main
Ray
Publish 0.1.1
29ea578
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167
{
"slug": "lp2951g-s08-r",
"version": "0.1.1",
"type": "component",
"description": "UTC Unisonic Tech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"pmic",
"lp2951g-s08-r"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lp2951g-s08-r.kicad_sym",
"lp2951g-s08-r.kicad_mod",
"lp2951g-s08-r.glb",
"lp2951g-s08-r.step",
"lp2951g-s08-r.lbr",
"docs/hero.png",
"docs/lp2951g-s08-r-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lp2951g-s08-r-etched.step",
"lp2951g-s08-r-hero.glb",
"lp2951g-s08-r-hero.overlay.json"
],
"visibility": "public",
"author": {
"name": "Ray"
},
"component": {
"mpn": "LP2951G-S08-R",
"manufacturer": "UTC Unisonic Tech",
"package": "SOP-8",
"pin_count": 8,
"category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
"parts": {
"symbol": "lp2951g-s08-r.kicad_sym",
"footprint": "lp2951g-s08-r.kicad_mod",
"model_3d": "lp2951g-s08-r-hero.glb",
"model_3d_plain": "lp2951g-s08-r.glb",
"model_3d_step": "lp2951g-s08-r-etched.step",
"model_3d_step_plain": "lp2951g-s08-r.step",
"lbr": "lp2951g-s08-r.lbr"
},
"pins": [
{
"number": "1",
"name": "OUTPUT",
"type": "power_out",
"description": "Regulated voltage output, up to 100mA. Connect to Sense (pin 2) at the load for remote sensing, or tie directly to Sense at the pin for local regulation. Requires a minimum output capacitor (typ. 1μF) for stability."
},
{
"number": "2",
"name": "SENSE",
"type": "input",
"description": "Output sense input for the internal error amplifier feedback path. Connect to VOUT at the load (Kelvin sense) to compensate for IR drops in the output trace; must be connected - typically tied to pin 1 for local sensing."
},
{
"number": "3",
"name": "SHUTDOWN",
"type": "input",
"description": "Active-high logic shutdown input, CMOS/TTL compatible. VIH ≥ 2.0V turns the regulator OFF; VIL ≤ 0.7V keeps it ON. Absolute max -0.3V to +30V; input current ~30μA at 2.4V, ~450μA at 30V."
},
{
"number": "4",
"name": "GND",
"type": "power_in",
"description": "Device ground reference. Typical ground current ~120μA at IL=100μA and ~12mA at IL=100mA."
},
{
"number": "5",
"name": "ERROR",
"type": "output",
"description": "Active-low, open-collector error flag output. Pulls low when the regulated output falls ~5% below nominal (out-of-regulation indicator). VOL ≤ 250mV at IOL = 400μA; leakage ≤ 1μA at VOH = 30V. Requires an external pull-up."
},
{
"number": "6",
"name": "5V TAP",
"type": "output",
"description": "Tap point on the internal feedback divider (182kΩ / 60kΩ) that produces the 1.235V reference-based 5V setpoint. Tie to FEEDBACK (pin 7) to use the internal divider for a fixed 5V output; leave open when programming a custom output voltage with external resistors on pin 7."
},
{
"number": "7",
"name": "FEEDBACK",
"type": "input",
"description": "Error-amplifier feedback input, regulated to the internal 1.235V reference (VREF 1.22-1.25V). For a fixed 5V output tie to pin 6 (5V TAP); for a programmable output use an external divider VOUT = 1.23V × (1 + R1/R2). IFB typ 20nA. Absolute max -1.5V to +30V."
},
{
"number": "8",
"name": "INPUT",
"type": "power_in",
"description": "Unregulated DC supply input. Operating range up to 30V (absolute max -0.3V to +30V). Dropout voltage typ 50mV at IL=100μA and 380mV at IL=100mA."
}
],
"provenance": {
"rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"distributor_links": {
"lcsc": "C484525",
"digikey": false,
"mouser": false
},
"distributor_check": {
"checked_at": "2026-10-05T19:05:48Z",
"source": "Component Ocean /api/assign-pns + lcsc_map",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"models_3d": [
{
"file": "lp2951g-s08-r.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lp2951g-s08-r-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "f9c0b9c4752df13808ec52f2061ed7785e7f5b44477352c9abc90ed8daa95e31",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"org": "adom"
}