1 16 V 5
Shutdown input voltage VON/OFF 0 V maximum is VIN 5
Junction-to-ambient thermal resistance RθJA 175.7 °C/W High K, JESD51-7 board 5
Junction-to-case (top) thermal resistance RθJC(top) 78 °C/W 5
Junction-to-board thermal resistance RθJB 30.8 °C/W 5
Junction-to-top characterization parameter ψJT 2.8 °C/W 5
Junction-to-board characterization parameter ψJB 30.3 °C/W 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper capacitors, and to the LDO ground pin as close as possible to each other, connected by a wide, component-side, copper surface. The use of vias and long traces to create LDO circuit connections is stro 23

CAD (KiCad official)

  • Symbol: LP2980AIM5-2.5
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: lp2980aim5-2-5-etched.step / lp2980aim5-2-5-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp2980aim5-2-5.step / lp2980aim5-2-5.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (35 pp, sha256 95426ce48328baff, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF