component
LP2980AIM5-2.5
Public Made by Adomby adom
Texas Instruments Linear Voltage Regulators (LDO), SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLP2980AIM5-2.5
Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-5
LP2980AIM5-2.5 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input voltage pin supplying the regulator, with an input supply range of 2.1 V to 16 V. |
| 2 | GND | power_in | Common ground connection, tied to the device substrate. |
| 3 | ON/OFF | input | Logic high enable input that switches the regulator on when driven high. |
| 4 | N/C | unconnected | Reserved for factory calibration and must be left floating, not connected to any potential or to ground. |
| 5 | OUT | power_out | Regulated output voltage pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage tolerance | ΔVO | -0.5 | 0.5 | %VNOM | IL = 1 mA | 5 | |
| Output voltage tolerance | ΔVO | -0.75 | 0.75 | %VNOM | 1 mA < IL < 50 mA | 5 | |
| Output voltage tolerance | ΔVO | -2.5 | 2.5 | %VNOM | 1 mA < IL < 50 mA, -40°C ≤ TJ ≤ 125°C | 5 | |
| Output voltage line regulation | 0.007 | 0.014 | %/V | VO(NOM) + 1 V ≤ VIN ≤ 16 V | 5 | ||
| Output voltage line regulation | 0.007 | 0.032 | %/V | VO(NOM) + 1 V ≤ VIN ≤ 16 V, -40°C ≤ TJ ≤ 125°C | 5 | ||
| Dropout voltage | VIN, VO | 1 | 3 | mV | IL = 0 mA | 5 | |
| Dropout voltage | VIN, VO | 1 | 5 | mV | IL = 0 mA, -40°C ≤ TJ ≤ 125°C | 5 | |
| Dropout voltage | VIN, VO | 7 | 10 | mV | IL = 1 mA | 5 | |
| Dropout voltage | VIN, VO | 7 | 15 | mV | IL = 1 mA, -40°C ≤ TJ ≤ 125°C | 5 | |
| Dropout voltage | VIN, VO | 40 | 60 | mV | IL = 10 mA | 5 | |
| Dropout voltage | VIN, VO | 40 | 90 | mV | IL = 10 mA, -40°C ≤ TJ ≤ 125°C | 5 | |
| Dropout voltage | VIN, VO | 120 | 150 | mV | IL = 50 mA | 5 | |
| Dropout voltage | VIN, VO | 120 | 225 | mV | IL = 50 mA, -40°C ≤ TJ ≤ 125°C | 5 | |
| Ground pin current | IGND | 65 | 95 | μA | IL = 0 mA | 5 | |
| Ground pin current | IGND | 65 | 125 | μA | IL = 0 mA, -40°C ≤ TJ ≤ 125°C | 5 | |
| Ground pin current | IGND | 80 | 110 | μA | IL = 1 mA | 5 | |
| Ground pin current | IGND | 80 | 170 | μA | IL = 1 mA, -40°C ≤ TJ ≤ 125°C | 5 | |
| Ground pin current | IGND | 140 | 220 | μA | IL = 10 mA | 5 | |
| Ground pin current | IGND | 140 | 460 | μA | IL = 10 mA, -40°C ≤ TJ ≤ 125°C | 5 | |
| Ground pin current | IGND | 375 | 600 | μA | IL = 50 mA | 5 | |
| Ground pin current | IGND | 375 | 1200 | μA | IL = 50 mA, -40°C ≤ TJ ≤ 125°C | 5 | |
| ON/OFF input voltage high (output on) | VON/OFF | 1.6 | V | High = O/P ON | 5 | ||
| ON/OFF input voltage high (output on) | VON/OFF | 1.4 | V | High = O/P ON, -40°C ≤ TJ ≤ 125°C | 5 | ||
| ON/OFF input voltage low (output off) | VON/OFF | 0.55 | V | Low = O/P OFF | 5 | ||
| ON/OFF input voltage low (output off) | VON/OFF | 0.18 | V | Low = O/P OFF, -40°C ≤ TJ ≤ 125°C | 5 | ||
| Peak output current | IO(PK) | 100 | 150 | mA | VOUT ≥ VO(NOM) − 5% | 6 | |
| Output noise voltage (RMS) | en | 160 | μV | BW = 300 Hz to 50 kHz, COUT = 10 μF | 6 | ||
| Ripple rejection | ΔVOUT/ΔVIN | 63 | dB | f = 1 kHz, COUT = 10 μF | 6 | ||
| Short-circuit current | IO(MAX) | 150 | mA | RL = 0 Ω (steady state) | 7 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 5 | ||
| Input supply voltage | VIN | -0.3 | 16 | V | 5 | ||
| Shutdown input voltage | VON/OFF | -0.3 | 16 | V | 5 | ||
| Output voltage | VOUT | -0.3 | 9 | V | 5 | ||
| Input-output voltage | VIN, VOUT | -0.3 | 16 | V | 5 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 5 | ||
| Input supply voltage | VIN | 2.1 | 16 | V | 5 | ||
| Shutdown input voltage | VON/OFF | 0 | V | maximum is VIN | 5 | ||
| Junction-to-ambient thermal resistance | RθJA | 175.7 | °C/W | High K, JESD51-7 board | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 78 | °C/W | 5 | |||
| Junction-to-board thermal resistance | RθJB | 30.8 | °C/W | 5 | |||
| Junction-to-top characterization parameter | ψJT | 2.8 | °C/W | 5 | |||
| Junction-to-board characterization parameter | ψJB | 30.3 | °C/W | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | capacitors, and to the LDO ground pin as close as possible to each other, connected by a wide, component-side, copper surface. The use of vias and long traces to create LDO circuit connections is stro | 23 |
CAD (KiCad official)
- Symbol:
LP2980AIM5-2.5 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
lp2980aim5-2-5-etched.step/lp2980aim5-2-5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp2980aim5-2-5.step/lp2980aim5-2-5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
95426ce48328baff, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).